Acerbis exhaust protector made from high temperature resisting silicone.   It is always annoying when a new silencer is immediately scratched the first time it is used off-road. Prevents scratching the silencer when you have a fall over. Also may prevent getting ugly dents.   Details:   Silencer protection against dents and scratches Circumference 200/400 mm Locking system through micrometric closing bands Heat resistant Made from 100% silicone Weight: 110 gr.   Fits:   universal

Akrapovic Yamaha Tenere 700 Slip-on titanium muffler.   Made of titanium and stainless steel. Upgraded with a a carbon heat shields and carbon silencer clamp, this silencers will give your Tenere the special look. Nice, deep and powerfull sound - much better that stock. Better power output in torque and hp as well. One of the best exhaus systems for the Yamaha Tener 700. Also avaiable as a full system with racing headpipe!   Specifications: Made of high quality, heat resistant titanium alloys Carbon heat shield and mounting bracket Exciting sound & design Weight reduction thanks to usage of quality material - titanium about 2.3 kg less than stock muffler Material: Heat resistant titanium alloys EC homologated for street use in all of Europe (2019 -2020 Euro4 models) Akrapovic Nr: S-Y7SO2-HFTT   Fits all: Yamaha Tenere 700 2019-2020 Yamaha Tenere 700 Rally Edition 2020   Note: Mounting is possible on all Tenere 700 models, but the approval only applies to the models listed above

Akrapovic Titanium Exhaust Yamaha Tenere 700   Increased durability and an evolution of muffler design and shape. Constructed from lightweight titanium and finished with a handmade newly designed carbon fibre heat shield and end cap, with an imprinted muffler to add to the visual impact. 33,3% less weight than the standard stock version. EC/ECE type approved and a simple plug-and-play installation, with no remapping needed. Made of titanium and stainless steel. Upgraded with a a carbon heat shields and carbon silencer clamp, this silencers will give your Tenere the special look. Nice, deep and powerfull sound - much better that stock. Better power output in torque and hp as well. One of the best exhaus systems for the Yamaha Tener 700! Also avaiable as a full system with racing headpipe!   Specifications: New Design and shape EURO 4 / 5 homolgation +2.3 PS at 5200 r/pm About + 5 Nm at 5000 r/pm Made of high quality, heat resistant titanium alloys Carbon heat shield and mounting bracket Exciting sound & design Weight reduction thanks to usage of quality material - titanium Material: Heat resistant titanium alloys EC homologated for street use in all of Europe for all models 2019 onwards Weight: 3.200 gramm only About 1.6 kg less than stock muffler   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025  onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition ab 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

  Akrapovic Titanium Exhaust Yamaha Tenere 700 2025 onwards   Increased durability and an evolution of muffler design and shape. Constructed from lightweight titanium and finished with a handmade newly designed carbon fibre heat shield and end cap, with an imprinted muffler to add to the visual impact. 33,3% less weight than the standard stock version. EC/ECE type approved and a simple plug-and-play installation, with no remapping needed. Made of titanium and stainless steel. Upgraded with a a carbon heat shields and carbon silencer clamp, this silencers will give your Tenere the special look. Nice, deep and powerfull sound - much better that stock. Better power output in torque and hp as well. One of the best exhaus systems for the Yamaha Tener 700 with E5 Hologation. Also avaiable as a full system with racing headpipe!   Specifications:   New Design and shape EURO 5.5 homolgation +2.3 PS at 5200 r/pm About + 5 Nm at 5000 r/pm Made of high quality, heat resistant titanium alloys Carbon heat shield and mounting bracket Exciting sound & design Weight reduction thanks to usage of quality material - titanium Material: Heat resistant titanium alloys EC homologated for street use in all of Europe Weight: 3.200 gramm only About 1.6 kg less than stock muffler   Fits all:   Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards

Akrapovic Titanium Exhaust Yamaha Tenere 700 2025 onwards, black   Increased durability and an evolution of muffler design and shape. Constructed from lightweight titanium and finished with a handmade newly designed carbon fibre heat shield and end cap, with an imprinted muffler to add to the visual impact. 33,3% less weight than the standard stock version. EC/ECE type approved and a simple plug-and-play installation, with no remapping needed. Made of titanium and stainless steel. Upgraded with a a carbon heat shields and carbon silencer clamp, this silencers will give your Tenere the special look. Nice, deep and powerfull sound - much better that stock. Better power output in torque and hp as well. One of the best exhaus systems for the Yamaha Tener 700 with E5 Hologation. Also avaiable as a full system with racing headpipe!   Specifications:   Black version New Design and shape EURO 5.5 homolgation +2.3 PS at 5200 r/pm About + 5 Nm at 5000 r/pm Made of high quality, heat resistant titanium alloys Carbon heat shield and mounting bracket Exciting sound & design Weight reduction thanks to usage of quality material - titanium Material: Heat resistant titanium alloys EC homologated for street use in all of Europe Weight: 3.200 gramm only About 1.6 kg less than stock muffler   Fits all:   Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards

