OEM Yamaha height adjustable Adventure Footrest kit Yamaha Tenere 700 The Adventure footrest enhances stability, comfort and traction under a variety of conditions. Pivotable, teethed elements offer 36 possible settings. Individual adjustment for height, position and angle guarantee best ergonomics possible.   Facts: Easy installation to original mounting points 36 position settings (front, back, top, down, angle) Strong connection due to teethed and bolted elements Marks facilitate symmetric adjustment of both sides Profile with rounded edges offer excellent grip Removable rubber insert with increased surface area (ca. 8 x 5 cm) for more support and comfort Material: Electropolished and corrosion resistant cast stainless steel Colour: Silver with black rubber insert   Fits for: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024   Included: 2 footrests Screws for mounting on the footrest holder Mounting instructions

Aluminium handlebar Yamaha Tenere 700, silver or black anodiesed High quality aluminium handlebars for Yamaha Tenere 700. This handlebars have 28.6mm clamping diameter as oem and are ergonomically perfect and visually very attractive. A very good 1:1 replacement for the oem bars. The bars come with the needed thread for bar-end weights as well as the holes to secure the switch housings. Ball burnished finish for increased lifetime durability. Avaiable in balck or silver anodised   Facts: Measurements like oem bar 4 mm wall thickness provides additional stability and breaking resistance with bar end threats and position holes ball burnished finish for increased lifetime durability. handlebars in oversize format of 28.6 mm matt sand blasted finish and look absolutely stylish avaible in following colours: silver, black street legal (TUV approved)   Fit for: Yamaha Tenere 700 2019-2022 Yamaha Tenere 700 Rally Edition 2020-2022   Does not fit the 2023 models with new cockpit / speedo!

Aluminium handlebar Yamaha Tenere 700 with new cockpit design, black anodised   High quality aluminium handlebar for Yamaha Tenere 700 with new vertical cockpit design and 3-way ABS. This handlebars have 28.6mm clamping diameter as oem and are ergonomically perfect and visually very attractive. A very good 1:1 replacement for the oem bars. The bars come with the needed thread for bar-end weights as well as the holes to secure the switch housings. Ball burnished finish for increased lifetime durability. Avaiable in black or silver anodised   Facts:   measurements like oem bar 4 mm wall thickness provides additional stability and breaking resistance with bar end threats and position holes ball burnished finish for increased lifetime durability. matt sand blasted finish and look absolutely stylish avaible in following colours: black street legal (TUV approved)   Fits for all:   Yamaha Tenere 700 2023 - 2024 Yamaha Tenere 700 Rally Edition 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Aluminium handlebar Yamaha Tenere 700 with new cockpit design, silver anodised   High quality aluminium handlebar for Yamaha Tenere 700 with new vertical cockpit design and 3-way ABS. This handlebars have 28.6mm clamping diameter as oem and are ergonomically perfect and visually very attractive. A very good 1:1 replacement for the oem bars. The bars come with the needed thread for bar-end weights as well as the holes to secure the switch housings. Ball burnished finish for increased lifetime durability. Avaiable in black or silver anodised   Facts:   measurements like oem bar 4 mm wall thickness provides additional stability and breaking resistance with bar end threats and position holes ball burnished finish for increased lifetime durability. matt sand blasted finish and look absolutely stylish avaible in following colours: silver street legal (TUV approved)   Fits for all:   Yamaha Tenere 700 2023 - 2024 Yamaha Tenere 700 Rally Edition 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Aluminium handlebar Yamaha Tenere 700 Euro5+ 2025 onwards   High quality aluminium handlebars with 4mm thickness This handlebars have 28.6mm clamping diameter as oem and are ergonomically perfect and visually very attractive. A very good 1:1 replacement for the oem bars. The bars come with the needed thread for bar-end weights as well as the holes to secure the switch housings. Ball burnished finish for increased lifetime durability. Avaiable in black anodised   Facts: measurements like oem bar 4 mm wall thickness provides additional stability and breaking resistance with bar end threats and position holes ball burnished finish for increased lifetime durability. matt sand blasted finish and look absolutely stylish avaible in following colours: black street legal (TUV approved)   Fits for all Euro5+ models: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards

