Hyperpro fork springs Lowering -35mm Yamaha Tenere 700 2019 - 2024

This fork spring kit is made to lower the front height of the Yamaha Tenere for about 35mm.

In combination with fitting lowering bones, the height of the Yamaha Tenere will also be good for smaller riders.
Seat height will go down for about 35-40mm, depending on the lowering kit.

The included progressive lowering fork springs can be used to lower the frontend of the motorcycle when it is not possible to lower the forks through the yokes (triple clamps).
Perfect for smaller riders. Also a security feature if your feeto do not touch the ground perfectly.
With these springs you get the bike lowered without having negative effects on the suspension.
Hyperpro advises to lower both front and rear of the motorcycle to be assured of the best result.
Rear can be lowered by lowering links or a custom made shock. See accessories.

HYPERPRO lowering fork springs distinguish themselves by their continuous increase of the spring rate (Link-System Curve) in the whole range. They have been especially developed and tested for the Tenere 700. The manufacturing process has been made perfect: First-class, high-alloyed chrome-silicon-steel is used exclusivley. It is nearly tolerance freely coiled on computer-operated machines. The manufacturing is carried out according to DIN 2095. At the end, the outside of the springs is polished in order to achieve a minimal friction value.
Of course, the forkspring sets are delivered with a ABE Certificate.

The fork springs are delivered with 2 liter fork oil!

Why progressive springs?

· Using a linear, "normal" standard spring, all turns of the spring get loaded with the same weight at the same time. Imagine a spring with 10 turns at intervals of 1 cm - if you push the spring down 1 cm it shortens 1 cm, thus, the intervals between the single turns shorten to 0.9 cm.
Using a two-step spring, half of the coils have a shorter interval. When the spring is compressed, the intervals shorten. At a certain point, the coils of the closer turns contact.

· The spring "blocs" and stiffens. Now, only the turns with a greater interval keep working. The suspension comfort and the vehicle response drop rapidly.

· Unfortunately, one needs more than 2 steps for driving because the powers occur progressively. That means, hardly any powers are needed to let the spring deflect. Though, the higher the power which affect the carriage, the more antagonising power of the spring. The result is a n essentially improved drivability, an improved braking action (because the front does not descend as much), an increased stability - and thus, an overall improved driving safety.

Scope of delivery:

· Fork Springs fpor lowering

· Mounting instructions

· 2 liters fitting fork oil

· Mounting and Set-up instructions

Fits all:

· Yamaha Tenere 700 2019 - 2024

· Yamaha Tenere 700 Rally Edition 2020 - 2024