Enduristan Hailstorm 50 Saddle Bags

€670.00

Ready to ship as of 12 June 2026

pair

Part number: ED-LUSA-011-50

Enduristan Hailstorm 50 Saddle Bags

HAILSTORM 50 - RACKLESS LUGGAGE – BUILT FOR BIG ADVENTURE BIKES

At the heart of the system is the Structural Center Piece, which sits on the rear of the motorcycle between the two bags. This rigid structural element distributes the load evenly across the motorcycle, stabilises the entire system and allowsthe angle of the Hailstorm 50 to be adjusted. , ensuring compatibility with a wide range of large travel .

In addition to the standard rear mounting, the Hailstorm 50 can also be installed by routing the system over the passenger grab handles. However, for the cleanest fit and maximum stability, we recommend removing the grab handles so the system can sit directly and securely on the motorcycle.

The Hailstorm 50 is equipped with the CRR Breakaway System, which is designed to reduce the risk of damage and injury in the event of a crash or if the luggage gets caught on an obstacle. The CRR break piece is integrated into the system and can be replaced if necessary.

Each bag features three patented Enduristan Standard Interfaces, allowing modular expansion with additional accessories. The interfaces are positioned on the flap (1×3), on the front (2×2) and on the rear (2×4), making it easy to attach add-on bags or accessories exactly where they are needed.

Under the left flap, a drawstring system allows small items to be secured quickly. Under the right flap, a zipper pocket provides protected storage for documents or smaller gear.

The Hailstorm 50 comes with perfectly fitting inner bags that match the shape of the outer bags exactly. This allows all gear to be removed in one go without taking the outer bags off the motorcycle – ideal for hotels or camping. The inner bags feature a carrying handle and attachment points for an optional shoulder strap (not included).

To protect the motorcycle the complete lower surface of the luggage system is fitted with removable EVA padding. Protective stickers are included to prevent scratches where the CRR System comes into contact with the bike. Depending on the motorcycle and exhaust position, we recommend fitting an additional Inferno heat shield (not included).

Like all Enduristan products, the Hailstorm 50 is fully water-, dust-, mud- and snowproof – no inner bag required – and designed specifically for use on motorcycles.

Scope of Delivery

1 × Structural Center Piece (3 mm)
1 × Left bag (25L)
1 × Right bag (25L)
1 × Three-piece padding
2 × Lower straps
2 × Spare CRR break piece
2 × Inner bags for Hailstorm 50
2 × Protective stickers
8 × Ultra flathead screws M6 × 10 (thread-locked, stainless steel)
8 × Drive-in nuts M6 × 6 (zinc-plated)
10 × Strap attachers
2 × Camlock rear attachments

Features

Rackless luggage system with 50 liters total capacity
Adjustable width for narrow and wide bikes
Structural Center Piece with cutouts for refueling and ROKstrap attachment (not included)
Compatible with Anchor Point for Hailstorm for strap-free rear mounting (not included)
CRR Breakaway System for increased safety
Three patented Enduristan Standard Interfaces per bag (flap 1×3, front 2×2, rear 2×4)
Drawstring system under the left flap
Zipper pocket under the right flap
Inner bags included, with carrying handle and attachment points for optional shoulder strap
Protective stickers included to prevent scratches on the motorcycle
Fully water-, dust-, mud- and snowproof – no inner bag required

Technical Specifications

Volume 50 liters
Weight 4.2 kg
Width 50 cm
Height 40 cm
Depth 24 cm

Manufacturer:
Enduristan GmbH
Kirchgasse 23
8472 Seuzach, Schweiz
ch@enduristan.com

Accessories

Enduristan Ancor Point for Hailstorm

Ready to ship as of 19 June 2026

EFFORTLESS MOUNTING – CLEAN SETUP The Anchor Point for Hailstorm is designed to make mounting and removing the Hailstorm luggage systems as simple and clean as possible. It replaces the rear strap mounting with a fixed anchor solution, allowing the Hailstorm to be mounted at the rear of the motorcycle without straps or on bikes where no straps can be attached on the rear, while the front attachment is still secured using the Hailstorm straps as usual. The system consists of two parts: a mounting plate that is fixed to the Hailstorm bag, and the Anchor Point itself, which is bolted to the rear of the motorcycle fender plastic or to a luggage rack / rear plate. All screws and nuts required for installation are included. Once installed, the Hailstorm can be mounted and removed at the rear in seconds – securely, reliably and with a clean setup on the bike. Thanks to its minimalist and compact design, the Anchor Point remains discreet on the motorcycle and does not interfere with riding or other luggage setups when the bag is not mounted. It provides a practical solution for riders who want quick rear mounting with a tidy appearance on the motorcycle. Scope of Delivery 1 × Anchor Point metal sheet 1 × Attachment point M6 4 × Ultra flathead screws M6 × 12 1 × Bolt M6 × 25 1 × Bolt M6 × 30 1 × Washer 6.4 × 20 × 1.5 mm 5 × Self-locking nuts M6 Features Replaces rear strap mounting with a fixed anchor solution Enables quick mounting and removal at the rear Front attachment remains secured with Hailstorm straps Mounts to the rear of the motorcycle or a luggage rack / rear plate Clean and minimalist design Compact size – does not interfere when not in use Secure and reliable attachment Technical Specifications Weight 0.03 kg

€35.00