Aluminium handlebar Yamaha Tenere 700 World Raid / World Rally   High quality aluminium handlebars with 4mm thickness This handlebars have 28.6mm clamping diameter as oem and are ergonomically perfect and visually very attractive. A very good 1:1 replacement for the oem bars. The bars come with the needed thread for bar-end weights as well as the holes to secure the switch housings. Ball burnished finish for increased lifetime durability. Avaiable in black anodised   Facts:   measurements like oem bar 4 mm wall thickness provides additional stability and breaking resistance with bar end threats and position holes ball burnished finish for increased lifetime durability. matt sand blasted finish and look absolutely stylish avaible in following colours: black street legal (TUV approved)   Fits for: Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 onwards

Ariete Dirt Zone Grips with a length of 135 mm, perfect use with e.g. Tenere 700 This grips will become the new standard dedicated to Rally, Adventure and Desert riders. Best grip and long lasting material are the key features of this grips. The hypo-allergenic material used in the production of these grips, exclusive to ARIETE, was developed to get exceptional characteristics:     The surface is not porous The molecular structure is dense. It absorbs and neutralizes vibration It is durable, and not subject to cracking It performs superlatively in the “Grip test” The grips are available in 3 colours and 2 versions of the material, soft and medium.     dark-Grey: medium compound light-Grey: soft compound black: soft compound   Facts:   Amazing grip in every situation Cleverly-designed to give exceptional grip and absorb vibration Laser engineered mold 4 built-in wire-on grooves to tighten the wire Anatomically-profiled channel at the inner end for thumb and forefinger Open ends Length 135 mm. suitable for Yamaha Ténéré series Hypo-allergenic and grippy material Universal model for handlebars 7/8” – diam. 22/24 mm Sold as a pair  

Precisely machined adjustable billet clutch and brake lever set for the Yamaha Tenere 700   Our Clutch and Brake Lever are CNC Machined of 6061-T6 billet aluminum to precise tolerances. Each lever made from 7 cnc machined parts. The Clutch and brake levers are fully adjustable in width and length and come in a foldable version to avoid a damage when falling down. The levers even come in a variety of colors to match your Tenere. Just remove your old levers, and re-insert the new one. Simple, but change the look of your bike totally. The levers have a small inset 1-1/4 inches from the end of the lever to provide a break-away point in a garage tip-over or otherwise. Position of the lever adjustable in 6 positions, length adjustable.   With the almost infinite number of different colour combinations, you can put together your own desired lever and make your Tenere unmistakable. Due to the many different variants, the lever sets are always assembled individually to order - so please allow for a short processing time till shipping time of 2-6 working days, depending on the season.   Details: Width adjustable in 6 positions Length adjustable Foldable Made from billet aluminium CNC-machine high grade air craft aluminium Pre-defined breakage-notch for additional safety Available in different colours Street legal (with TÜV certificate)   Fits for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024

Precisely machined billet short adjustable clutch and brake lever for the Yamaha Tenere 700   Our Clutch and Brake Lever are CNC Machined of 6061-T6 billet aluminum to precise tolerances. Each lever made from 7 cnc machined parts. The Clutch and brake levers are fully adjustable in width and come in a short version to avoid a damage when falling down. The levers even come in a variety of colors to match your Tenere. Just remove your old levers, and re-insert the new one. Simple, but change the look of your bike totally. The levers have a small inset 1-1/4 inches from the end of the lever to provide a break-away point in a garage tip-over or otherwise. With the almost infinite number of different colour combinations, you can put together your own desired levers and make your Tenere unmistakable. Due to the many different variants, the lever sets are always assembled individually and made to order - so please allow for a short processing time till shipping of about 2-6 work days (depending on season).   Details: adjustable in 6 positions short Version (2-finger levers) about 3 cm shorter than oem levers made from billet aluminium CNC-machine high grade air craft aluminium pre-defined breakage-notch for additional safety available in different colours street legal (with TÜV certificate)   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024

