EFFORTLESS MOUNTING – CLEAN SETUP   The Anchor Point for Hailstorm is designed to make mounting and removing the Hailstorm luggage systems as simple and clean as possible. It replaces the rear strap mounting with a fixed anchor solution, allowing the Hailstorm to be mounted at the rear of the motorcycle without straps or on bikes where no straps can be attached on the rear, while the front attachment is still secured using the Hailstorm straps as usual.   The system consists of two parts: a mounting plate that is fixed to the Hailstorm bag, and the Anchor Point itself, which is bolted to the rear of the motorcycle fender plastic or to a luggage rack / rear plate. All screws and nuts required for installation are included. Once installed, the Hailstorm can be mounted and removed at the rear in seconds – securely, reliably and with a clean setup on the bike.   Thanks to its minimalist and compact design, the Anchor Point remains discreet on the motorcycle and does not interfere with riding or other luggage setups when the bag is not mounted. It provides a practical solution for riders who want quick rear mounting with a tidy appearance on the motorcycle.   Scope of Delivery 1 × Anchor Point metal sheet 1 × Attachment point M6 4 × Ultra flathead screws M6 × 12 1 × Bolt M6 × 25 1 × Bolt M6 × 30 1 × Washer 6.4 × 20 × 1.5 mm 5 × Self-locking nuts M6   Features Replaces rear strap mounting with a fixed anchor solution Enables quick mounting and removal at the rear Front attachment remains secured with Hailstorm straps Mounts to the rear of the motorcycle or a luggage rack / rear plate Clean and minimalist design Compact size – does not interfere when not in use Secure and reliable attachment   Technical Specifications Weight       0.03 kg

CLEAN GEAR – ZERO HASSLE   The Inner Bags for Blizzard 2 (and Blizzard 1 S) are designed to make packing and unpacking easier and more comfortable when travelling with soft saddlebags. They allow you to remove all your gear in one go without taking the saddlebags off the motorcycle – ideal when setting up camp or checking into a hotel. When travelling off-road, the outer Blizzard 2 saddlebags often get dirty. The inner bags solve this problem by keeping your gear separate from the outside luggage, so you don’t have to bring dusty or muddy bags into your tent or accommodation. Simply pull out the inner bags and leave the saddlebags on the bike. The inner bags are made from a PVC-free, water-repellent material. This means it is no problem if you take them out in the rain or place them on wet grass – your gear stays protected. A carrying handle makes them easy to remove from the saddlebags, and for longer distances the Light Shoulder Strap can be attahed (shoulder strap not included). Used together with the Blizzard 2, the inner bags add comfort and organisation without changing the way the saddlebags are mounted or used on the motorcycle.   Sold as a pair (two bags)   Fits Blizzard 2.25 und Blizzard 1 size L   FEATURES Inner bags designed specifically for Blizzard 2 Keeps clean gear separate from dirty outer saddlebags PVC-free, water-repellent material and zippers Makes packing and unpacking faster and easier Allows all contents to be removed in one go Carrying handle for easy removal Attachment points for optional Light shoulder strap (not included)   SPECIFICATIONS   Size Blizzard 2.15 Volume 15 Liter (2 x 7.5) Liter Width 40 cm Height 29 cm Deepth 11 cm Weight      0.2 (2x 0.1) kg                                     

CLEAN GEAR – ZERO HASSLE   The Inner Bags for Blizzard 2 (and Blizzard 1 Large) are designed to make packing and unpacking easier and more comfortable when travelling with soft saddlebags. They allow you to remove all your gear in one go without taking the saddlebags off the motorcycle – ideal when setting up camp or checking into a hotel. When travelling off-road, the outer Blizzard 2 saddlebags often get dirty. The inner bags solve this problem by keeping your gear separate from the outside luggage, so you don’t have to bring dusty or muddy bags into your tent or accommodation. Simply pull out the inner bags and leave the saddlebags on the bike. The inner bags are made from a PVC-free, water-repellent material. This means it is no problem if you take them out in the rain or place them on wet grass – your gear stays protected. A carrying handle makes them easy to remove from the saddlebags, and for longer distances the Light Shoulder Strap can be attahed (shoulder strap not included). Used together with the Blizzard 2, the inner bags add comfort and organisation without changing the way the saddlebags are mounted or used on the motorcycle.   Sold as a pair (two bags)   Fits Blizzard 2.25 und Blizzard 1 size L   FEATURES Inner bags designed specifically for Blizzard 2 Keeps clean gear separate from dirty outer saddlebags PVC-free, water-repellent material and zippers Makes packing and unpacking faster and easier Allows all contents to be removed in one go Carrying handle for easy removal Attachment points for optional Light shoulder strap (not included)   SPECIFICATIONS   Size Blizzard 2.25 Volume 25 Liter (2 x 12.5) Liter Width 40 cm Height 29 cm Deepth 18.5 cm Weight      0.3 (2x 0.15) kg                                     

