Elektrics, Indicator, Adaptercable, Batteries and Accessories Yamaha Tenere 700
 

We are frequently asked about mounting of LED indicators on the Yamaha Tenere 700.
So we have a small guideline with usefull tipps here. The information about the relays concern all Tenere 700 (except World Raid) until model year 2022. From 2022 (World Raid) and from 2023 for all Tenere, Yamaha no longer installs a separate flasher relay. Here then helps in case of problem with a too high flashing frequency or faulty indicator light only the use of additional resistors.

Load Resistors or a Relay?
If you want to use one pair of LED turn signals - i.e. only at the front or only at the rear of the bike, one pair of resistors is sufficient.
Load Resistors

Flasher Relay
If you want to install LED turn signals at the front and rear of the bike, we recommend using the high quality LED indicator relay with a very low load range (less than 1W). With this relay the indicator light in the cockpit and the hazard warning lights work without any problems. No resistors are necessary, so installation is also much easier and less complicated. When using simple, low-priced relay, there may be problems with the indicator light in the dash board.
simple version Flasher Relay
high quality Flasher Relay

Indicator Adapters
For most aftermarket indicators you need adapter cables. This can be found here:
Indicator Adapter

Nice add-on - Rubber Cover
Rubber covers for a clean cover of the rear turn signals are recommended, especially when going off-road and dirt fly around. Just to make the installation perfect.
Rubber Covers

Indicator Brackets
For mounting almost all aftermarket turn signals in the front or rear, adapter sets are needed, otherwise the turn signals cannot be mounted in the big oval shaped openings of the fairing or tail. Sometims you do not need this adapters on the rear, e.g. if you use  a tail tidy kit.
Indicator Adpter Brackets

If you have any questions about this, feel free to contact us.

 

Elektrics, Indicator, Adaptercable, Batteries and Accessories Yamaha Tenere 700   We are frequently asked about mounting of LED indicators on the Yamaha Tenere 700. So... read more »
Close window
Elektrics, Indicator, Adaptercable, Batteries and Accessories Yamaha Tenere 700
 

We are frequently asked about mounting of LED indicators on the Yamaha Tenere 700.
So we have a small guideline with usefull tipps here. The information about the relays concern all Tenere 700 (except World Raid) until model year 2022. From 2022 (World Raid) and from 2023 for all Tenere, Yamaha no longer installs a separate flasher relay. Here then helps in case of problem with a too high flashing frequency or faulty indicator light only the use of additional resistors.

Load Resistors or a Relay?
If you want to use one pair of LED turn signals - i.e. only at the front or only at the rear of the bike, one pair of resistors is sufficient.
Load Resistors

Flasher Relay
If you want to install LED turn signals at the front and rear of the bike, we recommend using the high quality LED indicator relay with a very low load range (less than 1W). With this relay the indicator light in the cockpit and the hazard warning lights work without any problems. No resistors are necessary, so installation is also much easier and less complicated. When using simple, low-priced relay, there may be problems with the indicator light in the dash board.
simple version Flasher Relay
high quality Flasher Relay

Indicator Adapters
For most aftermarket indicators you need adapter cables. This can be found here:
Indicator Adapter

Nice add-on - Rubber Cover
Rubber covers for a clean cover of the rear turn signals are recommended, especially when going off-road and dirt fly around. Just to make the installation perfect.
Rubber Covers

Indicator Brackets
For mounting almost all aftermarket turn signals in the front or rear, adapter sets are needed, otherwise the turn signals cannot be mounted in the big oval shaped openings of the fairing or tail. Sometims you do not need this adapters on the rear, e.g. if you use  a tail tidy kit.
Indicator Adpter Brackets

If you have any questions about this, feel free to contact us.

 

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
1 From 6
No results were found for the filter!
LSK ABS Dongle Yamaha Tenere 700 LSK ABS Dongle Yamaha Tenere 700
ABS Off-Road Dongle Yamaha Tenere 700
ABS Off-Road Dongle Yamaha Tenere 700 Product Details Plug-and-play Dongle that adds the memory for ABS settings and eneables full control over ABS by stock "ABS" button. How it works The Dongle modifies the motorcycle's behavior to what...
€129.95 *

Ready to ship as of 09.04.2024

LSK ABS Dongle Yamaha Tenere 700 2019-2020 EURO4 (monochromes Display, weisser 4-pol. Diagn.Stecker) LSK ABS Dongle Yamaha Tenere 700 2019-2020 EURO4 (monochromes Display, weisser 4-pol. Diagn.Stecker)
ABS Off-Road Dongle Yamaha Tenere 700 2019-2020 EURO4 (monochromatic dashboard, white 4-pin diagnostic plug)
ABS Off-Road Dongle Yamaha Tenere 700 2019-2020 EURO4 (Monochromatic LCD dashboard, white 4-pin diagnostic plug) Product Details Plug-and-play Dongle that adds the memory for ABS settings and eneables full control over ABS by stock "ABS"...
€159.95 *

