Tenere_700_RALLY_233


In 2023, OFF-THE-ROAD participated in the Tuareg Rally, the second largest African rally besides the Africa Eco Race, with a Yamaha Tenere 700. With more than 110 motor bikes and 60 cars, SSVs and quads, the Tuareg Rally is an important event in the rally sector.

The Tenere 700 we used was completely customised for the event and the rider. With a Tractive Suspension Rally PRO shock absorber with 230 mm travel and a newly developed Kayaba Factory 48mm Closed Cartridge fork with a remarkable 280 mm travel, even the fastest passages at more than 120 km/h did not pose any problem for the Tenere. This was also supported by the extremely torsion-resistant, milled triple clamp with 2-fold clamping on the upper triple clamp and 3-fold clamping on the lower triple clamp.

The brake system was completely modified and the ABS removed. The front is now equipped with a single-disc system with a 298 mm brake disc and an adapted Brembo brake pump. Thanks to the newly designed and milled fork legs, the good standard brake caliper of the Tenere could still be used.
For the rear, we chose a new brake pump with integrated bleed reservoir and modified gear ratio.

In the cockpit, a newly developed and completely redesigned Rally stem carries all the navigation instruments. The Rally Tower used will soon be available for order in the webshop. If you are interested, please have a look at the news.
A F2R RB850 roadbook holder in combination with a RNS TripMaster GFX v2 PRO in our opinion are the best components in the field of navigation, therefore we went for these components.

The navigation components are controlled by an RNS MultiSwitch 3 and the power is supplied centrally via a F2R Rallye Power Box.

All components used (except for the tested prototype components and custom-made parts) are listed below for easy ordering.
Some of the components listed, such as the brake pump or clutch fitting, are not plug-and-play - please enquire with us before ordering.

If you have any questions about tyres, the mousse used, suspension upgrade and tuning or the bike in general, please do not hesitate to contact us by phone or e-mail.


Link to the Tuareg Rallye

We were perfectly supported by the Rally Assistance Team MEMO-TOURS: Memo Tours

In 2023, OFF-THE-ROAD participated in the Tuareg Rally, the second largest African rally besides the Africa Eco Race, with a Yamaha Tenere 700. With more than 110 motor bikes and 60 cars, SSVs... read more »
Close window


In 2023, OFF-THE-ROAD participated in the Tuareg Rally, the second largest African rally besides the Africa Eco Race, with a Yamaha Tenere 700. With more than 110 motor bikes and 60 cars, SSVs and quads, the Tuareg Rally is an important event in the rally sector.

The Tenere 700 we used was completely customised for the event and the rider. With a Tractive Suspension Rally PRO shock absorber with 230 mm travel and a newly developed Kayaba Factory 48mm Closed Cartridge fork with a remarkable 280 mm travel, even the fastest passages at more than 120 km/h did not pose any problem for the Tenere. This was also supported by the extremely torsion-resistant, milled triple clamp with 2-fold clamping on the upper triple clamp and 3-fold clamping on the lower triple clamp.

The brake system was completely modified and the ABS removed. The front is now equipped with a single-disc system with a 298 mm brake disc and an adapted Brembo brake pump. Thanks to the newly designed and milled fork legs, the good standard brake caliper of the Tenere could still be used.
For the rear, we chose a new brake pump with integrated bleed reservoir and modified gear ratio.

In the cockpit, a newly developed and completely redesigned Rally stem carries all the navigation instruments. The Rally Tower used will soon be available for order in the webshop. If you are interested, please have a look at the news.
A F2R RB850 roadbook holder in combination with a RNS TripMaster GFX v2 PRO in our opinion are the best components in the field of navigation, therefore we went for these components.

The navigation components are controlled by an RNS MultiSwitch 3 and the power is supplied centrally via a F2R Rallye Power Box.

All components used (except for the tested prototype components and custom-made parts) are listed below for easy ordering.
Some of the components listed, such as the brake pump or clutch fitting, are not plug-and-play - please enquire with us before ordering.

If you have any questions about tyres, the mousse used, suspension upgrade and tuning or the bike in general, please do not hesitate to contact us by phone or e-mail.


Link to the Tuareg Rallye

We were perfectly supported by the Rally Assistance Team MEMO-TOURS: Memo Tours

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 4
No results were found for the filter!
Acerbis Rally Profile inkl. Anbaukit für Yamaha Tenere 700 Acerbis Rally Profile inkl. Anbaukit für Yamaha Tenere 700
Acerbis handguards Rally Profile incl. mounting kit Yamaha Tenere 700
Acerbis Rally Profile Handguards - Acerbis Adventure and Enduro Handguards. Sturdy and lightweight handguards made of Polypropylen. The Rally Profile is designed to be lightweight yet still offering excellent protection available. A...
€59.95 *

Delivery time approx. 5 days

Acerbis X-Grip Rahmenprotektoren Yamaha Tenere 700 Acerbis X-Grip Rahmenprotektoren Yamaha Tenere 700
Acerbis X-Grip Frame Protector Yamaha Tenere 700 / World Raid
Acerbis X-Grip frame protector Yamaha Tenere 700 The frame parts above the footrests are quickly damaged by dirt and sand, especially in off-road use. The boots virtually grind the paint off the frame with the help of dust and sand. The...
€57.95 *