CLEAN GEAR – ZERO HASSLE   The Inner Bags for Blizzard 2 (and Blizzard 1 S) are designed to make packing and unpacking easier and more comfortable when travelling with soft saddlebags. They allow you to remove all your gear in one go without taking the saddlebags off the motorcycle – ideal when setting up camp or checking into a hotel. When travelling off-road, the outer Blizzard 2 saddlebags often get dirty. The inner bags solve this problem by keeping your gear separate from the outside luggage, so you don’t have to bring dusty or muddy bags into your tent or accommodation. Simply pull out the inner bags and leave the saddlebags on the bike. The inner bags are made from a PVC-free, water-repellent material. This means it is no problem if you take them out in the rain or place them on wet grass – your gear stays protected. A carrying handle makes them easy to remove from the saddlebags, and for longer distances the Light Shoulder Strap can be attahed (shoulder strap not included). Used together with the Blizzard 2, the inner bags add comfort and organisation without changing the way the saddlebags are mounted or used on the motorcycle.   Sold as a pair (two bags)   Fits Blizzard 2.35 and Blizzard 1 size XL   FEATURES Inner bags designed specifically for Blizzard 2 Keeps clean gear separate from dirty outer saddlebags PVC-free, water-repellent material and zippers Makes packing and unpacking faster and easier Allows all contents to be removed in one go Carrying handle for easy removal Attachment points for optional Light shoulder strap (not included)   SPECIFICATIONS   Size Blizzard 2.35 Volume 35 Liter (2 x 17.5) Liter Width 44 cm Height 34 cm Deepth 21.5 cm Weight      04 (2x 0.15) kg                                     

BLIZZARD 2 SADDLEBAGS – THE NEXTGENERATION   The Blizzard 2 Saddlebags have been completely redesigned based on the experiences and feedback from the first generation – now even more robust, lighter, and versatile. They stay securely on your motorcycle, even on the toughest tracks, without shifting or coming loose. The absolute highlight is the revolutionary, patented CRR Breakaway System (Crash-Replace-Ride On), which ensures that during a spectacular crash, the front attachment strap breaks away without damaging the bag or the strap itself. The CRR spare part included can be replaced in seconds without tools, making the bag immediately ready for action again. Forget damaged bags and dive fully into your adventure – and hopefully, the next crash won’t happen! Thanks to the new, extra tear- and abrasion-resistant Advanced 3-Layer Fabric, the Blizzard 2 Saddlebags are the perfect companions for demanding tours. Like all Enduristan products, they are fully waterproof, dustproof, and mudproof, ensuring your luggage stays protected in all weather conditions. A total of seven of our patented Attachment Pads provide extensive options for attaching extra bags such as the Bottle Holster, Can Holster, Fender Bag, or XS Base Pack. The Blizzard 2 Saddlebags are available in three sizes, with a total volume of 15, 25, or 35 liters.   CRASH – REPLACE – RIDE ON! In conventional saddlebags, the front attachment straps often tear during severe crashes. Such damage is almost impossible to repair on the go, and the bags often lose their waterproofness. The forces exerted during crashes in off-road conditions can reach several hundred kilograms. Handling these forces without damaging the bags or even the motorcycle is technically not always possible. That’s why we have equipped the Blizzard 2 Saddlebags with our patented CRR Breakaway System (Crash-Replace-Ride On), designed to sacrifice itself when forces exceed 200 kg to protect your saddlebags.   After the crash, you don’t have to worry about a damaged bag. Simply thread the spare part provided through the strap and continue your adventure. Each set of Blizzard 2 Saddlebags comes with four CRR spare parts.   HIGHEST ABRASION RESISTANCE ON THE MARKET The Advanced 3-Layer Fabric used in the Blizzard 2 Saddlebags significantly surpasses the material of the previous model and our competitors in terms of tear and abrasion resistance. No other material in our tests achieved better results – the abrasion resistance is 22% higher than the best competitor. It is not only extremely durable but also PVC- free and particularly lightweight.   The PVC-free material is more environmentally friendly, as no harmful chemicals are released during disposal. This keeps the Blizzard 2 lighter and more robust while also reducing the ecological footprint.   FLEXIBLE AND SECURE HOLD The Blizzard 2 Saddlebags offer you two different ways to securely attach them to the rear of your motorcycle. You can choose between the tried-and-tested strap system or the new Anchor-Lock System, where small aluminum attachment points are bolted to the rear. These are so compact that they won’t get in the way even when the bags are not mounted. The bags are then easily attached to these mounting points. The width adjustment has also been improved: the bags now sit even more securely and are easier to install and adjust compared to the first generation. Mounting under passenger grab handles is now no longer a problem. These versatile options ensure that the bags stay securely in place in any terrain and can be perfectly adjusted to different seat widths. Depending on the bike and the load of the bags, it might make sense to use the Enduristan Inferno heat protection. This effectively prevents the bag(s) from coming into contact with the hot surfaces of the silencer. See accessories.   EXPANDED MODULARITY You can individually expand the luggage volume of the bags by using the seven patented Attachment Pads – three on each bag and one on the seat. The interface on the seat is so thin that it doesn’t bother you while riding, even during off-road adventures when you slide backward. You can also ride with a passenger as long as no extra bags are mounted on the seat. Both bags have one Attachment Pad on a flap that additionally protects the roll closure. Under this flap, you will find a small zippered compartment on one side, ideal for storing documents or smaller items. On the other side are two elastic straps, perfect for storing spare gloves, a light rain jacket, or similar items that you want to have quickly accessible.   Features: Waterproof, dustproof, and mudproof: Protects your gear in all conditions Patented Breakaway System/Crash and Go: Easy repair after a crash without tools Modularity: Attachment points for extra bags like Bottle Holster, Can Holster, Fender Bag, XS Base Pack Lightweight and durable: Made from Advanced 3-Layer Fabric for maximum performance Highest Abrasion Resistance: Outperforms materials like Cordura® Easy Installation: Quick adjustment for different seat widths and flexible attachment options   TECH SPECS   Blizzard 2.15 Total Volume 15 Liter  (2 x 7.5 Liter) Length (per Bag) 40 cm Height (per Bag) 29 cm Wide (per Bag) 11 cm Total weight 2.20 kg Fender Bag and XS-Base Pack attachment possible Can- and Bottle Holster attachment possible   Blizzard 2.25 Total Volume 25 Liter  (2 x 12.5 Liter) Length (per Bag) 40 cm Height (per Bag) 29 cm Wide (per Bag) 21.5 cm Total weight 2.50 kg Fender Bag and XS-Base Pack attachment possible Can- and Bottle Holster attachment possible   Blizzard 2.35 Total Volume 35 Liter (2 x 17.5 Liter) Length (per Bag) 44 cm Height (per Bag) 34 cm Wide (per Bag) 21.5 cm Total weight 3.00 kg Fender Bag and XS-Base Pack attachment possible Can- and Bottle Holster attachment possible

