SW-Motech Adapter kit for SysBag WP L. For EVO / PRO side carriers, EVO carriers. For the ADVENTURE-RACK and STREET-RACK.

Even more robust, more ready for adventure - but still removable: With the introduction of the first removable carriers for motorcycle cases, weve made our mark on the accessories market, the PRO side carrier is the new generation. Off-road fans will be excited. The bike-specific PRO side carrier of 2.5 mm strong steel is extremely durable.   The PRO side carrier secures side carriers from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser and Shad as well as SysBag 15 and SysBag 30 - the adapter kits are sold seperately. The PRO side carriers numerous functional drill holes enable the mounting of RotopaX canisters and other accessories.   Adapter kits to attach cases from Givi/Kappa, Hepco & Becker, Krauser and Shad are also available. SW-Motech continues to use the trusted and popular QUICK-LOCK fasteners, which were also revised during redevelopment. You can still remove the quick release fasteners by turning a quarter turn with a regular screwdriver or our multitool. You can completely remove the carrier in a snap and only barely visible attachment elements remain on the bike. If you want to permanently attach the PRO side carrier to the bike, the new construction of the quick-release fastener is used. No special attachment kits are needed any more, the PRO side carrier can now be permanently screwed on with less expensive standard parts (M8) a screw kit (M8) is available from us.   Features Extremely durable due to its optimized shape and 2.5 mm thick steel Perfect fit, close to the bike. Fully removable with newly developed, even more robust quick-release fasteners Optional anti-theft protection available For permanent mounting, quick-release fasteners can be replaced with standard parts (M8) Numerous functional bores, also compatible with the RotopaX system. Simple assembly at the original mounting points Effective corrosion protection through the powder coating Secure hold for TRAX and AERO side cases and SysBag 15 and SysBag 30 Adapter kits to attach cases from Givi/Kappa, Krauser and Shad are also available   Material: Steel Color: Black Surface: Powder coated   Note Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers, AERO ABS side cases and SysBag 15 or SysBag 30 with adapter plates. If you do not want to remove the PRO side carrier, but attach it permanently, we recommend the optional screw kit (M8).   Included in delivery 2 PRO side carriers (left + right) Mounting material Mounting instructions   Fits for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Even more robust and ready for adventure - but still removable: with the introduction of the first removable carrier for motorcycle cases, we've made our mark on the accessories market, the PRO side carrier is the new generation. Offroad fans will be impressed. The bike-specific PRO side carrier made of 2.5 mm-thick steel is extremely durable. The PRO side carrier offers side cases from SW-MOTECH, Givi/Kappa, Hepco & Becker, Krauser and Shad as well as the Sysbags (SysBag 15, 30, WP L) a secure fit - the matching adapter kits are sold separately. The PRO side carrier's numerous functional drill holes enable the mounting of RotopaX canisters and other accessories.   We continue to use our trusted and popular QUICK-LOCK fasteners, which were also revised during redevelopment. As usual, the quick-release fasteners can be loosened by a quarter turn with a flat-head screwdriver or our multitool. The carrier can be removed completely in no time and all that remains on the bike are unimposing attachments. For permanently mounting the PRO side carrier on your bike, we now offer a redesigned quick-release fastener. A special mounting kit is no longer required, but the PRO side carrier can now be screwed tightly with cheaper, standard parts (M8). An appropriate screw kit (M8) is available separately from us.   Extremely durable due to its optimized shape and 2.5 mm thick steel Perfect fit, designed to fit close to the bike Fully removable with newly developed, even more robust quick-release fasteners Optional anti-theft protection available For permanent mounting, quick-release fasteners can be replaced with standard parts (M8) Numerous functional bores, compatible with the RotopaX system among others Simple mounting on original mounting points Powerful corrosion protection thanks to powder coating Secure hold for TRAX, AERO and SysBags with adapter plate (SysBag 15, 30, WP L) Adapter kits for attaching cases from Givi/Kappa, Krauser and Shad are also available   Included in delivery   2 x PRO Side carrier Mounting instructions Mounting material   Details   Material: Steel Surface: powder coated Color: black Total Weight: appr. 5,2 kg / appr. 11.5 lb Width built onto motorcycle: 50,0 cm / 19.7 in   Note   Adapter kits are required for aluminum cases from SW-MOTECH and other manufacturers and also for AERO ABS side cases and SysBags with adapter plates (SysBag 15, 30, WP L).