Akrapovic Titanium Exhaust Yamaha Tenere 700, Black   Increased durability and an evolution of muffler design and shape. Constructed from lightweight titanium and finished with a handmade newly designed carbon fibre heat shield and end cap, with an imprinted muffler to add to the visual impact. 33,3% less weight than the standard stock version. EC/ECE type approved and a simple plug-and-play installation, with no remapping needed. Made of titanium and stainless steel. Upgraded with a a carbon heat shields and carbon silencer clamp, this silencers will give your Tenere the special look. Nice, deep and powerfull sound - much better that stock. Better power output in torque and hp as well. One of the best exhaus systems for the Yamaha Tener 700 with E5 Homologation. Also avaiable as a full system with racing headpipe!   Specifications:   Black Design New Design and shape EURO 4 / 5 homolgation +2.3 PS at 5200 r/pm About + 5 Nm at 5000 r/pm Made of high quality, heat resistant titanium alloys Carbon heat shield and mounting bracket Exciting sound & design Weight reduction thanks to usage of quality material - titanium Material: Heat resistant titanium alloys EC homologated for street use in all of Europe Weight: 3.200 gramm only About 1.6 kg less than stock muffler   Fits all:   Yamaha Tenere 700 2019 onwards (Euro 4 + Euro 5 models) Yamaha Tenere 700 Rally 2021 onwards Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Explorer 2023 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2020 onwards

Stainless steel racing header made by Akrapovic for the Yamaha Tenere 700   This stainless steel racing downpipe will give your Tenere 700 the special look. Also it improves the sound. Better power output in torque and hp as well. Fits stock and all aftermarket mufflers. In combination with a fitting silencer, you can upgrade the header to a complete racing system.   Specifications: +5.3 PS /  9300 rpm +3.4 Nm / 5800 rpm weight only approx. 1780 grams! less  4.1 Kg compared to stock Made of high quality, heat resistant stainless steel More power and torque Weight reduction thanks to usage of quality material Fits stock and aftermarket silencers Not street legal EURO5 models: Lambda sensor plug extension cable necessary, see accessories EURO5+ models: 2 lambda sensor connectors ECU remapping recommended: For perfect performance, throttle response and durability, special mapping is recommended. Akrapovic number E-Y7R3   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Stainless steel racing header made by Akrapovic for the Yamaha Tenere 700 2019-2024   This stainless steel racing downpipe will give your Tenere 700 the special look. Also it improves the sound. Better power output in torque and hp as well. Fits stock and all aftermarket mufflers. In combination with a fitting silencer, you can upgrade the header to a complete racing system.   Specifications: +5.3 PS /  9300 rpm +3.4 Nm / 5800 rpm less  4.1 Kg compared to stock Made of high quality, heat resistant stainless steel More power and torque Weight reduction thanks to usage of quality material Fits stock and aftermarket silencers Not street legal EURO5 models: Lambda sensor plug extension cable included ECU remapping recommended: For perfect performance, throttle response and durability, special mapping is recommended. Akrapovic number E-Y7R2   Fits all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Titanium or aluminum silencer series from Arrow for the Tenere 700.   The silencers are available with an aluminium or titanium cover. The aluminium version can be ordered in silver or black. You can also choose between a classic exhaust with pipe or a carbon end cap. Supplied with ABE (street legal document) for DM07, DM11 and DM15   All silencers can be combined with a racing manifold. A carbon fibre heat protection cover is also available. See accessories.   Fits for all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024

Racing header made by ARROW for the Tenere 700. This stainless steel or titanium made racing downpipe will give your Tenere 700 the special look. Torque and horsepower are higher compared to the stock headpipe. Also it improves the sound. Fits stock and all aftermarket mufflers. In combination with a good silencer, you can upgrade the header to a complete racing system. Specifications: · Made of high quality, heat resistant stainless steel or titanium · including connector for the Lambda O2 sensor · more power and torque · Weight reduction thanks to usage of quality material · Fits stock and aftermarket silencers · not street legal   Fits all: · Yamaha Tenere 700 2019-2020 (Euro 4)

Lightweight, high quality manufactured Carbonium manifold / boot heat protection for the Yamaha Tenere 700.   Fits for the oem silencer and all silencers with mounting option for the oem head shield

Multi-layer metal seal which is situated between cylinder head and exhaust muffs. Should be exchanged every time the exhaust is mounted. Sold as as a set of 2 pieces. Fits e.g.: Yamaha XT-600 - TT-600 - XT-660 - XTZ-660 - SRX  - Tenere 700