ENDURISTAN INNER BAGS FOR BLIZZARD SADDLE BAGS   Suitable for the 2024 Blizzard 1 in M, L and XL and the new 2025 Blizzard 2.15, 2.25 and 2.35 versions   A day in the dirt, rain, or on a sandy track leaves its mark on your Blizzards! Of course, you don't want to take your dirty Blizzards into your tent or hotel room. That's why we developed the Inner Bags for the Blizzards. They are made of an incredibly robust single-layer fabric, which has already proven itself in our Isolation Bags. The zipper runs around the entire bag, packing the bag is a breeze and extremely comfortable.   The water-repellent zippers in combination with the welded construction allow you to take the Inner Bags out of your Blizzards even in the rain or put them on the wet floor without getting all your belongings wet. They come with a comfortable handle, so you can easily pull them out of your Blizzards. If the Inner Bags get dirty, you can easily clean them with water.   Sold as a pair (two bags)   FEATURES Handle for easy removal and transport of the bag All-round zipper Easy to clean Perfect fit Very light and durable   SPECIFICATIONS   Size M for Blizzard 1 Medium or Blizzard 2.15 Volume 17 Liter (2 x 8.5) Liter Width 39 cm Height 35 cm Deepth 12.5 cm Weight      0.22 (2x 0.11) kg   Size L for Blizzard 1 Lage or Blizzard 2.25 Volume 24 Liter (2 x 12) Liter Width 39 cm Height 35 cm Deepth 18 cm Weight 0.258 (2x 0.129) kg   Size XL for Blizzard 1 X-Lage or Blizzard 2.35 Volume 34 Liter (2 x 17) Liter Width 44 cm Height 37 cm Deepth 20.5 cm Weight 0.292 (2x 0.146) kg                                         

ENDURISTAN BOTTLE HOLSTER - EASILY CARRY FUEL OR WATER FUEL & WATER When traveling, we all need to carry water and on some occasions also extra fuel. The Enduristan Bottle Holster attaches to many different Enduristan bags and allows to carry fuel bottles as well as any other bottle. FEATURES · Secure pull-down strap for any type of bottle · Also secures bottles without ring type cap · Reflective print for better visibility · 2 drain holes in the floor · Can be attached to Blizzard Saddle Bags (4 different positions), Monsoon Panniers or Tornado Pack Sacks · Washable and easy to clean · Built to last SPECIFICATIONS · Diameter 9cm · Length 20cm · Max bottle length 32cm

Enduristan Can Holster - Care and Protect It's always important to regularly maintain your chain-especially on long travels, however there is nothing worse than a can of chain lube spilling out in your bags, ruining all your cloths and gear. To prevent this Enduristan invented the Can Holster. Secured to the outside of your luggage, it easily carries chain lube sprays and similar. Naturally, it can be attached to our Blizzards Saddle Bags, Monsoon 3 Panniers or Tornado Pack Sacks. Tech Specs · Dimensions: approx 20 x 9 cm · Max can diameter: 9 cm · Max can length: 25 cm  Features · Secure storage for any type of can or bottle · Reflective print for better visibility · 2 drain holes in the base · Washable and easy to clean · Built to last · Can be attached to Blizzard Saddle Bags (4 different positions), Monsoon 3 Panniers or Tornado Pack Sacks.