Ready to ship as of 16.05.2024

LSK ABS Dongle Yamaha Tenere 700 2021-2022 EURO5 (monochromes Display, roter 6-pol. Diag.Stecker) LSK ABS Dongle Yamaha Tenere 700 2021-2022 EURO5 (monochromes Display, roter 6-pol. Diag.Stecker)
ABS Off-Road Dongle Yamaha Tenere 700 2021-2022 & 2023 US EURO5 (monochromatic dashboard, red 6-pin diagnostic plug)
ABS Off-Road Dongle Yamaha Tenere 700 2021-2022 & 2023 US-models - EURO5 (monochromatic dashboard, red 6-pin diagnostic plug) Product Details Plug-and-play Dongle that adds the memory for ABS settings and eneables full control over ABS...
€159.95 *

Ready to ship as of 16.05.2024

ABS Sensor vorn mit Kabel Yamaha Tenere 700 ABS Sensor vorn mit Kabel Yamaha Tenere 700
ABS Sensor front with wire Yamaha Tenere 700
ABS Sensor front complete with wireing harness for the Yamaha Tenere 700 OEM part number: BW3-H5970-02-00 Fits all: Yamaha Tenere 700 2019 onwards
€116.95 *

Ready to ship in 1 workday(s)

ABS Sensor rear with wire Yamaha Tenere 700 ABS Sensor rear with wire Yamaha Tenere 700
ABS Sensor rear with wire Yamaha Tenere 700
ABS Sensor rear wheel complete with wireing harness for the Yamaha Tenere 700 OEM part number: BW3-H5980-01-00 Fits all: Yamaha Tenere 700 2019 onwards Yamaha Tenere 700 Rally 2020 onwards Yamaha Tenere 700 World Raid 2022 onwards Yamaha...
€122.95 *

Ready to ship in 1 workday(s)

Heizgriffe Daytona VI, 4-fach verstellbar, offene Enden, integr. Schalter, Battrieschutz Heizgriffe Daytona VI, 4-fach verstellbar, offene Enden, integr. Schalter, Battrieschutz
Daytona Heated grips VI with invisible switch and Battery Protection
Daytona VI heated grips with 4-Level integrated switch and Battery Protection DAYTONA VI heated-grips with nearly invisible integrated switch unit. The missing external switch is a great advantage e.g. on long trips, as there is a part...
€135.95 *

Ready to ship in 1 workday(s)

Dynojet Power Vision 3 Wideband CX Modul für Yamaha (Single Channel) Dynojet Power Vision 3 Wideband CX Modul für Yamaha (Single Channel)
Dynojet Power Vision 3 Wideband CX Kit for Yamaha (Single Channel)
Dynojet Power Vision 3 Wideband CX Kit Yamaha (Single Channel) It's almost like being on the dyno! Our Yamaha Wideband Kit for the Power Vision 3 adds a wideband sensor to your Yamaha vehicle, giving your ECU accurate air/fuel ratio...
€349.95 *

Ready to ship in 2 workday(s)

Dynojet Power Vision 3 Yamaha Tenere 700 2019-2020 (Euro4) Dynojet Power Vision 3 Yamaha Tenere 700 2019-2020 (Euro4)
Dynojet Power Vision Flash- and Tuning Modul Yamaha Tenere 700 Euro 4
Dynojet PV3 Yamaha Tenere 700 A Dynojet PV3 enables fuel tuning straight from your bike's diagnostic connector. You don't need to tear down your bike to access throttle body connections or tap into switched lines, or deal with sending...
€429.95 *

Ready to ship in 1 workday(s)

Dynojet Power Vision 3 Yamaha Tenere 700 2022- (Euro5) Dynojet Power Vision 3 Yamaha Tenere 700 2022- (Euro5)
Dynojet Power Vision Flash- and Tuning Modul Yamaha Tenere 700 Euro 5
A Dynojet PV3 enables fuel tuning straight from your bike's diagnostic connector. You don't need to tear down your bike to access throttle body connections or tap into switched lines, or deal with sending off your ECU. The PV3 simply...
€429.95 *

Ready to ship in 2 workday(s)

LED Blinkrelais, lastunabhängig, 0,1-100 Watt, 12 Volt, 2-polig LED Blinkrelais, lastunabhängig, 0,1-100 Watt, 12 Volt, 2-polig
Flasher relay for LED indicators 0,1 - 100 watts
Frequency stabilised flasher relay for LED indicators with a switching capacity of 0.1-100 watts. Water and shock resistant, for use with combination of standart 21w and LED indicators or only with LED indicators. Works also on bikes...
€17.95 *

Ready to ship in 1 workday(s)

LED Blinkrelais, lastunabhängig, 0,1-100 Watt, 12 Volt, 2-polig mit Masseanschluss LED Blinkrelais, lastunabhängig, 0,1-100 Watt, 12 Volt, 2-polig mit Masseanschluss
Flasher relay for LED indicators 0.1-100 watt
Frequency stabilised flasher relay for LED indicators with load range from 0.1-100 watts Especially when you have problems with the dash board lights this relay is be the solution. Water and shock resistant, for use with combination of...
€29.95 *

Ready to ship in 1 workday(s)

Nebelscheinwerfer Montage Kit für hohe Montage Yamaha Tenere 700 World Raid Nebelscheinwerfer Montage Kit für hohe Montage Yamaha Tenere 700 World Raid
Front Fog Light Stay Kit high mount position Yamaha Tenere 700 World Raid
Steel made LED Fog Light mounting kit for high mount position. Black power coated. Features • High grade material and manufacturing • easy installation • black powdercoated steel • needed LED Fog Lights not included. See Accessories Fits...
€64.95 *

Ready to ship in 5 workday(s)

1 From 6
Viewed