MIVV DAKAR Exhaust silver Yamaha Tenere 700

Ultra low weight MIVV Carbon Heat Shield for Yamaha Tenere 700 high mount exhausts Y.064.LDKB and Y.064.LDKX. This carbon fiber heat shield was designed exclusively for the exhaust system of this motorcycle. This easy-to-install optional product gives a sportier look to the entire exhaust system and avoids direct contact with those parts of the system where high heat peaks are reached.   NOTICE: Optional carbon heat shield (compatible only with Y.064.LDKB and Y.064.LDKX exhausts) Features:   high quality carbon fiber fits only with MIVV exhausts Y.064.LDKB and Y.064.LDKX (Dakar High Yamaha Tenere 700) easy installation   Scope of delivery:   1 x Carbonium heal guard / heat shield

Optional noise reduction for MIVV Dakar exhausts. Noise reduction approx. 2 dB The DB-Killer is a device specially developed to further reduce the noise of the exhaust system. Each DB-Killer model is specifically designed for each bike. Features: for MIVV Dakar silencer only Noise reduction approx. 2 dB     Scope of delivery: 1 x dB-Eater

Due to various homologation regulations, the Yamaha Tenere 700 is, unfortunately, delivered with some electronic power restrictions in various load ranges. What the politicians are happy about is a big thorn in the Tenere rider's side! Due to the electronic restrictions the power of the Tenere 700 is partly determined by the electronics - not by the rider! This results in a reduction of power - and of course in a reduction of driving dynamics and safety. We have the possibility to remove this electronic barrier, which means an extraordinary gain in riding pleasure. In addition, individual adaptation of the maps is possible, e.g. to modified silencers, other air filters, manifolds without catalytic converters, etc. For the classic area of use of the Tenere 700, e.g. on the TET, in the Alps or on small, angular off-road passages or small country roads, the reprogramming means a big plus in performance.   The power gap in the mid-range disappears completely. Overtaking, passing with passenger and luggage or simply a quick spurt - every driving manoeuvre becomes much more agile! The function of ABS is not affected by the flash Retrofitting to the standard condition is possible at any time!   For the reprogramming of your ECU we need the device for about one day here in Cologne! Customers from Germany will receive a parcel delivery note from us by e-mail. This can be used to hand in the ECU at any post office free of charge. For orders from outside Germany, please post the ECU to us after the order of the Flash in the shop.Please include a short note about the changes you have made to the bike and also your wishes. If possible, add a printout of the order confirmation you have received by email.   We need the ECU here in house for 1 day. Depending on the parcel delivery time, you will have the ECU back after few days only.   Details: full control over the throttle valves adjustment of the injection maps adjustment of the ignition maps change of fan start temperature (optional) better acceleration disable of immobilizer possible (optional) disable of closed-loop possible (optional) reprogramming possible at any time not street legal absolutely inconspicuous tuning - not recognisable by dealer, TUV or Police available for all Tenere 700, Tenere 700 Rally models instructions for removing the ECU can be found in the "Download" tab above.   Change of: Eliminate Factory Restrictions Lower Cooling Fan Cut-In Temps Increased Acceleration & Top Speed Improved Throttle Response & Control Improved Fuel & Ignition Maps Eliminates Factory Throttle Restrictions Optimise Throttle FBW Maps (Where Relevant) Eliminate Timing Retards Increase Rev & Speed Limiter Eliminate Fuel Cut/Optimise Off-Throttle (Decel) Mapping Eliminate Immobilizer Eliminate Closed-Loop     Available for all Euro4 models - for 2021 onwards. For Euro5 / Euro5+ models see separate flash for this models. Yamaha Tenere 700 2019 - 2020 Yamaha Tenere 700 Rally Edition 2020