Enduristan Family Buckles Enduristan wanted the strongest buckles money could buy. So Enduristan approached the most respected manufacturers and asked them for their strongest buckles. Then they bought a few hundred of each and tested them. Destruction testing is the only way to find the limits of a buckle, and they did this without mercy. After ripping nearly 1,000 buckles to shreds - some at a freezing -20°C, others at a blistering 50°C - Enduristan had the winner. Today, the experience of thousands of Enduristan customers confirms that they made the right choice. After years of using them on all Enduristan products, they have regularly received requests to sell these products separately so that customers can modify soft luggage from other suppliers or replace other buckles with Enduristan's top quality. · A pack of 4 Enduristan Family Buckles · 4 female and 4 male buckles · Can be used to repair or replace or modify your Enduristan set up    

A pack of 2 Sandstorm tank bag fastening buckles and ties. These are used to secure the rear two straps of any Enduristan Sandstorm tank bag to the bikes frame. If you use your bag on more than one bike, then you'll need a set of these for your second bike. Fits with all Enduristan Sandstrom tankbags

IF ONE BIKE IS NO ENOUGH   A front fastening harness for all Enduristan Sandstorm tank bags.   Used to fasten the front of your Sandstorm tank bag around your bikes headstock.   If you use your tank bag on more than one bike then you'll need one of these for your other bike to make interchanging quick and easy.   If you only want to use Sandstorm 2E, 2S, 3E, 3S, 4A, 4E, 4H, 4X, 5.01, 5.03 or 5.06 with one motorcycle, you do not need this article - a fastening strap is already included with Sandstorm.   COMPATIBILITY This additional fastening strap is only compatible with the tank bags 2E, 2S, 3E, 3S, 4A, 4E, 4H, 4X, 5.01, 5.03 or 5.06

HAILSTORM 50 - RACKLESS LUGGAGE – BUILT FOR NARROW BIKES   At the heart of the system is the Structural Center Piece, which sits on the rear of the motorcycle between the two bags. This rigid structural element distributes the load evenly, stabilises the entire system and allows the width of the Hailstorm 35 to be adjusted. Thanks to this adjustable design, the system can be adapted to different seat widths and rear layouts, ensuring compatibility with a wide range of motorcycles. The Structural Center Piece can also be used in combination with the Anchor Point for Hailstorm for rear mounting without straps (nchor oint not included)   The Hailstorm 35 is equipped with the CRR Breakaway System, which is designed to reduce the risk of damage and injury in the event of a crash or if the luggage gets caught on an obstacle. The CRR break piece is integrated into the system and can be replaced if necessary   Each bag features three patented Enduristan Standard Interfaces, allowing modular expansion with additional accessories. The interfaces are positioned on the flap (1×3), on the front (2×2) and on the rear (2×4), making it easy to attach add-on bags exactly where they are needed.   Under the left flap, a drawstring system allows small items to be secured quickly. Under the right flap, a zipper pocket provides protected storage for documents or smaller gear.   The Hailstorm 35 comes with perfectly fitting inner bags that match the shape of the outer bags exactly. This allows you to remove all your gear in one go without taking the off the motorcycle – ideal when staying in a hotel or setting up camp. The inner bags feature a carrying handle and attachment points for an optional shoulder strap (not included).   To protect the motorcyclerotective stickers are included to prevent scratcheswherecomes into contact with the bike. Depending on the motorcycle and exhaust position, we recommend fitting an additional heat shield (not included).   Like all Enduristan products, the Hailstorm 35 is fully water-, dust-, mud- and snowproof – no inner bag required – and designed specifically for use on motorcycles.   Scope of Delivery 1 × Structural Center Piece (3 mm) 1 × Left bag (17.5L) 1 × Right bag (17.5L) 1 × Three-piece padding 2 × Lower straps 2 × Spare CRR break piece 2 × Inner bags for Hailstorm 35 2 × Protective stickers 8 × Ultra flathead screws M6 × 10 (thread-locked, stainless steel) 8 × Drive-in nuts M6 × 6 (zinc-plated) 10 × Strap attachers 2 × Camlock rear attachments   Features Rackless luggage system with 35 liters total capacity Adjustable width for narrow and wide bikes Structural Center Piece with cutouts for refueling and ROKstrap attachment (not included) Compatible with Anchor Point for Hailstorm for strap-free rear mounting (not included) CRR Breakaway System for increased safety Three patented Enduristan Standard Interfaces per bag Drawstring system under the left flap Zipper pocket under the right flap Inner bags included, with carrying handle and attachment points for optional shoulder strap Protective stickers included to prevent scratches on the motorcycle Fully water-, dust-, mud- and snowproof – no inner bag required   Technical Specifications Volume       35 liters Weight       3.6 kg Width       45 cm Height       42 cm Depth       21 cm

