Tail tidy kit Yamaha Tenere 700 with pannier rack

LED indicator Slight with newest SMD Technology   New look with glas in front and rear direction. Flashing to the front direction very bright, to the rear darker. LED in orange colour. The measurements of this indicator are only approx. 45 x 10 mm! Extremely small but very bright! The overall length of the indicator (without threat) is about only 60 mm. E-marked for front and rear use. Newest SMD LED technology for your safety.   Avaiable in black or stylish blue, red or white! Depending on the model you might need a pair of resistors or an LED flasher relais! See accessories.   Works well with the new Tenere 700 models 2025 onwards   Details: newest SMD Technology meassurments: 45x10mm length about 60mm street legal available in different colours price per pair

The latest LED indicator highlight! Angular stealth look in clear glass design. Clear cover glass, LEDs illuminated in orange, indicator tip with a stylish orange design. The dimensions of the turn signal head are just 45 x 25 mm! Very small and super bright. A 1-euro piece for comparison in the picture.   The total length of the indicator, without thread, is approx. only 60 mm. The turn signals are E-approved for front and rear.   current, bright LED technology for added safety plastic, black, glass smoked grey optically perfectly matching turn signals approx. dimensions: L: 45 x D: 25 x H: 15mm price per pair   Depending on the motorbike model, either a pair of resistors or a new, electronically controlled, load-independent flasher relay is additionally required! See accessories.

The LED indicator Stealth is now avaible in the even smaller Stealth II version! Sharp 'Stealth' look with clear lens design. Cover glass clear, LED glow in orange. Measures of the indicator head only approx. 29x18mm! Extremly small but very bright light. The indicators are E-appoved, for use the front and rear. Sold as a per pair.

High-quality sequnetial LED indicator in a black anodised aluminium housing. Ultrabright SMD LEDs! Ultra powerful SMDs with new sequential Blink technology enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Modern look with clear glass and orange LEDs. The measurements of the indicator head are only 51x13 mm! Extremely small but brighter than a lot of other, much bigger indicators. E-marked for front and rear use. Price for a pair. · Turn signal E-marked for front and rear · Aluminum housing black · slightly tinted glass · 12V / 3.2W · rubber mounted · New sequential Blink technology · Cable length 18cm · Overall length: 88 mm · Dimensions: L 51 x Ø 13mm · Connection: M8 Pair · Price per Pair Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories  

High-quality LED indicator or indicator/tail/brake light combination in a black aluminium housing. 3 ultra powerful SMDs enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with clear glass and orange LEDs. The measurements of the indicator head are only 32x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Available as indicator or indicator/tail/brake light combination E-marked for front and rear use. Price for a pair. Measurements: A: 32 mm B: 45 mm C: 11 mm Bolt threat M8 x 1.25 mm, Length ~20 mm. Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories Works well with the Tenere 700 models 2025 onwards

Why are installing load resistors necessary for LED turn signal lights? Resistors for LED indicator, which have a much lower power consumtion compared to standart 21w indicators. If you don't install load resistors (also known as equalizers) with LED turn signal bulbs, you will experience the notorious hyper flash issue. Hyper flash is exactly what it sounds like, where the turn signal light flashes rapidly and is almost headache inducing. Not only is this ugly, but you may also attract the police who think your bulb is burned out. Just connect the resistors between the indicators and the wiring harness. Delivered as a set for 2 indicators. For the Yamaha XT-660 models as an alternative also an electronic flasher relais can be used. Resistors avaiable in two load values: · 27 Ohms / 5 Watt · 6.8 Ohms / 25 Watt (for bikes with warning flashers like e.g. XT-660, XT-1200Z)