Due to various homologation regulations, the Yamaha Tenere 700 is, unfortunately, delivered with some electronic power restrictions in various load ranges. What the politicians are happy about is a big thorn in the Tenere rider's side! Due to the electronic restrictions the power of the Tenere 700 is partly determined by the electronics - not by the rider!   This results in a reduction of power - and of course in a reduction of driving dynamics and safety. We have the possibility to remove this electronic barrier, which means an extraordinary gain in riding pleasure. In addition, individual adaptation of the maps is possible, e.g. to modified silencers, other air filters, manifolds without catalytic converters, etc. For the classic area of use of the Tenere 700, e.g. on the TET, in the Alps or on small, angular off-road passages or small country roads, the reprogramming means a big plus in performance.   The power gap in the mid-range disappears completely. Overtaking, passing with passenger and luggage or simply a quick spurt - every driving manoeuvre becomes much more agile! The function of ABS is not affected by the flash Retrofitting to the standard condition is possible at any time!   For the reprogramming of your ECU we need the device for about one day here in Cologne! Customers from Germany will receive a parcel delivery note from us by e-mail. This can be used to hand in the ECU at any post office free of charge. For orders from outside Germany, please post the ECU to us after the order of the Flash in the shop.Please include a short note about the changes you have made to the bike and also your wishes. If possible, add a printout of the order confirmation you have received by email.   We need the ECU here in house for 1 day. Depending on the parcel delivery time, you will have the ECU back after short time.   Details: full control over the throttle valves adjustment of the injection maps adjustment of the ignition maps better acceleration change of fan start temperature (optional) disable of immobilizer possible (optional) disable of closed-loop possible (optional) reprogramming possible at any time not street legal absolutely inconspicuous tuning - not recognisable by dealer, TUV or Police available for all Tenere 700, Tenere 700 Rally models instructions for removing the ECU can be found in the "Download" tab above.   Change of: Eliminate Factory Restrictions Lower Cooling Fan Cut-In Temps Increased Acceleration & Top Speed Improved Throttle Response & Control Improved Fuel & Ignition Maps Eliminates Factory Throttle Restrictions Optimise Throttle FBW Maps (Where Relevant) Eliminate Timing Retards Increase Rev & Speed Limiter Eliminate Fuel Cut/Optimise Off-Throttle (Decel) Mapping Eliminate Immobilizer Eliminate Closed-Loop     Available for all Euro5 models: Yamaha Tenere 700 2021 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Tail tidy kit with variably adjustable number plate holder for the Yamaha Tenere 700 2023 onwards   The adjustable angle of inclination and the adjustable indicator holders allow a variety of mounting options. The original number plate / indicator holder is equipped with a splash guard or number plate holder that extends far downwards. This not only looks unsightly but also tends to break off in off-road use. No sawing, bending, drilling on the original parts while installing out tail tidy kit- everything is supplied ready for installation. The filigree holder in high-quality aluminium-steel combination with black powder-coated or anodised finish has been specially developed for the Tenere 700, is robust, weather-resistant and will withstand harshest conditions. The indicator adapters can be adjusted in width (175-210 mm) and fixed in three positions. The angle of inclination is continuously adjustable via slotted holes. Delivery includes high-quality LED number plate lighting with elegant and clean cable routing and indicator adapters for accessory turn signals, alternatively OEM Yamaha turn signals. Number plate holder made of laser-cut and CNC-bent aluminium. Extra strong, off-road adjustable joint made of 3 mm plastic coated steel. Black plastic-coated or black anodised finish for long-lasting surface quality.   The Tenere 700 benefits immensely visually from this sporty rear end. It makes the motorbike as a whole appear much lighter and sportier.   Details: Fits all Tenere 700 2023 onwards with aftermarket indicators that have an M8 or M10 thread Adjustable licence plate holder made of laser-cut aluminium and steel. Adjustable indicator position Width of licence plate area: 180 mm Incl. licence plate holder and licence plate light incl. adapter able for aftermarket indicators Material: aluminium, powder-coated Licence plate light - E-approved No original parts have to be changed or destroyed! Rebuilding to the original parts is possible at any time. Compatible with the high HP Corse and MIVV Rallye silencer. Version for accessory turn signals with M8 thread Reflector / Reflector not included - please order separately if required. See accessories   Scope of Delivery: Tail tidy kit LED number plate light Adjustable licence plate holder Adapter brackets for 8 mm threaded aftermarket indicator Adapter cable for aftermarket indicators   Fits for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 - 2024

Tail tidy kit with variably adjustable number plate holder for the Yamaha Tenere 700 (for use with oem indicators)   The Tenere 700 benefits immensely visually from this sporty rear end. It makes the motorbike as a whole appear much lighter and sportier. Our no.1 mod for the T7!   The adjustable angle of inclination and the adjustable indicator brackets for the OEM Yamaha LED indicat allow a variety of mounting options. The original number plate / indicator holder is equipped with a splash guard or number plate holder that extends far downwards. This not only looks unsightly but also tends to break off in off-road use. No sawing, bending, drilling on the original parts while installing out tail tidy kit- everything is supplied ready for installation. The filigree holder in high-quality aluminium-steel combination with black powder-coated or anodised finish has been specially developed for the Tenere 700, is robust, weather-resistant and will withstand harshest conditions. The indicator adapters can be adjusted in width (175-210 mm) and fixed in three positions. The angle of inclination is continuously adjustable via slotted holes. Delivery includes high-quality LED number plate lighting with elegant and clean cable routing and indicator adapters for OEM Yamaha turn signals. When using the big oem LED indicators and a high mount exhaust, indicators has to be mounted in a lower position on the number plate bracket. Number plate holder made of laser-cut and CNC-bent aluminium. All parts are black plastic-coated or with black anodised finish for long-lasting surface quality.   Details: Adjustable licence plate holder made of laser-cut aluminium and steel. Adjustable indicator position Width of licence plate area: 180 mm Incl. licence plate holder and licence plate light Material: aluminium, powder-coated Licence plate light - E-approved No original parts have to be changed or destroyed! Rebuilding to the original parts is possible at any time. Compatible with the high HP Corse and MIVV Rallye silencer. Reflector / Reflector not included - please order separately if required. See accessories including World Raid OEM LED indicator adapters When you want to use aftermarket indicators, other indicator mounting brackets and new adapter cables are needed. See accessories.   Fits for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700Extreme 2023 - 2024 Yamaha Tenere 700Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally ab 2023 - 2024