Gasket between manifold and muffler. High quality graphite gasket according to original dimensions. Gasket should always be replaced after disassembly. Size:  46.7 x 42 x 25 mm Price per piece

GYTR Akrapovic Titanium Racing Full System Yamaha Tenere 700   Racing titanium complete system GYTR for the Yamaha Tenere 700, extremely light and powerful. Very lightweight race exhaust system from Akrapovic, with headers, slip-on muffler and end cap all constructed from titanium. Designed to optimise exhaust gas flow, the system works perfectly in conjunction with theGYTR air filter kit, comprising of a bespoke case and filter element, and the GYTR ECU, which adjusts ignition and fuel mapping to maximise power and torque output and delivery. The GYTR performance parts combine to increase performance up to 9 hp.   Details:   Total weight of silencer + complete manifold system only about 4 kg!!! Weight of complete manifold (cylinder to silencer) only about 1.75 Kg!! Connecting diameter to silencer huge 60 mm!! Titan exhaust manifold Titan connecting pipee Special nano-coating of the manifold bushings to improve long-term stability against abrasion / wear caused by vibrations. Coating for the manifold tubes and the silencer Weld-on titanium heat shield in the heel area Titanium outer shell with welded brackets special 8-shaped dB-Killer Internal workings made of titanium for extremely lightweight construction in combination with anti-vibration damping materials Not street legal Fuel adjusting necessary   Fits for all: Yamaha Tenere 700 2019 onwards Yamaha Tenere 700 Rally 2020 onwards Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards

Stainless steel 2-in1- racing decat header pipe for the Tenere 700   This stainless steel 2-in1 racing downpipe will give your Tenere 700 more power and torque. Also the header improves sound noticeable. Fits stock and all aftermarket mufflers. The headpipe comes with two connector threads for Euro4 and Euro5 models. A plug for non needed connector is included in delivery. In combination with a HP-Corse exhaust you can upgrade the header to a complete racing system. The manifold is supplied with two Lambda connection threads. Therefore, the lambda sensor of the Euro 4 or Euro 5 models can be mounted without an extension cable for the Euro 5 models! A plug for non used connector is included.   Specifications: 2 into 1 Stainless Steel no Catalyst Collector Made of high quality, heat resistant stainless steel More power and torque Weight reduction thanks to usage of quality material Fits stock and aftermarket silencers NO Lambda sensor extension cable needed for Euro5 models. HP-Corse number YAT700S-C Weight 1995 GRamm only! Due to power increase not street legal   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

HP Corse Silencer SP-1 Titanium Short, matte-black finish, Yamaha Tenere 700 in the high AS version.   AS version has a modified manifold and dual (upper and lower) carbon heat shield compared to the standard SP1 Short high. The manifold also has a changed routing to allow easier mounting of various pannier racks.   Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.   The SP-1 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-1 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well. Available as a street legal version with homologation.   Tested on the bench, on the hardest roads and gravel roads, SP-1 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.     Specifications: High up silencer kit changed connecting pipe to allow easier mountig of various pannier racks Titanium / stainless steel version with matte-black finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel 2 carbon made heat shields Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP1300HTC-AS Weight reduction thanks to usage of quality materials Euro 4, Euro 5 and Euro5+ homologation Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit   Fits all: Yamaha Tenere 700 ab 2025 Yamaha Tenere 700 Rally ab 2025 Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.   The SP-1 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-1 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   The exhaust system is Euro 4 and Euro 5 homologated. Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well. Available as a street legal version with Euro 4/5 homologation.   Tested on the bench, on the hardest roads and gravel roads, SP-1 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Euro 4 and Euro 5 approved!   Specifications:   High up silencer kit matte black titanium sleeve Titanium / stainless steel version with satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel Carbon made heat shield Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP1300HTC-AB Weight reduction thanks to usage of quality materials Euro 4, Euro 5 and Euro5+ homologation Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit   Fits all: Yamaha Tenere 700 ab 2025 Yamaha Tenere 700 Rally ab 2025 Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

New 2025 SP-2 version! Photos with bike show the old SP-1 version.   Not only the new, embossed end cap of the SP-2 used here, but the titanium body of the exhaust is also given an additional embossing. The SP-2 thus has an even sportier and more dynamic line. Also the new lines enhance rigity of the complete exhaust body.   HP Corse Silencer SP-2 Titanium Short, matte-black finish, Yamaha Tenere 700 in the high AS version.   AS version has a modified manifold and dual (upper and lower) carbon heat shield compared to the standard SP-2 Short high. Explorer version has a changed manifold routing to allow easier mounting of various pannier racks.   Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's homologation, this silencer is street legal as well.   The new SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-2 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.   Tested on the bench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Specifications: High up silencer kit changed connecting pipe to allow easier mountig of various pannier racks Titanium / stainless steel version with matte-black finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel 2 carbon made heat shields Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP2300HTC-AS Weight reduction thanks to usage of quality materials Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit Euro 4, Euro 5 - Euro 5+   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024