Extremely lightweight carbon shift rod for the Yamaha Tenere 700, Extreme, Rally and World Raid models   Connectors to the gear lever and  made of high-strength 7075 aluminum CNC and anodized in various colors to protect against corrosion. In addition to the extreme weight savings compared to the original component of almost 75% an absolute visual highlight on each Tenere 700! Weight only about 16 grams!! Nevertheless extremely strong and rigid.   Made in Germany with 5 years warranty.   Details: Rally tested! extremely light - only about 15 grams! lightweight Carbon rod Connection ends made from aluminum, milled Aluminum anodized in different colors easy, precise shifting high-strength, CNC-milled 7075 T6 aluminum optical highlight 5 years warranty Made in Germany by OTR-Performance!     Suitable for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 onwards Yamaha Tenere 700 World Extreme 2023 - 2024 Yamaha Tenere 700 World Explore 2023 - 2024

Main stand made from high quality steel tubing, offering easy use through adequate leverage. The robust tube construction lends itself for maintenance work as well as for secure parking of a fully loaded bike. Installation does not require drilling or welding, the main stand can be mounted directly to existing anchor points on the motorcycle frame. The centerstand has been developed for optimal lean angle and ground clearance and is specifically tailored for the bike model. Its powder coated surface protects the stand from corrosion under all climate conditions.   Features: Made from high quality steel Powder coated surface Adequate leverage for easy use Steady support for maintenance work Optimal lean angle and ground clearance   Included: Centerstand Mounting material Installation instructions   Fits all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 2025 onwards

CNC machined split TRACK:3 race clutch cover with modified clutch arm position for the Yamaha Tenere 700   Our TRACK:3 clutch cover milled from solid CNC combines perfect manufacturing with high-quality materials and innovative features. All components are milled from solid material on our modern CNC machines. We only use extremely tough aerospace aluminium 7075 T6 as the material. The surface of all components is anodised in a high-quality titanium colour for protection. Other colours on request.   The Problem: If you wear sturdy MX boots, the clutch actuation arm will interfere. The strongest part of the boot on the calf is exactly at the height of the clutch arm. You always have the feeling of having to stand "bow-legged" on the right side. The original plastic protection further exacerbates the problem.   In the event of damage to the clutch, the complete right-hand engine cover including the water pump must always be removed. Engine oil and cooling water must be drained. The large seal is often damaged after the cover has been removed. This is no fun, especially off the beaten track when the clutch is slipping, for example.   The Solution: The arm of the clutch actuation was moved by about 35° in the direction of travel. This means that this linkage, which interferes greatly with the boot, is no longer in the contact area of the boot/lower leg. A much better knee connection is possible and you stand much more relaxed on the right footrest.   The right-hand engine clutch cover is now split into 2 parts. Quick and easy access to the clutch is now achieved by unhooking the clutch cable and loosening the 5 screws on the outer cover. The cover seals securely to the engine with a reusable O-ring. The TRACK:3 clutch cover is completely screwed on, no original parts need to be changed! Complete disassembly is possible without any problems.   Scope of delivery: cnc milled billet 2-part clutch cover, titanium-coloured anodised clutch cable clutch cable bracket bearings seals screw set   Details: CNC milled 2-piece clutch cover 7075 T6 aluminum, ultra strong better knee contact to the bike easy and quick access to the clutch discs all necessary small and assembly parts included may be driven on the road, no registration required   Fits for all: Yamaha Tenere 700 2019-2024 Yamaha Tenere 700 Rally Edition from 2020 Yamaha Tenere 700 World Raid from 2022 Yamaha Tenere 700 World Rally from 2023 Yamaha Tenere 700 Extreme from 2023 Yamaha Tenere 700 Explore from 2023

One-piece Comfort Seat for Yamaha Tenere 700 and Rally 2025 onwards Does NOT fit 2019-2024 models!   Ergonomic and optical upgrade for your Tenere. Dual material nish gives enhanced Rally image. Perfect in combination with the adjustable footpegs and the higher screen. See accessories.   Specifications: stepped comfort seat dual material nish gives your Yamaha an enhanced rally look ergonomic upgrade very easy mounting OEM quality and fit   Fits for all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Does NOT fit 2019-2024 models!

