Tail tidy kit, adjustable, Yamaha Tenere 700 2019-2022, for aftermarket indicators
€139.95
Available, delivery time: 1-3 days
Tail tidy kit, adjustable, Yamaha Tenere 700 2019-2022, for aftermarket indicators
Tail tidy kit with free adjustable number plate holder for the Yamaha Tenere 700
The adjustable angle of inclination and the adjustable indicator holders allow a variety of mounting options.
The original number plate / indicator holder is equipped with a splash guard or number plate holder that extends far downwards. This not only looks unsightly but also tends to break off in off-road use.
No sawing, bending, drilling on the original parts while installing out tail tidy kit- everything is supplied ready for installation.
The filigree holder in high-quality aluminium-steel combination with black powder-coated or anodised finish has been specially developed for the Tenere 700, is robust, weather-resistant and will withstand harshest conditions.
The indicator adapters can be adjusted in width (175-210 mm) and fixed in three positions. The angle of inclination is continuously adjustable via slotted holes. Number plate holder made of laser-cut and CNC-bent aluminium. All parts are black plastic-coated or with black anodised finish for long-lasting surface quality.
Delivery includes high-quality LED number plate lighting with elegant and clean cable routing and indicator adapters for aftermarket turn signals with M8 thread.
Alternatively OEM Yamaha turn signals adapters (oval shaped opening) can be found in the accessories below.
The Tenere 700 benefits immensely visually from this sporty rear end. It makes the motorbike as a whole appear much lighter and sportier.
Details:
- Adjustable licence plate holder made of laser-cut aluminium and steel.
- Adjustable indicator position
- Width of licence plate area: 180 mm
- Incl. licence plate holder and licence plate light
- Material: aluminium, powder-coated
- Licence plate light - E-approved
- No original parts have to be changed or destroyed!
- Rebuilding to the original parts is possible at any time.
- Compatible with the high HP Corse and MIVV Rallye silencer.
- Come swith adapters for aftermarket turn signals with M8 / M10 thread.
- Shown Indicators / Reflector / Reflector and bracket not included - please order separately if required. See accessories
- for the World Raid Model the seperate sold OEM indicator adapters are needed - see accessories
Fits for all :
- Yamaha Tenere 700 2019 onwards
- Yamaha Tenere 700 Rally 2020 - 2022
OFF-THE-ROAD - OTR-Performance GmbH
Hugo-Junkers-Str. 52-54
50739 Köln, Deutschland
info@off-the-road.de
Accessories
Available, delivery time: 1-3 days
Model specific indicator adapter acble for Yamaha Tenere 700. This adapter cable is needed to connect aftermarket indicator with 3.5mm round plugs to the Yamaha system connectors. So no extra welding or crimping of connectors necessary. Price per Pair Fits all: Yamaha Tenere 700 up to 2022 (without factory LED indicators) Yamaha Tenere 700 Rally up to 2022 (without factory LED indicators) Does not fit 2023 onwards models with OEM mounted LED indicator!
Available, delivery time: 1-3 days
Indicator adapter brackets made from aluminium for Yamaha Tenere 700 with OEM standard or OEM LED indicators By mounting the indicator adapters on the Yamaha Tenere 700 number plate holder / tail tidy kit, the original turn signals can still be used if they are omitted. Sold as a pair. Suitable for all: · Yamaha Tenere 700 with OEM standard indicators · Yamaha Tenere 700 with OEM LED indicators · Yamaha Tenere 700 Rally · Yamaha Tenere 700 World Raid
Available, delivery time: 1-3 days
Small, but very usefull rubber cover for flasher ends with M8 threat. If turn signals are bolt to e.g. a license plate holder, the thread and nut of the turn signal is often visible. The rubber cover not only eliminates this optical flaw, it also prevents from too much dirt on the thread. Suitable for all turn signals with M8 thread. Price per set with 4 pieces.
Available, delivery time: 1-3 days
LED indicator Slight with newest SMD Technology New look with glas in front and rear direction. Flashing to the front direction very bright, to the rear darker. LED in orange colour. The measurements of this indicator are only approx. 45 x 10 mm! Extremely small but very bright! The overall length of the indicator (without threat) is about only 60 mm. E-marked for front and rear use. Newest SMD LED technology for your safety. Avaiable in black or stylish blue, red or white! Depending on the model you might need a pair of resistors or an LED flasher relais! See accessories. · newest SMD Technology · Meassurments: 45x10mm · Length about 60mm · street legal · avaible in different colours · Price per pair
Available, delivery time: 1-3 days
High-quality LED indicator or indicator/tail/brake light combination in a black aluminium housing. Ultrabright SMD LEDs! 3 ultra powerful SMDs enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with clear glass and orange LEDs. The measurements of the indicator head are only 32x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Avaiable as indicator or indicator/tail/brake light combination E-marked for front and rear use. Price for a pair. Measurements: A: 32 mm B: 45 mm C: 11 mm Bolt threat M8 x 1.25 mm, Length ~20 mm. Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories
Available, delivery time: 1-3 days
High-quality SMD LED indicator in a black aluminium housing. Ultrabright SMD LEDs! 5 powerful SMDs make sure you have an unbeatable bright flash light. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with smoke grey glass and orange LEDs. The measurements of the indicator head are only 35x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Also avaiable as an indicator/tail/brake light combination E-marked for front and rear use. Price for a pair. Measurements: Length 44 mm x Height 13 mm x Deepth 15,5 mm (including lens) Rubber arm: D. 13 mm, L. 11 mm Bolt M8 x 1.25 mm, Length ~ 20 mm Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories
Available, delivery time: 1-3 days
Universal number plate reflector mounting bracket. Can be used e.g. with our number plate holders. Length of the longer side up to the bend is 12.5 cm. Delivered without reflector.
Available, delivery time: 1-3 days
Universal number plate reflector. To be used with our reflector mounting bracket. Can be used e.g. with our number plate holders. Can be srewed (M5) or glued (self sticking backside) Size: 120x12 mm Delivered without reflector bracket! See accessories.
Spare Parts
Available, delivery time: 1-3 days
LED number plate light with E-mark in a black anodised aluminium housing. We use this nice, durable and high-quality LED number plate light for many of our number plate holders. Details: Colour: black Material: Aluminium Bolts M5 Bolt distance: 30 mm Size: B 42 x H 15 x T 22 mm 12V / 0,6 W E-marked Length of cable: 250 mm
Available, delivery time: 1-3 days
Small licence plate carrier plate suitable for our OTR rear conversion / Tail Tidy. Material: Aluminium, black powder-coated External dimensions: 17.7 cm x 13.6 cm (7.0" x 5.3")