HAILSTORM 50 - RACKLESS LUGGAGE – BUILT FOR BIG ADVENTURE BIKES   At the heart of the system is the Structural Center Piece, which sits on the rear of the motorcycle between the two bags. This rigid structural element distributes the load evenly across the motorcycle, stabilises the entire system and allowsthe angle of the Hailstorm 50 to be adjusted. , ensuring compatibility with a wide range of large travel .   In addition to the standard rear mounting, the Hailstorm 50 can also be installed by routing the system over the passenger grab handles. However, for the cleanest fit and maximum stability, we recommend removing the grab handles so the system can sit directly and securely on the motorcycle.   The Hailstorm 50 is equipped with the CRR Breakaway System, which is designed to reduce the risk of damage and injury in the event of a crash or if the luggage gets caught on an obstacle. The CRR break piece is integrated into the system and can be replaced if necessary.   Each bag features three patented Enduristan Standard Interfaces, allowing modular expansion with additional accessories. The interfaces are positioned on the flap (1×3), on the front (2×2) and on the rear (2×4), making it easy to attach add-on bags or accessories exactly where they are needed.   Under the left flap, a drawstring system allows small items to be secured quickly. Under the right flap, a zipper pocket provides protected storage for documents or smaller gear.   The Hailstorm 50 comes with perfectly fitting inner bags that match the shape of the outer bags exactly. This allows all gear to be removed in one go without taking the outer bags off the motorcycle – ideal for hotels or camping. The inner bags feature a carrying handle and attachment points for an optional shoulder strap (not included).   To protect the motorcycle the complete lower surface of the luggage system is fitted with removable EVA padding. Protective stickers are included to prevent scratches where the CRR System comes into contact with the bike. Depending on the motorcycle and exhaust position, we recommend fitting an additional Inferno heat shield (not included).   Like all Enduristan products, the Hailstorm 50 is fully water-, dust-, mud- and snowproof – no inner bag required – and designed specifically for use on motorcycles.   Scope of Delivery 1 × Structural Center Piece (3 mm) 1 × Left bag (25L) 1 × Right bag (25L) 1 × Three-piece padding 2 × Lower straps 2 × Spare CRR break piece 2 × Inner bags for Hailstorm 50 2 × Protective stickers 8 × Ultra flathead screws M6 × 10 (thread-locked, stainless steel) 8 × Drive-in nuts M6 × 6 (zinc-plated) 10 × Strap attachers 2 × Camlock rear attachments   Features Rackless luggage system with 50 liters total capacity Adjustable width for narrow and wide bikes Structural Center Piece with cutouts for refueling and ROKstrap attachment (not included) Compatible with Anchor Point for Hailstorm for strap-free rear mounting (not included) CRR Breakaway System for increased safety Three patented Enduristan Standard Interfaces per bag (flap 1×3, front 2×2, rear 2×4) Drawstring system under the left flap Zipper pocket under the right flap Inner bags included, with carrying handle and attachment points for optional shoulder strap Protective stickers included to prevent scratches on the motorcycle Fully water-, dust-, mud- and snowproof – no inner bag required   Technical Specifications Volume       50 liters Weight       4.2 kg Width       50 cm Height       40 cm Depth       24 cm

ENDURISTAN HEAT SHILED INFERNO - PROTECTS YOUR LUGGAGE  KEEP YOUR LUGGAGE COOL The Inferno Heat Shield keeps your panniers and side panels away from the infernal heat of your muffler. One ore more properly installed Inferno Heat Shields can reliably avoid any meltdown. Exhaust systems can get as hot as 650°C - neither your soft luggage nor its content is able to sustain such temperatures. However, only a small distance between the muffler and the luggage is enough to let the heat dissipate. Additionally, the forced convection of the airflow will further improve the cooling capacity. FEATURES · Anodised, high grade aluminum · Stainless steel hose clamp · Fits mufflers with diameters up to 140mm   SPECIFICATIONS · Length: 16cm · Width: 7.5cm · Weight: 120g · Distance Clearing: 2.2cm

FOR ALL BIGGER TAILS   The Tail Pack - Large is the bigger brother of our well-known Tail Pack. It’s perfect for mounting to larger racks, fenders & pillion seats so you can carry even more stuff with you on your ride. You can mount it easily with the attached hooks or remove the hooks and strap it directly to your luggage rack.   The Tail Pack – Large fits the tail of almost any adventure or dirt bike, either directly on the tail or on a luggage rack, however, It's been specifically designed to fit perfectly on the larger luggage racks that you find on the bigger adventure bikes.   Of course, as with all our products the Tail Pack - Large is waterproof keeping your things 100% protected from rain, dust and sand.   Features: Water, mud, snow and dustproof Red inner liner for high visibility 1 fold-away separator in the main compartment Outside heavy-duty mesh pocket with velcro lock Elastic netting storage Cargo loops to attach additional gear Large reflecting logo on backside for maximum visibility 1 zipper pocket under cover Mesh pockets under cover with velcro lock 22 elastic holding loops for small items   Technical Specifications Volume       9 litres Weight       1.22 kg Length              32 cm Width              28 cm Height              15 cm

