Dynojet Autotune
€379.95
Ready to ship in approx. 5 days
Dynojet Autotune
Avaiable for the Power Commander V is the add-on Auto Tune module which allows for live, closed loop EFI tuning.
Based closely on Dynojet's new Wideband Commander 2 it features a OEM quality Bosch Wideband O2 sensor. The Auto tune module allows users set a demanded air/fuel ratio in the Power Commander V software and the Auto tune will make adjustments in real time. When enabled there is an AFR table with the same 250 RPM increment resolution as the fuel table. The Auto tune can be configured for minimum run time before live sample as well as maximum +/- fuel adjustments in relation to the base map. The Auto Tune kit can also use the Dynojet map switch or any open/closed switch which allows the user to switch between live tuning to the parameters set thru the PC V software or the base map in the PC V unit.
You can leave the map switch in "live" mode, or if you want to write the fuel map you can connect to the PC V software, retrieve the fuel trims and either write them to the map or clear them. We have also compared several Auto Tune derived maps to dyno tuned maps and the results were impressive. A very important requirement for building a good tune is to have a close base map to start out with, as the Auto Tune writes its fuel trims off the base PC V map. The Auto Tune module does require some basic wiring from the sensor harness into the modules.
The Auto Tune module is a very good choice for those with a unique mods, where a dyno is not available, or for those looking for the ability to tune in real time. The ultimate combination we recommend is combining a full dyno tune session with the Auto tune. We build the map for the best combination of performance and efficiency, and then implement the AFR's we developed into the Auto Tune AFR table. This strategy will provide the best performance under all conditions.
· Live fuel mixture setting while driving
· Basic setting already programmed
· to be used as a mobile setting module
· incl. OEM quality Bosch Wideband O2 sensor
· can be used only with the Power Commander V
· NOT FOR USE WITH 2-CYLINDER BIKES (e.g. XT1200Z)!!!!
Dynojet Research, Inc.
2500 N Buffalo Ste 140
89128 Las Vegas, Vereinigte Staaten von Amerika
support@dynojet.com
ZUBEHÖR
Ready to ship in approx. 5 days
Driving the XT660s without this anoying and maddening plopping and banging when closing throttle? Closing the AGR system with a blanket with help you ouit of this mess. Installing is easy - you do not have to remove the cylinder head for this! Works perfecly with aftermarket exhaust systems. Precisly made from laser cutted stainless steel, glas bead blasted. Including also stainless steel bolds. · no banging and popping in exhaust sound! · Works perfectly with aftermarket exhaust systems · perfect for tuned bikes. · Easy to install Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016 · Yamaha MT-03 2005-2008
Ready to ship in approx. 5 days
Power Commander 6 Injection module for the Yamaha XT-660R/X 2004 - 2006 The Power Commander 6 fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander 6 takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. Better than ever (and smaller than ever), Power Commander 6 now has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander 6 map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander 6 can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs. Power Commander 5 Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential 2 position map switching function built in (map switch not included) Pick up possibility for gearing an speed. Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as temperature) Fuel mixture can be changed from -100%/+250% 10 throttle positions are now avaiable Enhanced adjustment range of the accelerator pump.. Connetion possibility to the Dynojet Autotune - this allows adjument of the fuel mixture while driving. Fits all Yamaha XT660RX 2004-2006 without Oxygene sensor Scope of Delivery: Dynojet Power Commander 6 Mounting Material Mounting instructions Fits all Yamaha XT-660 2007 onwards with Lambda sensor: Yamaha XT-660R 2004-2006 Yamaha XT-660X 2004-2006 If you are interested in a custom made, perfectly fitting map for your bike, get in contact with us here in Cologne. You will not regret it!
Ready to ship in approx. 5 days
Power Commander 6 Injection module with O2 Optimizer for the Yamaha XT-660R/X 2007 - 2016 The Power Commander 6 fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander 6 takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. Better than ever (and smaller than ever), Power Commander 6 now has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander 6 map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander 6 can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs. Power Commander 6 Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential 2 position map switching function built in (map switch not included) Pick up possibility for gearing an speed. Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as temperature) Fuel mixture can be changed from -100%/+250% 10 throttle positions are now avaiable Enhanced adjustment range of the accelerator pump.. Connetion possibility to the Dynojet Autotune - this allows adjument of the fuel mixture while driving. Fits all XT660RX 2007 onwards with stock Oxygene sensor Scope of Delivery: Dynojet Power Commander 6 Dynojet O2 Optimizer Mounting Material Mounting instructions Fits all Yamaha XT-660 2007 onwards with Lambda sensor: Yamaha XT-660R 2007-2016 Yamaha XT-660X 2007-2016 If you are interested in a custom made, perfectly fitting map for your bike, get in contact with us here in Cologne. You will not regret it!