Acerbis Multiplo E handguards incl. mounting kit Yamaha XT-660Z, white

Precisely CNC machined and extreme strong RAID handlebar clamp set for 28 mm handlebars   The upper handlebar clamping plate provides a high torsional stiffness of the complete set. The handlebar height can be individually varied with additional spacers. The handlebar clamps are made eccentrically. This makes it possible to move the handlebar position forward or backward by 5 mm compared to the original.   We manufacture this clamps on modern cnc machines here in our own production. The clamps are made with an off-set, so it is possible to adjust handlebar posiotn 5mm to- or backward from rider. The avaiable versions are the height compared to the stock handlebar clamp height. Measured in mm between the lower end of the handlebar and the top of the triple clamps.   If the listed height is not enough for your needs, you can add additonal spacers shown in the 'accessories' section. New bolts are needed as well. OEM brake lines and clutch cables work up to a height 30mm more than stock.   Details:   made from aircraft aluminium 7075 T6 high torsional stiffness handlebar position can be changed +/- 5 mm hight can be adjusted individually color: silver or black anodised additional spacer to lower or rise avaiable. See accessories Made in Germany by OTR 10 years warranty sold as a set   Fits all:   universal

Off-centered handlebar mounting set for 22 mm handlebars   The excentric manufacturing offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The fully cnc machined clamping sets have a height of  30 mm (upper side of triple clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. So if you need a total height of e.g. 50 mm, choose the handlebar clamp (30 mm height) and add a 20 mm distance bushing.   Made of high grade aircraft aluminium, black or silver anodised. For needed distance bushings see accessories. Shown bushings not included!   Supplied M10 bolts have a free length  of 40 mm. If you have e.g. a 40 mm high triple clamp, these bolts will fit. If you need longer/shorter bolts, please order separately (see accessories).   Fits e.g. Yamaha XT-660R/X, XT-660Z Tenere, TT-600 (S/E/R/RE), XT-600, XT-550, XTz-660 any many more bikes with a bolt-on clamp set and 22 mm handlebar Please measure the needed height on your bike.   Tested, maximum possible heights with stock cables and wires:   Yamaha Tenere 700            -   90 mm Yamaha XT-660Z Tenere   -   70 mm Yamaha XTz-660                 -   70 mm Yamaha XT-660R/X            -   50 mm Yamaha TT-600                   -   50 mm Yamaha XT-600                   -   50 mm Yamaha XT-550                   -   50 mm   Color: silver or black anodised Price per pair Made in Germany by OTR with 10 years warranty! Shown spacers not included in delivery

Handlebar risers made of aluminium for Ø 22mm handlebars.   Especially for tall drivers or if driving in standing position. Aluminium, silver colour powder coated. Available with 15, 20, 25, 30 or 50 mm height. Delivered with all needed bolts and bolt covers.   Tested heights - no changes necessary on the listed bikes:   XT-660 R/X:                           15 to 30mm XT-660Z TENERE:                15 to 30mm XT-660ZA ABS TENERE:      15 to 20mm   With TÜV certificate for the 15-30mm version - 50mm version without TÜV papers. Please check if the certificate is valid for the coosen height of your bike!   Included:   Bar riser 15-50 mm for handlebars with Ø 22 mm Mounting material Mounting instructions Bike-specific approval (Streel legal in Europe) up to 30mm