ENDURISTAN LIGHT SHOULDER STRAP   TAKE YOUR TANK BAG ANYWHERE The Light Shoulder Strap can be easily attached to our tank bags of Generation 5. This way, you can take your tank bag with you if you want to leave your motorcycle behind to explore the area. You can comfortably carry the tank bag over your shoulder like a messenger bag or loosely around your waist.   QUICK TO ATTACH AND PERFECTLY ADJUSTABLE With the super stable G-Hooks, you can quickly attach the Light Shoulder Strap to your tank bag, saving you time. The G-Hooks have a closure that prevents the Light Shoulder Strap from accidentally coming loose. The length can also be adjusted between 50 and 145 cm, ensuring the Light Shoulder Strap fits everyone perfectly.   TAKES UP LITTLE SPACE The compact design allows you to store the Light Shoulder Strap in even the smallest pockets or simply keep it in your tank bag. It takes up almost no space and is extremely lightweight.   HIGH-QUALITY MATERIALS Our commitment to quality is evident in the carefully chosen materials that make each product a durable and reliable companion:   G-Hooks with safety clip Super light mesh in Black   With these high-quality materials, we set standards for excellence and functionality, ensuring that your product stands up to the most demanding conditions while remaining stylish and reliable.   FEATURES Quick to attach Tank Bag can be carried over the shoulder or around the waist G-Hooks with safety clips Very lightweight thanks to light mesh No Sweating Thanks to Mesh Shoulder Pad   Compatible e.g. with: Blizzard Inner Bags Sandstorm Tank Bags     TECHNICAL SPECIFICATIONS Weight       0.06 kg / 2.11 oz Wide              8 cm Length              50-145 cm

ENDURISTAN MAP POCKET 07 LUTA-507-07   KEEP YOUR ESSENTIALS IN SIGHT   The Map Pocket 07, a must-have accessory for tank bags. Designed to keep your maps, important notes, toll tickets, or even your smartphone right on top of your tank bag, this practical pocket ensures you have everything you need within easy reach.   ALWAYS IN SIGHT The Map Pocket 07 makes it easy to keep essential items visible and accessible. The "07" in the name represents the 7-inch diagonal size of the viewing window, providing ample space for your essentials.   WATERPROOF ZIPPER The Map Pocket is designed with a state-of-the-art zipper that is IP55-rated, preventing water from entering and ensuring high water resistance.   NEXT-GENERATION VELCRO The Map Pocket attaches to your tank bag using cutting-edge Velcro technology. This Velcro is designed not to rub so if you carry the Map Pocket in your backpack or with your clothes, they won't get damaged.   SMARTPHONE COMPATIBLE The transparent part of the Map Pocket is made from a material that allows you to operate your phone or tablet even while it's inside the pocket. Plus, with the convenient cable pass-through, you can charge your device without compromising the waterproof integrity.   HIGH-QUALITY MATERIALS Our commitment to quality is evident in the carefully chosen materials that make each product a durable and reliable companion:   Main Material: Hypalon 70D Hypalon Transparent Window Made of PVC (for best UV resistance) Cable Pass-Through at the Back Zipper positioned on the side with zipper seal and end stop for waterproofness without a zipper garage, IPX55 rating   FEATURES 7-inch viewing window (17.5 x 12.5 cm) IP55-rated waterproof zipper Next-Generation Velcro Smartphone Compatible Cable pass-through   TECHNICAL SPECIFICATIONS Weight       0.06 kg / 2.11 oz Wide              15.5 cm Length              23 cm Height              1.2 cm

