Lowering kit 20 mm Yamaha Tenere 700 World Raid / Extreme TÜV

Rear shock lower linkage bearing and seal kit Yamaha Tenere 700 Often this bearing is mounted with not enough grease during the assembly at Yamaha - this causes a high weraring of this bearing. Check regulary! Contains a high quality needle bearing, a polished bushing and two oem quality seals. Fits all: Yamaha Yamaha Tenere 700 2025 onwards Yamaha Yamaha Tenere 700 Rally 2025 onwards Yamaha Yamaha Tenere 700 2019 - 2024 Yamaha Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards

Complete suspension link arm (pivot) bearing repair kit including bearing pins for Yamaha Tenere 700. Comes with all needed parts to exchange the complete link arm bearings and seals. The set contains 4 bearings and seals for the swing arm linkage, 2 bearing and seals for the bottom of swingarm and 1 bearing and 2 seals for the shock linkage. Also included are the hardened shafts for the swing arm linkage, the bottom of the swingarm and the shock.   The set contains: 7 x high quality needle roller bearings (4 x linkage, 2 x lower side swingarm, 1 x lower shock linkage) 8 x oil seals (NBR quality) 4 x grounded and hardened shafts   Fits all: Yamaha Yamaha Tenere 700 2025 onwards Yamaha Yamaha Tenere 700 Rally 2025 onwards Yamaha Yamaha Tenere 700 2019 - 2024 Yamaha Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards

Complete suspension link arm (pivot) bearing repair kit for Yamaha Tenere 700 model range. Comes with all needed parts to exchange the complete link arm bearings and seals. Contains 4 bearings and 4 seals for the swing arm linkage and 2 bearing and 2 seals for the bottom of swingarm. Lower rear shock linkage bearing / seal kit not included. See accessories.   The set contains: 6 x high quality needle roller bearings 6 x oil seals (NBR quality)   Fits for all: Yamaha Yamaha Tenere 700 2025 onwards Yamaha Yamaha Tenere 700 Rally 2025 onwards Yamaha Yamaha Tenere 700 2019 - 2024 Yamaha Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards

Tractive Suspension X-TREME PRO PDS II shock Yamaha Tenere 700 World Raid and Extreme, black - for extreme hard off-road and Rally use.   Pol Tarres uses exactly this shock in his World Raid Tenere 700 build!   The new X-TREME PRO shock is a further improvement for riders who mainly ride hard off-road or compete in rally’s and require more damping and bottoming resistance.   The X-TREME PRO shock has an improved bumpstop, black protector sleeve made from POM instead of rubber, replaced O-ring from bearing seal to greased off-road seal to keep dirt away, a new damping setup, modified High- and Low Speed compression setting,  including a revised PDS Shim stack for more bottoming safety, modified the shimstack on the main piston (MX set-up).   Tracive Suspension uses the revolutionary PDS(II) system (Position-Dependent-Damping System) for these shocks. This is a hydraulic breakdown protection system. The heart of the system is a second damper piston, which effectively prevents breakthrough at the end of the suspension travel in the event of very strong compression, even with a high payload and/or passenger - the damping always works in relation to the travel. Especially during hard off-road use (jumping), during rallies or on extreme tours with high load, the PDS system is a very good feature to ensure the perfect function of the shock absorber even in critical situations. It effectivily is a cushion that absorbs the high ingoing energy and prevents a hard bottoming of the shock absorber. This leads to increased comfort and safety. At the same time the bottoming impacts on the motorbike frame are minimised, leading to less bent bolts and damages.   Tractive Suspension utilizes only the best materials, top suppliers and highest available technologies in all of the Suspension Products. All basic components are manufactured from the highest quality aluminum alloys or stainless steel. The piston rods are made from CrMo alloy to achieve the best possible strength and ductility at the lowest possible weight. Springs are wound from the most superior material available on the market featuring lightest weight at longest life. Tractive shocks are based on 4616 system, meaning a piston diameter of 46 mm and a piston rod of 16 mm. Dimensions that guarantee a perfect balance between performance, endurance and adjustability. Low-friction seal with integrated Teflon back-up ring maximizes performance and extends the life of the shock. Extra steel inserts in the machined aluminum shock fork for perfect guidance and increased durability, even in harshest conditions.   Each shock absorber is dyno-tested for accurate performance before despatch at the Tractive Suspension factory.   Features: Wheel travel like oem Seat height like OEM Ground clearance like OEM Black anodised housing and adjuster 4 different spring rates avaiable to make the shock fit your needs 46 mm high flow pistons Cold forged and machined 6082 T6 46 mm aluminum shock body for high-strength and maximum heat dissipation Stainless steel bushes instead of alu: more durable especially for heavy bikes. Oversized 16 mm high-strength shaft made of chrome-moly steel for maximum strength and durability. Low-friction seal with integratet Teflon back-up Adjustable rebound damping Adjustable compression damping (high + low speed) Free spring preload adjustment Dampening set up for fully-loaded bike right out-of-the-box, developed by and for demanding touring and adventure riders Our recommendation for Adventure and extreme trail riding use with the Tenere 700, when no hydr. preload adjustment needed Fully serviceable Steel inserts in the machined aluminum shock fork for perfect guidance and increased durability Tractive part number: 46YA22-T5121-TRBK 5 years warranty   Fits all: Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2022 - 2024   Spring rate guidelines:   Please choose the weight including helmet, jacket, boots etc. If you like, you can email the questionnaire for the suspension setup (see documents tab) after ordering. We will then check the ordered suspension for you.   80 N/mm  -  Riders weight up to 80 kg and light luggage 85 N/mm  -  Riders weight 80-100 kg, including passenger and light luggage 15 kg 90 N/mm  -  Riders weight 100-120 kg including passenger and light luggage 15 kg 95 N/mm  -  Riders weight 120+ kg and more including passenger and luggage