The protection against the wind is a fundamental part of your bike and PUIG knows how important it is to help achieve the best aerodynamic coefficient of our screens. For this reason PUIG have developed lateral deflectors that fits all oem or aftermarket screens. They are designed to fit perfectly with the Tenere 700 design, without fitting problems or unwanted gaps.   Made specifically for the Yamaha Tenere 700 the front deflectors provide a plus of aerodynamic protection compared to the oem front deflectors.   Despite its small dimensions, its studied design and strategic placement allow air to be diverted that would impact the rider's upper arms and shoulders, parts that are normally left unprotected and cause muscle fatigue on long routes, creating a clean air flow, without discturbing noise or annoying turbulence.   With an elegant and compact design, the deflectors are perfectly integrated into the modern front of the Yamaha Ténéré 700. They are available in clear, light smoked and dark smoked, so you can choose the colour that best matches the color of your bike.   The delivery include the left and right side deflector and assembly instructions for a correct fitting.   Made to fit with oem handguards. Might interfere with aftermarket handguards.   Street legal product   Fits all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

S3 RALLY and ADVENTURE aluminium footpegs,height adjustable, for the Yamaha Tenere 700   Huge standing area, minimalist design and lightweight aluminium footpegs made from high grade aircraft aluminium 7075. Surface anodised for highest durability and top design. Exchangeable "teeth" for best grip, even when wet or in muddy conditions. Size is bigger than oem, so better ergonomics and feel especially when riding in standing position.   Adjustable in 3 positions:   2.5mm - High / Centered / 2.5mm - Low   Facts:   Rally / Adventure pegs with huge standing area Minimalist and lightweight Size of the peg for the foot: 115 x 65 mm Overall length incl. hinge: 140 mm Height can be individually adjusted Made of aluminium 7075 Ergal Wider width, for greater stability above the bike The "U" shaped design avoids blockages in ruts The special design keeps the stirrups clean from mud Stainless steel "teeth" exchangeable     Fits all:   Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards

Upgraded EVO version of the OTR gear lever for the Yamaha Tenere 700 - RALLY TESTED!   Foldable and length adjustable aluminum billet cnc-machinedshift Lever assy. Lightweight, stylish, folding aluminium gear lever for your Yamaha Tenere 700. This lever can be adjusted in the length, and together with the height adjustment, every rider will find the fitting set up. To reduce the chance of damage in case of a fall, especially when off-road riding, the lever offers good protection: the spring loaded tip will fold back. This could again prevent damage to the gear shaft or breakage of the lever, which could cause serious disruption to any journey. All parts are avaiable as spare parts. Due to a changed geometry compared to the original, the lever has a larger adjustment range. So the lever can also be adjusted in an even lower position compared to the stock lever..   Details: stepless length adjustment. length adjustement approx. -10 to +15mm compared to stock smooth gear change spring loaded folding tip sealed hinge lightweight but strong construction made of high grade aircraft aluminium (7075-T6), silver or black anodised Made in Germany by OTR-Performance black anodised 5-years warranty!   Fits for all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards

Handlebar from the GYTR kit. Lower, more aggressive geometry for sporty off-road use.   Scope of delivery: 1 x GYTR handlebar Rally style   Fits for all: Yamaha Tenere 700 from 2019 Yamaha Tenere 700 Rally from 2020 Yamaha Tenere 700 World Raid from 2022 onwards Yamaha Tenere 700 World Rally from 2023 onwards Yamaha Tenere 700 Extreme from 2023 Yamaha Tenere 700 Explore from 2023

Precisely CNC machined RAID handlebar clamp set for Yamaha Tenere 700   The upper handlebar clamping plate provides l stiffness of the complete set. The handlebar height can be individually varied with additional spacers. We manufacture this clamps on modern cnc machines here in our own production.   The excentric manufacturing of the clamps offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The avaiable versions are the height compared to the stock handlebar clamp height. Measured in mm between the lower end of the handlebar and the top of the triple clamps. The specified height refers to the lower edge of the handlebar to the upper edge of the triple clamp. +0 mm means the same height as standard, +20 mm means the handlebar position is 20 mm higher than standard. If the listed height is not enough for your needs, you can add additonal spacers shown in the 'accessories' section. New bolts are needed as well. OEM brake lines and clutch cables work up to a height 30mm more than stock.   Details: made from aircraft aluminium 7075 T6 handlebar position can be changed +/- 5 mm for- / backwards hight can be adjusted individually color: silver or black anodised additional spacer to lower or rise avaiable. See accessories Made in Germany by OTR 10 years warranty sold as a set   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024

