Mirror DoubleTake Adventure 2.0 Mirror Set 6" (150 mm), for left and right side, M10 thread

Doubletake Adventure Reflector replacement glass for Doubletake adventure mirror   Replacement glass reflector for Adventure Mirror Reflector Dimensions: 5.25" x 3.5" (135mm x 90mm) Convex lens meets SAE and CE specifications Held in place with clear silicone.

Security nut Kit for Doubletake mirrors   Includes two nuts and bolts that replaces the big thumbscrews on your Doubletake 3.5 or 6.0 ARMS Includes wrench Kit does not include Doubletake Arms

Doubletake Base Kit 1.125" Ball   Includes 1 x 1.125" Ball Stud 1 x Bolt 10mm x 1.25 bolt long 1 x Bolt 10mm x 1.25 bolt short 1 x Bolt 10mm x 1.25 bolt reverse thread short 1 x Bolt 10mm x 1.50 bolt short 1 x lock washer   Tech spec Weight ball only: 20 grams Weight ball kit: 110 grams Materials: Billet Aluminum, Nitrile, hardened Steel Diameter: 1.125” (29mm) Height: 1.37" (35mm) Extension: 0.78" (20mm)   Details: Universal Fit. Every ball kit includes 4 bolts to allow fitment to any bike and eliminate unsightly adapters. Larger size. Our ball is 1.125”, and even that small increase in diameter makes a big difference in rigidity. This means you don’t have to overtighten the arm to keep it from moving while riding. Won't Crush. Our aluminum-filled base ball, coated with high-quality nitrile rubber won’t degrade under extended compression. You won’t have to repeatedly adjust your mirrors, because both ends of the system are designed to last. Won't spin. We include a lock washer that secures the ball in relation to the bike. SKU# BK

Doubletake replacement 6.0" arm   Doubletake's new 6" (150mm)  arm.   Technical spec Length center to center: 6" (150mm) Length overall: 7" (178mm) Arm weight: 150 Grams Material: A380 Die Cast aluminum   Details: Better hold, less effort. The whole system has been engineered together to keep the mirror from moving, except when it has to in an impact. Longer Length. The Doubletake Arm 6.0 is 15% longer than anything else on the market, offering great visibility especially around luggage. Radial Ridges. The clamping surface at the base has radial ridges to hold the ball more securely. These ridges prevent the arm from unintentionally rotating relative to the base, but without mechanical interference that could be damaged under impact. Asymetrical Clamping. Because the ball diameters are different, the clamp is located off-center toward the mirror. The larger base diameter creates more stiffness at the bottom, and the offset clamp grips the mirror tighter to equalize rigidity. Easy Adjustment. Our low profile thumb nut is 25% longer to make adjustment easy even wearing gloves. Compatible. Mirror end 1" socket works with any 1" ball accessory (GPS, Camera, etc). SKU# ARM6.0   NOTE: Requires Doubletake ball kit for base.

Doubletake replacement 3.5" arm - Doubletake's new 3.5" (90 mm)  arm.   Technical spec Length center to center: 3.5" (90 mm) Length overall: 4.5" (115 mm) Arm weight: 70 Grams Material: A380 Die Cast aluminum   Details: Better hold, less effort. The whole system has been engineered together to keep the mirror from moving, except when it has to in an impact. shorter Length. The Doubletake Arm 3.5 is the one to go for if you use the bike in ahrder off-road- But less visibility, due to reduced length compared the the 6.0" arm. Radial Ridges. The clamping surface at the base has radial ridges to hold the ball more securely. These ridges prevent the arm from unintentionally rotating relative to the base, but without mechanical interference that could be damaged under impact. Asymetrical Clamping. Because the ball diameters are different, the clamp is located off-center toward the mirror. The larger base diameter creates more stiffness at the bottom, and the offset clamp grips the mirror tighter to equalize rigidity. Easy Adjustment. Our low profile thumb nut is 25% longer to make adjustment easy even wearing gloves. Compatible. Mirror end 1" socket works with any 1" ball accessory (GPS, Camera, etc). SKU# ARM3.5   NOTE: Requires Doubletake ball kit for base.

Replacement glass reflectorsfor Doubletake adventure mirrors   The Adventure Mirror is perfect for multi-cylinder adventure bikes where the mirrors are kept up most of the time. This mirror offers the widest field of view, and is ideal for riding paved and dirt roads.   Made from super tough glass reinforced Zytel Housing guaranteed against breakage Convex lens meets SAE and CE specifications Reflector Dimensions: 5.25" x 3.5" (135mm x 90mm) Overall length: 7" (175mm) Recommended for applications where mirror will be extended most of the time