ENDURISTAN MAP POCKET 10 - LUTA-507-10   KEEP YOUR ESSENTIALS IN SIGHT   The Map Pocket 10, a must-have accessory for tank bags. Designed to keep your maps, important notes, toll tickets, or even your smartphone right on top of your tank bag, this practical pocket ensures you have everything you need within easy reach.   ALWAYS IN SIGHT The Map Pocket 10 makes it easy to keep essential items visible and accessible. The "10" in the name represents the 10-inch diagonal size of the viewing window, providing ample space for your essentials.   WATERPROOF ZIPPER The Map Pocket is designed with a state-of-the-art zipper that is IP55-rated, preventing water from entering and ensuring high water resistance.   NEXT-GENERATION VELCRO The Map Pocket attaches to your tank bag using cutting-edge Velcro technology. This Velcro is designed not to rub so if you carry the Map Pocket in your backpack or with your clothes, they won't get damaged.   SMARTPHONE COMPATIBLE The transparent part of the Map Pocket is made from a material that allows you to operate your phone or tablet even while it's inside the pocket. Plus, with the convenient cable pass-through, you can charge your device without compromising the waterproof integrity.   HIGH-QUALITY MATERIALS Our commitment to quality is evident in the carefully chosen materials that make each product a durable and reliable companion:   Main Material: Hypalon 70D Hypalon Transparent Window Made of PVC (for best UV resistance) Cable Pass-Through at the Back Zipper positioned on the side with zipper seal and end stop for waterproofness without a zipper garage, IPX55 rating   FEATURES 10-inch viewing window  (24.0 x 16.5 cm) IP55-rated waterproof zipper Next-Generation Velcro Smartphone Compatible Cable pass-through   TECHNICAL SPECIFICATIONS Weight       0.09 kg / 3.17 oz Wide              20.5 cm Length              26.5 cm Height              1.2 cm

Enduristan Monsoon 3 saddlebags for mounting without pannier rack   DISCOVER THE WORLD   The Monsoon 3 can be mounted on many motorbikes without a pannier rack. This centres the weight and keeps the bike nice and slim - both are a big plus over pannier systems in off-road use. For motorbikes with pannier racks, we offer a mounting kit with two additional ROK straps.   NO FLOOD TOO DEEP   With a fully welded design, waterproof 3-layer fabric and roll-top closure, the Monsoon 3 bags are 100% waterproof, mudproof, snowproof and dustproof. Even after a fall or tip-over, the roll-top closure helps you close the bags cleanly - without fuss or bother. Simply place the two plastic strips on top of each other and roll.   IMPACT PROTECTION   At the front, underneath and at the rear we have added a high impact plastic to protect the contents of your bags from loose gravel and surprise branches.     Features:   2 fold-away separators per bag: Fold them in to divide your bag, fold them away to have one large compartment Holds up to 6 isolation bags (separately available) Red inner lining for high visibility 2 rows of cargo loops per bag to attach additional gear Ergonomic soft grip handles Deluxe shoulder strap separately available 3 compression straps per bag Firm seat under even the most extreme off road riding Bags can move away in case you drop your bike thanks to the use of ROKstrap components Easy fastening, quick removal Distance between bags adjustable between 21 and 75cm Fore-aft placement fully adjustable No flapping straps Washable and easy to clean Built to last   Technical data:   Volume: 30 litres per bag, 60 litres per pair. Dimensions: 36 x 20 x 24 cm (per bag) Weight (per pair): 3.95 kg     Mounting without pannier rack   The Monsoon 3 saddlebags fit many motorbikes without a pannier rack, keeping the bike narrow and the weight close to the centre. Always keep a safe distance from hot parts of the exhaust system and make sure to keep the Monsoon 3 well out of hot exhaust gases. We recommend the use of one or more of the Inferno heat shields.

Enduristan Monsoon 3 saddlebags for mounting with a pannier rack   DISCOVER THE WORLD   The Monsoon 3 can be mounted on many motorbikes without a pannier rack. This centres the weight and keeps the bike nice and slim - both are a big plus over pannier systems in off-road use. For motorbikes with pannier racks, we offer a mounting kit with two additional ROK straps.   NO FLOOD TOO DEEP   With a fully welded design, waterproof 3-layer fabric and roll-top closure, the Monsoon 3 bags are 100% waterproof, mudproof, snowproof and dustproof. Even after a fall or tip-over, the roll-top closure helps you close the bags cleanly - without fuss or bother. Simply place the two plastic strips on top of each other and roll.   IMPACT PROTECTION   At the front, underneath and at the rear we have added a high impact plastic to protect the contents of your bags from loose gravel and surprise branches.     Features:   2 fold-away separators per bag: Fold them in to divide your bag, fold them away to have one large compartment Frame mount kit for secure mounting to pannier racks Holds up to 6 isolation bags (separately available) Red inner lining for high visibility 2 rows of cargo loops per bag to attach additional gear Ergonomic soft grip handles Deluxe shoulder strap separately available 3 compression straps per bag Firm seat under even the most extreme off road riding Bags can move away in case you drop your bike thanks to the use of ROKstrap components Easy fastening, quick removal Distance between bags adjustable between 21 and 75cm Fore-aft placement fully adjustable No flapping straps Washable and easy to clean Built to last   Technical data:   Volume: 30 litres per bag, 60 litres per pair. Dimensions: 36 x 20 x 24 cm (per bag) Weight (per pair): 3.95 kg     Mounting with pannier rack   If you use pannier frames for a secure mount we offer a kit, containing two additional ROKstraps designed to make our panniers fit your luggage frames securely. This kit is already included in this set. But can be purchased as an additional set or spare as well.