CNC machined handlebar clamps in RALLY version with Scotts steering damper mounting option for the Yamaha Tenere 700   Our CNC-machined handlebar clamp set with mounting option for a Scotts steering damper combines extreme torsional rigidity with simultaneous mounting flexibility. The handlebar position can be varied +/- 5mm forwards/backwards. It can also be combined with our handlebar riser for the Tenere 700. This allows the handlebars to be raised by 20 or 30 mm.   The steering damper is mounted below the new handlebar clamps on a CNC-machined bracket. Thanks to an additional eccentric design of the handlebar clamps, the handlebars can be mounted in the original position or 10 mm further away from the rider. The offset handlebar position is particularly advantageous when riding at a slightly faster pace and puts more pressure on the front wheel.   The Rally clamp plate allows horizontal or vertical mounting of various GPS or navigation instruments as well as RAM mount adapters. The milled handlebar clamping plate also increases the torsional rigidity of the complete handlebar clamp.   All parts are milled from solid material on our modern CNC machines. We only use extremely tough aerospace aluminium 7075 T6 as a material The surface of all components is anodised black for protection.   The mounting kit on the fork bridge and the counterholder are completely bolted, no welding is required! Complete dismantling is possible without any problems. The nickel-plated steel counter bracket, which is also milled and bolted to the frame, is available separately. See accessories   Suitable e.g. for mounting of: Garmin Montana 600 Series Garmin Montata 700 Series Garmin 276CX Series Garmin Zumo XT Series Trailtech Voyager Pro Quad Lock SP Gadgets Ram Mount Samsung Galaxy Active Tab Measurement hole pattern see photo   Scope of delivery: 1 x CNC machined top Rally cross brace, black anodised 1 x CNC machined clamp base, black anodised 2 x CNC machined handlebar riser Bolt set Mounting Instructions   Details: handlebar position same as OEM position Handlebar can be raised by using additional spacers (see accessories) cnc machined handlebar clamps 28.6mm diameter, black anodised all needed mounting parts, bolts steering damper not included fits oem triple clamp   Fits all: Yamaha Tenere 700 2025 onwards* Yamaha Tenere 700 Rally 2025 onwards* Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024   *Tank cover and seam must be lightly machined.

CNC machined handlebar clamps with Scotts steering damper mounting option for the Yamaha Tenere 700   Our CNC-machined handlebar clamp set with mounting option for a Scotts steering damper combines extreme torsional rigidity with simultaneous mounting flexibility. The handlebar position can be varied +/- 5mm forwards/backwards. It can also be combined with our handlebar riser for the Tenere 700. This allows the handlebars to be raised by 20 or 30 mm. The kit is also available with the matching upper clamping plate for mounting additional navigation equipment or the original speedometer unit. See part number LDK-OTR-T700-SC-NAV   The steering damper is mounted below the new handlebar clamps on a CNC-machined holder. Thanks to an additional eccentric design of the handlebar clamps, the handlebars can be mounted in the original position or 10 mm further away from the rider. The offset handlebar position is particularly advantageous when riding at a slightly faster pace and puts more pressure on the front wheel.   All parts are milled from solid material on our modern CNC machines. We only use extremely tough aerospace aluminium 7075 T6 as a material The surface of all components is anodised black for protection.   The mounting kit on the fork bridge and the counterholder are completely bolted, no welding is required! Complete dismantling is possible without any problems. The nickel-plated steel counter bracket, which is also milled and bolted to the frame, is available separately. See accessories   Scope of delivery:   1 x CNC machined top clamp, black anodised 1 x CNC machined clamp base, black anodised 2 x CNC machined handlebar riser Bolt set Mounting Instructions   Details: handlebar position same as OEM position Handlebar can be raised by using additional spacers (see accessories) cnc machined handlebar clamps 28.6mm diameter, black anodised all needed mounting parts, bolts steering damper not included fits oem triple clamp   Fits all: Yamaha Tenere 700 2025 onwards* Yamaha Tenere 700 Rally 2025 onwards* Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024   *Tank cover and seam must be lightly machined.

