Diagnostic Port Splitter EURO5

ABS Off-Road Dongle Yamaha Tenere 700 EURO5 colour TFT display   Product Details Plug-and-play Dongle that adds the memory for ABS settings and enables full control over ABS and rear ABS by stock "ABS" button. Everything is done by "clean way" trough data communication with ABS unit. Without cutting any wires, without any errors. Like it is there from factory.   How it works The Dongle modifies the ABS settings behavior to what you would expect it to have directly from the manufacturer. It is expanding the functionality of the ABS button and adding the ABS memory.   It is expanding the functionality of the ABS button. It is adding the ABS settings memory.   The new behavior will be as follows: A short push of stock "ABS" button will toggle between the rear ABS OFF and ABS ON. A long hold (approx. 1 second) of stock "ABS" button will turn ABS completely OFF (front and rear ABS). ABS settings are retained in memory even after turning the motorcycle OFF and ON. Note: The changes of ABS settings still can be done only when the bike is not moving - this is unfortunately hard-coded in ECU.   Why do you need it It completely eliminates the time-consuming setting of ABS when driving in off-road or anywhere else. It allows you to return to the riding basics also with the modern bike. Just sit and enjoy the ride.   Installation Plug-and-play installation. Simply connect the Dongle between Bluetooth dongle and diagnostic post plug.them.   Please note: If you wish to use the Dongle in combination with another CAN Bus device, a diagnostic port splitter is needed in addition. See accessories.   Compatibility Working on Yamaha Tenere 700 - only on models with color TFT displays. Older models requires a different Dongle that you also find in the webshop.   Fits for all Tenere 700 with colour TFT display, like e.g.:   Yamaha Tenere 700 2023 onwards (EU models) Yamaha Tenere 700 2024 onwards (EU + US models) Yamaha Tenere 700 Rally Edition 2023 onwards (EU + US models) Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards Yamaha Tenere 700 World Raid 2022 onwards (EU + US models) Yamaha Tenere 700 World Rally 2023 onwards (EU + US models)     FAQs:   Is the dongle waterproof? Yes, it is over-molded by injection molding with TPU plastics. It is not only a plastic box but all inside is tightly filled with plastics. It is protecting it from water and humidity and also strengthens the entire structure against hard impacts and hardest shocks.   Can the Dongle damage anything on the bike in case of failure? In case of Dongle failure the bike will enter safe mode but nothing will be damaged. After disconnecting the malfunctioning Dongle everything will return to normal. The eventual error symbol on dashboard will disappear after few short rides. Both CAN bus itself and the devices connected to this bus are immune to failures of other connected devices so the Dongle failure will not damage them. Power is drawn from the tail light connector or from the diagnostic plug - the Dongle failure only blow the fuse. However, this device interferes with other onboard electronic systems even if the ABS is set to ON (disabled state of the Dongle). In case of its failure ABS and some info on the dashboard may be temporarily unavailable. By installing this device, you assume all responsibility for possible damage to health and property caused by the incorrect function of this device and the subsequent malfunction of other electronic systems of the motorcycle. Device is designed for riding in hard Off-Road where the ABS system is unwanted and possibly dangerous.   Can the Dongle affect the warranty of the bike? The Dongle communicates trough the CAN bus data connection with the dashboard and ECU and it is designed to automotive standards. The ECU and the Dashboard is unaware of whether the message containing the required settings is transmitted by the Dongle instead of the dashboard or ECU. The messages are identical to those sent by display panel. Therefore, if you disconnect the Dongle prior to making motorcycle warranty claim, there will be no indication that this device was ever connected. However, installation of the Dongle is your responsibility. Do not take this as a guide on how to circumvent the motorcycle's warranty conditions. It's just a description of how the Dongle interacts with the bike. It is still a piece of equipment that is not approved by Yamaha as an original accessory and you are responsible for any problems caused by its installation and use.

