Preload Adjuster Caps Yamaha Tenere 700

The coiling of this springs for the Tenere 700 is linear, that means that the the spring has the same Nm over the complete travel. So perfect for an adventure bike with long fork travel. Progression of the fork is done by setting the oil level (air chamber) to the needed value by adding or removing oil. The springs are, depending on the spring rate, about 5 - 20% harder than oem Yamaha springs. OEM springs have 5.8 N/mm   Both the range and the extensive test programme using a computer-operated test-bench which simulates the hardest driving situations guarantee that, in combination with the series spring elements, you are driving the optimal solution for your Tenere ! This fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade.   Recommended fork oil: Motul Expert 5W or Kayaba 01M (see accessories below) Air chamber approx. 85 mm - depending on riding style, usage and rider weight You will need approx. 1.3 Liter fork oil   Help for correct spring rate selection: Rider weight always includes clothing 'ready to ride'. Additional weight due to e.g. crash bars, changed bash plate or a larger fueltank should also be taken into account. Weight on the rear, such as a top case, only plays a minor role, as this weight influences almost only the rate of the rear shock.   6.0 N/mm   -   1 step   harder than OEM - Rider weight approx.  75-85 kg  + luggage 6.3 N/mm   -   2 steps harder than OEM - Rider weight approx. 85-100 kg + luggage 6.6 N/mm   -   3 steps harder than OEM - Rider weight approx. 100-115 kg + luggage 6.9 N/mm   -   4 steps harder than OEM - Rider weight more than 115 kg + passenger / luggage   Scope of Delivery: 1 Set Forks springs (2 springs)   Fits for all: Yamaha Tenere 700 2019-2024 Yamaha Tenere 700 Rally Edition 2020 - 2024

Fork slide bearings Yamaha Tenere 700 Replacement set for worn fork bushings (slide bearings). While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. Replacement set of 4 fork bushing to overhaul your Kayaba Tenere 700 forks. We offer a high-quality  set of 4 bushings for both fork tubes. Fits all: Yamaha Tenere 700 ab 2019 Yamaha Tenere 700 Rally ab 2020 Yamaha Tenere 700 Explore ab 2023 Yamaha Tenere 700 Extreme ab 2023 Yamaha Tenere 700 World Raid ab 2022 Yamaha Tenere 700 World Rally ab 2022