High-quality CNC-milled and extremely torsion-resistant handlebar brace for mounting GPS or navigation equipment on the handlebar clamp.   The clamping plate allows horizontal or vertical mounting of various GPS (e.g. Garmin, navigation instruments, RAM MOUNT or Quad Lock adapters.   The additional upper handlebar clamping plate provides a high torsional stiffness and reinforces the oem handlebar clamps. The shape of the crossplate follows the oem design, so this fits neat into the overall look. The handlebar height can still be varied individually with additional spacers. We manufacture this clamps on modern cnc machines here in our own production. Made from high grade aircraft aluminium 7075 T6 in our own in house manufacturing. Made according to our own design and CAD construction. Surface black anodised   Fits only oem Yamaha Tenere 700 handlebar clamps.   Fits for mounting of e.g.:   Garmin Montana 600 series mount Garmin Montata 700 series mount Garmin 276CX series mount Garmin Zumo XT Series mount Trailtech Voyager Pro mount Quad Lock Mount SP Gadgets Mount Ram Mount Samsung Galaxy Active Tab mount measurements hole pattern see picture Details:   horizontal or vertical mount possible M5 threads made from aircraft aluminium 7075 T6 high torsional stiffness color: black anodised approx. 125 gr Made in Germany by OTR 10 years warranty   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards

High-quality CNC-milled, ultra strong and extremely torsion-resistant RALLY handlebar brace for mounting GPS or navigation equipment on the handlebar clamp.   The clamping plate allows horizontal or vertical mounting of various GPS or navigation instruments as well as RAM mount adapters. The milled handlebar clamping plate also increases the torsional rigidity of the complete handlebar clamp.   The additional upper handlebar clamping plate provides a high torsional stiffness and reinforces the oem handlebar clamps. The shape of the crossplate follows the oem design, so this fits neat into the overall look. The handlebar height can still be varied individually with additional spacers. We manufacture this clamps on modern cnc machines here in our own production. Made from high grade aircraft aluminium 7075 T6 in our own in house manufacturing. Made according to our own design and CAD construction. Surface black anodised   Fits only oem Yamaha Tenere 700 handlebar clamps. With separately available risers (see accessories), the handlebar position can also be varied in height if required. See accessories.   Fits for mounting of e.g.: Garmin Montana 600 series mount Garmin Montata 700 series mount Garmin 276CX series mount Garmin Zumo XT Series mount Trailtech Voyager Pro mount Quad Lock Mount SP Gadgets Mount Ram Mount Samsung Galaxy Active Tab mount measurements hole pattern see picture Details: horizontal or vertical mount possible M5 threads made from aircraft aluminium 7075 T6 high torsional stiffness color: black anodised Made in Germany by OTR 10 years warranty   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Precisely CNC machined and strong RAID handlebar crossplate set for Yamaha Tenere 700   The additional upper handlebar clamping plate provides a high torsional stiffness and reinforces the oem handlebar clamps. The shape of the crossplate follows the oem design, so this fits neat into the overall look. The handlebar height can still be varied individually with additional spacers. We manufacture this clamps on modern cnc machines here in our own production. Made from high grade aircraft aluminium 7075 T6 in our own in house manufacturing. Made according to our own design and CAD construction. Surface black anodised   Fits only oem Yamaha Tenere 700 handlebar clamps. With separately available risers (see accessories), the handlebar position can also be varied in height if required. See accessories. Details: made from aircraft aluminium 7075 T6 high torsional stiffness color: black anodised additional spacer to rise handlebar avaiable. See accessories Made in Germany by OTR 10 years warranty   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Spacers to extend short heated grips Perfect for installing aftermarket heated grips with 120mm length on motorbikes with standard 130 / 135 mm long grips like the Yamaha Tenere 700 or Yamaha XT-1200Z/ZE.   20 mm long ffor heated grips with 120 mm overall length plastic, black