You have locked your Monsoon Evo on your pannier rack or you just don't want to take all your bags with you to the hotel or tent every evening? Sometimes the bags are just too dirty for that after a day of driving. For this reason Enduristan developed the inner bag for the Monsoon Evo. It is made of an incredibly robust single-layer material, which has already proven itself in our isolation bags. Because the zipper runs around the entire bag, packing the bag is child's play and extremely convenient.   The water-repellent zipper in combination with the welded construction allow you to take the inner pocket out of your Monsoon Evo even when it rains or to lay it on the wet floor without all your belongings getting wet. And so that you can simply pull the inner pockets out of the Monsoon Evo and carry them comfortably, they have a comfortable handle. If the inside pocket gets dirty, you can easily clean it with water. The water-repellent zippers in combination with the welded construction allow you to take the Inner Bags out of your Blizzards even in the rain or put them on the wet floor without getting all your belongings wet. They come with a comfortable handle, so you can easily pull them out of your Blizzards. If the Inner Bags get dirty, you can easily clean them with water.   FEATURES   Handle for easy removal and transport of the bag All-round zipper Easy to clean Perfect fit Very light and durable Price per piece   SPECIFICATION   Size S   Volume     24 Liter Width        40 cm Height       40 cm Deepth     16 cm Weight      0.196 kg   Size L Volume     34 Liter Width        40 cm Height       40 cm Deepth     21 cm Weight      0.216 kg

Frame Mount Kit to install Monsoon 3 Panniers on a flat set of pannier frames. Containing two additional ROKstraps designed to make these panniers fit your luggage frames / pannier racks securely.   Material: natural rubber / polyester mesh Colour: black Dimensions approx. 35 x 3 cm ( L x W) Instruction   Please note: This kit is already included with the Monsoon 3 panniers for pannier racks.

Quick access to important things   Working with the riders on the Enduristan Race Team has led to the development of a small bag that directly attaches to the rear of the bike. This design has become a crucial piece of equipment that is capable of carrying the very basic things needed during a rally, enduro race or event such as the Hardalpitour. The Enduristan Rally Pack is optimized for fast access and best overview and will quickly become your best friend when racing against the clock.   Features:   100% waterproof (without extra cover) welded-seam waterproof fabric Red inner coating for best contrast External mesh pocket Quick access thanks to zipper Stable and waterproof fastening (stainless steel screws) Large internal zipped pocket Additional internal mesh pocket 8 elastic material loops for the most important tools Washable and easy to clean Built to last     Technical specifications   Volume 3.5 litres Width 17 cm  (8.3") Height 10 cm  (6.7") Depth 21 cm  (3.9") Weight 0.25 kg

ENDURISTAN MONSOON EVO - 100% WATER, DUST, MUD AND SNOW PROOF  GO LIGHT - EVEN WITH PANNIER FRAMES The Monsoon Evo was developed to travel as light as possible, even with a lot of luggage. With 2.55 kg (size S) and 2.75 kg (size L) and no need for a heavy mounting plate, the Monsoon Evo is the lightest frame mount pannier solution in the high-quality segment. And yet, with 24 and 34 liters capacity, they offer enough storage space even for the longest adventure travels. And if this space is still not sufficient, you can even add two Fender Bags or four Can/ Bottle Holsters on the outside. The Monsoon Evo fits almost all pannier frames with 18 mm tubes. Due to a newly developed and innovative mounting bracket, the bags can be attached to the pannier frames without an additional mounting plate. If you also mount a lock, the Monsoon Evo are also protected against theft. Like all our products, the Monsoon Evo is designed for the toughest journeys. The mounting brackets are made of fiber-reinforced composite material, which has similar mechanical properties to aluminum. We also use our proven 3-layer fabric, which is extremely abrasion-resistant and has proven itself in the past. And should your bike tip over anyway, an additional edge protection keeps the bag safe. FEATURES · No additional mounting plate required · Fully water, dust, mud and snow proof · No inner bag required · Red inner lining for high visibility · Fits 18mm diameter racks · Extremely strong mounting brackets with safety pins · Easy fastening, quick removal · Can be used on the right and left side of the motorcycle · Edge protection · 4 compression straps · 4 interfaces to attach Bottle/Can Holsters · 2 interfaces to attach Fender Bags S or L · 2 rows of cargo loops to attach additional gear · Deluxe shoulder strap separately available · Ergonomic soft-grip handles · Lockable to the frame with a padlock (for example ABUS 85/30HB65, not included) · Lockable with security strap (see accessories) · Price for 1 bag   TECHNICAL DETAILS MONSOON EVO - SMALL · Volume: 24 Liters · Width: 40 cm · Height: 40 cm · Depth: 16 cm · Weight: 2.55 kg TECHNICAL DETAILS MONSOON EVO - LARGE · Volume: 34 Liters · Width: 40 cm · Height: 40 cm · Depth: 21 cm · Weight: 2.75 kg FITMENT   Please see our fitment guide in the images to check the compatibility with your bike's luggage frames.