Approved SW-Motech pannier racks EVO version for the Yamaha XT660Z Tenere. The Quick-Lock system is also used in this rack, so it it very easy to remove the racks within a minute. The QUICK-LOCK Side Carrier is the best solution for quickly equipping a motorcycle for long-distance touring. If you need luggage for a trip, click it on - when you arrive at your destination, just click it off. The three installed attachement points are nearly invisible and thus do not spoil the visual effect of the motorcycle when your side Carrier is not in use. Welded construction made steel tube: machine - bended. Needed pannier adapers sold seperately. See accessories. · Removable side carrier to use with almost every established motorcycle case · To mount and demount within seconds at barely visible fixing lugs, due to quick fasteners · Adaptable to TRAX, AERO, Givi/Kappa, Krauser, Hepco & Becker and Shad cases by seperately available SW-MOTECH Side Carrier Adapter Kits · Made of oval tube, carefully constructed position close to the motorcycle · Highly functional and firm · Black powder-coated surface · Rear width with mounted side carriers (without cases): 465 mm · adapter kits for different panniers avaiable - see accessoriers. Included: · EVO carrier · Mounting material · Mounting instructions Features: · To use singly or in combination with SW-MOTECH ALU-RACK GPT.06.569.15000/B · We advise the anti-theft protection QLS.00.046.10100/B · Please note that one adapter kit is necessary! · all parts isted under Accessories  Fits all: · Yamaha XT-660Z 2008-2016 · Yamaha XT-660ZA (ABS) Tenere 2011-2016  

SW-Moteck EVO pannier rack Yamaha XT-660R and XT-660X   QUICK-LOCK  EVO side carrier is the ideal solution for refitting a motor bike in a travel vehicle with side panniers. Mounted when required - afterwards remounted within seconds. Discreet, well mounted fastening flaps are the attachment points of the QUICK-LOCK side carrier. Look and driving characteristics of the motor bike are not influenced.  If you need a case for you trip, you just snap the carrier onto your bike - and afer arrival unsnap it! With only three quick closures the QUICK-LOCK side carrier is mounted or demounted in less than 7 seconds onto the motor bike. The QUICK-LOCK closure can be (un)locked with an €-coin for fast de/mounting - you do not need any tool. Ideal, in case you do not want to drive with your case carriers when on holiday.   Removable side carrier to use with almost every established motorcycle case To mount and demount within seconds at barely visible fixing lugs, due to quick fasteners Adaptable to TraX, Givi/Kappa, Krauser, Hepco & Becker and Shad cases by seperately available SW-MOTECH Side Carrier Adapter Kits Made of oval tube, carefully constructed position close to the motorcycle Highly functional and firm Black powder-coated surface Overall width Side Carrier (without Side cases): 510 mm   Included: QUICK-LOCK EVO Side Carrier Mounting material Mounting instructions   Features: To use singly or in combination with SW-MOTECH ALU-RACK GB-SWM-XT660RX We advise the anti-theft protection QLS.00.614.100 Please note that one adapter kit is necessary! (Listed under Accessories)   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

The smallest model of the SysBag WP family impresses with its enormous versatility. It cuts a fine figure on adventure bikes as well as sporty street machines and despite persistent external influences. Like the slightly larger M model, the SysBag WP S has a built-in EVA component on the front. The result is a clear, elegant shape, the lamination makes the bag waterproof and UV-resistant. A side bag suitable for all uses and is sure to be a reliable and stylish companion for motorcyclists.   The SysBag WP models are your reliable companions for uncompromising motorcycle adventures. Thanks to the careful selection of materials and elaborate workmanship, all three bags are completely waterproof and extremely robust.   There is a suitable SysBag WP for every application and every motorcycle - the three models S, M and L differ in terms of luggage volume and the type of attachment. All three bags have a roll-top closure and an overlapping lid. The inner pocket is removable, two freely positionable dividers with Velcro fasteners make it easy to keep luggage separate.   To allow the bag to be attached quickly to the right-hand SLC side carrier, you'll need to fix the adapter plate that comes included in delivery onto the SysBag WP S in a one-time installation process: Firstly, screw the three mounting elements for the SLC side carrier onto the adapter plate. Next, attach the SysBag WP S to the adapter plate with the loop straps. Once that's done, you can hang the bag on the right-hand SLC side carrier in one simple movement.     Made of TPU material and EVA plastic Attaches to the right-hand SLC side carrier with the included adapter plate 100% waterproof in main compartment Roll-top made of 210 Ripstop TPU MOLLE patch for attaching accessory bags Reinforced handles Reflective details for better visibility Lashing eyelets for attaching cable locks Velcro fasteners to fix the excess belt lengths Inner pocket is removable   Included in delivery   1 x SysBag WP S 1 x Adapter plate right for SysBag WP S 4 x Lashing straps 4 x Anti-slip straps 1 x Paint protection film Mounting instructions Mounting material   Details   Material: EVA / TPU Color: black Size: 32,5 x 16,5 x 33,0 cm / 12.8 x 6.5 x 13.0 in Total Weight: appr. 2,2 kg / appr. 4.9 lb Total Volume: 12,0-16,0 l   Note   If you're looking for bags to match the SysBag WP S with a right-hand adapter plate, you'll also find additional SysBag WP bags with adapter plates for SLC side carriers in the online store. See accessories