Ready to ship in 1 workday(s)

Acerbis X-Power Motor Deckelschutz, Kunststoff, Yamaha Tenere 700 Acerbis X-Power Motor Deckelschutz, Kunststoff, Yamaha Tenere 700
Acerbis X-Power Engine Protection Cover Yamaha Tenere 700
Acerbis X-Power Engine Protection Cover made from plastic for the Yamaha Tenere 700 The new X-Power protection for engine covers. Optimal fit, for easy installation. Protection for engine crankcases and ignition/clutch covers, protecting...
€69.95 *

Ready to ship in 1 workday(s)

Brembo Handbremshebel PS11, 129 mm, silber Brembo Handbremshebel PS11, 129 mm, silber
Brembo front brake lever, PS11, 129 mm, silver
Brembo front brake lever. Fits e.g. PS11. Length 129 mm, colour: silver Specifications: Material: Aluminium Length: 129 mm Colour: silver
€32.95 *

Ready to ship as of 17.09.2023

Brembo Handbremspumpe PS11 mit Behälter und Bremslichtschalter Brembo Handbremspumpe PS11 mit Behälter und Bremslichtschalter
Brembo PS11 front brake pump with fluid container and brake light switch
Brembo PS11 front brake master cylinder including brake light switch Technische Daten: Material: Aluminium Piston diameter 11 mm integrated brake fluid tank brake lever type: adjustable, silver including brake light switch Brake fluid...
€169.95 *

Ready to ship in 1 workday(s)

Schaltstange Carbon Yamaha Tenere 700, eloxiert Schaltstange Carbon Yamaha Tenere 700, eloxiert
Carbon Shift Rod Tenere 700
Extremely lightweight carbon shift rod for the Yamaha Tenere 700, Rally and World Raid. Connectors to the gear lever and made of high-strength 7075 aluminum CNC and anodized in various colors to protect against corrosion. In addition to...
€49.95 *

Ready to ship in 1 workday(s)

Kettenführung 2.0 Acerbis Yamaha Tenere 700, Kunststoff Kettenführung 2.0 Acerbis Yamaha Tenere 700, Kunststoff
Chain guide 2.0 Acerbis Yamaha Tenere 700
The chain guide for Tenere is perfect for proventing damage of chain and sprocket while riding off-road. Easy to mount on the bottom of the left swing arm. Great protective effect, especially when driving off the paved roads. The guide...
€69.95 *

Ready to ship in 1 workday(s)

SBS Kupplungslamellen Upgrade Carbon Yamaha Tenere 700 / MT-07 / XSR 700 u.A. SBS Kupplungslamellen Upgrade Carbon Yamaha Tenere 700 / MT-07 / XSR 700 u.A.
Clutch friction discs SBS Carbon Yamaha Tenere 700
Extremely wear-resistant carbon clutch plate set for tough use. The clutch plates (friction discs) correspond to the original plates in dimensions and number of pieces. In contrast to standard clutch friction discs, the used material...
€179.95 *

Ready to ship in 1 workday(s)

DID 520 VX3 X-Ring Kette DID 520 VX3 X-Ring Kette
DID 520 VX3 X-Ring chain
The DID 520VX3 chain has an outstanding strength of 3720kg and is stronger than the 'former' 520VX3chain! The VX3 X-ring chains are the best choice for the most purpose and demanding applications. Among other characteristics, the VX3...
From €85.95 *

Ready to ship as of 10.10.2023

Kettenritzel, Stahl, 520, Yamaha Tenere 700 Zähne Kettenritzel, Stahl, 520, Yamaha Tenere 700 Zähne
Front sprocket Yamaha Tenere 700 - 520 pitch
520 pitch Racing Front sprockets Yamaha Tenere 700 520er pitch - does NOT fit with OEM size 525 Yamaha Tenere 700 chains Like almost all motorbikes in series trimm, the Tenere 700's transmission ratio is too long for a sportive manner of...
From €22.95 *

Ready to ship in 1 workday(s)

Schalthebel Yamaha Tenere 700, klappbar, verstellbar, schwarz eloxiert Schalthebel Yamaha Tenere 700, klappbar, verstellbar, schwarz eloxiert
Gear lever EVO, adjustable, Yamaha Tenere 700
Upgraded EVO version of the OTR gear lever for the Yamaha Tenere 700 - TUAREG RALLY TESTED! Foldable, aluminium cnc-machined and black anodised. Lightweight, stylish, folding aluminium gear lever for your Yamaha Tenere 700. This lever...
€129.95 *

Delivery time approx. 5 days

Vorderrad mit Haan Nabe und Excel Felge 1.85x21 Yamaha Tenere 700 Vorderrad mit Haan Nabe und Excel Felge 1.85x21 Yamaha Tenere 700
Haan front wheel with high strength Excel rim 1.85x21 Yamaha Tenere 700
Complete front wheel with 1.85x21 Excel rim and machine milled HAAN aluminium hubs for Yamaha Tenere 700 Front wheel in 21x1.85 inch size like the oem wheel. This wheel can be used with a tube only. For a tubeless wheel check the 21x2.15...
From €571.95 *

Delivery time see product text

1 From 4
Viewed