ABS Off-Road Dongle Yamaha Tenere 700 2021-2022 & 2023 US-models - EURO5 (monochromatic dashboard, red 6-pin diagnostic plug)   Product Details Plug-and-play Dongle that adds the memory for ABS settings and eneables full control over ABS by stock "ABS" button.   How it works The Dongle modifies the ABS settings behavior to what you would expect it to have directly from the manufacturer.   It is expanding the functionality of the ABS button. It is adding the possibility to control Rear ABS separately. It is adding the ABS settings memory.   The new behavior will be as shown in the chart in the photos.   A short push of stock "ABS" button will toggle between the rear ABS OFF and ABS ON. A long hold of stock "ABS" button will turn ABS completely OFF (front and rear ABS) - as on default bike. ABS settings are retained in memory even after turning the motorcycle OFF and ON.   Note: The changes of Rear ABS settings can be done even if the bike is moving! Changes of whole (Front + Rear) ABS system can be done only when the bike is NOT moving - this is unfortunately hard-coded in ECU.   Why do you need it It completely eliminates the time-consuming setting of ABS when driving in off-road or anywhere else. It allows you to return to the riding basics also with the modern bike. Just sit and enjoy the ride.   Installation Plug-and-play installation. Simply disconnect two connectors near the battery and connect the Dongle between them.   Please note:  If you like to use another device on the diagnostic port, please order the EURO5 diagnostic port splitter in addition. See accessories.   Compatibility Working on Yamaha Tenere 700 - only on models Euro 2021-2022 & 2023 US model - EURO5 (monochromatic dashboard, red 6-pin diagnostic plug)TFT displays. Other models requires a different Dongle - see webshop.   Fits for all Tenere 700 2021-2022 EURO5 + US models 2023 (Monochromatic LCD dashboard, red 6-pin diagnostic plug) display, like e.g.:   Yamaha Tenere 700 2021-2022 EURO5 (Monochromatic dashboard, red 6-pin diagnostic plug) Yamaha Tenere 700 2023 (US model only) EURO5 (Monochromatic dashboard, red 6-pin diagnostic plug) Yamaha Tenere 700 Rally Edition 2021-2022 EURO5 (Monochromatic dashboard, red 6-pin diagnostic plug) Yamaha Tenere 700 Rally Edition 2023 US model only EURO5 (Monochromatic dashboard, red 6-pin diagnostic plug)     FAQs:   Is the dongle waterproof? Yes, it is over-molded by injection molding with TPU plastics. It is not only a plastic box but all inside is tightly filled by plastics. It is protecting it from water and humidity and also strengthens the entire structure against hard impacts and hardest shocks.   Can the Dongle damage anything on the bike in case of failure? In case of Dongle failure the bike will enter safe mode but nothing will be damaged. After disconnecting the malfunctioning Dongle everything will return to normal. The eventual error symbol on dashboard will disappear after few short rides. Both CAN bus itself and the devices connected to this bus are immune to failures of other connected devices so the Dongle failure will not damage them. Power is drawn from the tail light connector or from the diagnostic plug - the Dongle failure only blow the fuse. However, this device interferes with other onboard electronic systems even if the ABS is set to ON (disabled state of the Dongle). In case of its failure ABS and some info on the dashboard may be temporarily unavailable. By installing this device, you assume all responsibility for possible damage to health and property caused by the incorrect function of this device and the subsequent malfunction of other electronic systems of the motorcycle. Device is designed for riding in hard Off-Road where the ABS system is unwanted and possibly dangerous.   Can the Dongle affect the warranty of the bike? The Dongle communicates trough the CAN bus data connection with the dashboard and ECU and it is designed to automotive standards. The ECU and the Dashboard is unaware of whether the message containing the required settings is transmitted by the Dongle instead of the dashboard or ECU. The messages are identical to those sent by display panel. Therefore, if you disconnect the Dongle prior to making motorcycle warranty claim, there will be no indication that this device was ever connected. However, installation of the Dongle is your responsibility. Do not take this as a guide on how to circumvent the motorcycle's warranty conditions. It's just a description of how the Dongle interacts with the bike. It is still a piece of equipment that is not approved by Yamaha as an original accessory and you are responsible for any problems caused by its installation and use.