New 2025 SP-2 version! Not only the new, embossed end cap of the SP-2 used here, but the titanium body of the exhaust is also given an additional embossing. The SP-2 thus has an even sportier and more dynamic line. Also the new lines enhance rigity of the complete exhaust body.   Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's homologation, this silencer is street legal as well.   The SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-2 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.   Tested on the Dynobench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Specifications: High up silencer kit matte black titanium sleeve Titanium / stainless steel version with satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel Carbon made heat shield Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP2300HTC-AB Weight reduction thanks to usage of quality materials Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit Euro 4, Euro 5 - Euro 5+   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 -2024 Yamaha Tenere 700 Rally Edition 2020 -2024 Yamaha Tenere 700 World Raid 2022 -2024 Yamaha Tenere 700 World Rally 2023 -2024 Yamaha Tenere 700 Extreme 2023 -2024

New 2025 SP-2 version! Not only the new, embossed end cap of the SP-2 used here, but the titanium body of the exhaust is also given an additional embossing. The SP-2 thus has an even sportier and more dynamic line. Also the new lines enhance rigity of the complete exhaust body.   HP Corse Silencer SP-1 Titanium Short Yamaha Tenere 700 in the high AS version.   AS version has a modified manifold and dual (upper and lower) carbon heat shield compared to the standard SP1 Short high. Explorer version has a changed manifold routing to allow easier mounting of various pannier racks.   Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.   The new SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-2 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.   Tested on the bench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Specifications: High up silencer kit changed connecting pipe to allow easier mountig of various pannier racks Titanium / stainless steel version with satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel 2 carbon made heat shields Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP2300HT-AS Weight reduction thanks to usage of quality materials Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit Euro 4, Euro 5 - Euro 5+   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 -2024 Yamaha Tenere 700 Rally Edition 2020 -2024 Yamaha Tenere 700 World Raid 2022 -2024 Yamaha Tenere 700 World Rally 2023 -2024 Yamaha Tenere 700 Extreme 2023 -2024 Yamaha Tenere 700 Explore 2023 -2024

New 2025 SP-2 version! Not only the new, embossed end cap of the SP-2 used here, but the titanium body of the exhaust is also given an additional embossing. The SP-2 thus has an even sportier and more dynamic line. Also the new lines enhance rigity of the complete exhaust body.   Often requested, often tried, but now avaiable in a perfect version. A special Tenere 700 silencer with silencer mounted in a high version. The linkage pipe and the silencer is mounted in a high position on the right hand side of the bike. No damaged swing arms anymore, no problems in hard and tricky off-road use.Our recommendation when it comes to real off-road use with the Tenere. Of course also for street use. With it's Euro 4 and Euro 5 homologation, this silencer is street legal as well.   The SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-2 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well. Available as a street legal version with Euro 4/5 homologation.   Tested on the bench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Street legal version with homologation for Euro 4, Euro 5 ( Euro 5+ coming soon)   Specifications: High up silencer kit Titanium / stainless steel version with satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel Carbon made heat shield Exciting sound & design Weight only about 3100 grams - about 2 kg less than stock SKU: YAT700SP2300HT-AB Weight reduction thanks to usage of quality materials Tail tidy kit necessary for mounting - see accessoriers not compatibly with oem Yamaha tail tidy kit Euro 4, Euro 5 and Euro 5+ homologation   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 -2024 Yamaha Tenere 700 Rally Edition 2020 -2024 Yamaha Tenere 700 World Raid 2022 -2024 Yamaha Tenere 700 World Rally 2023 -2024 Yamaha Tenere 700 Extreme 2023 -2024   DOES NOT FIT TENERE 700 EXPLORER! See version SP1TH-AS

HP Corse Yamaha Tenere 700 SP-2 Titan Short BLACK mid mount Rally Silencer   Often requested, often tried, but now avaiable in a classic rally style version. A special Tenere 700 silencer with silencer mounted in a mid-high version. The linkage pipe and the silencer is mounted in a higher position than standard on the right hand side of the bike. Our recommendation when it comes to a classic style silencer with the Tenere. Of course also for street use. With it's Euro 4, Euro 5 and Euro 5+ homologation, this silencer is street legal as well.   The SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-2 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well.   Tested on the bench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Specifications: Mid-high Classic Rally Stlye exhaust, black Titanium / stainless steel version with black satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel Carbon made heat shield Exciting sound & design Weight only about 3000 grams - about 2.1 kg less than stock SKU: YAT700SP2350LTC-AB Weight reduction thanks to usage of quality materials Euro 4, Euro 5 - Euro 5+   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 -2024 Yamaha Tenere 700 Rally Edition 2020 -2024 Yamaha Tenere 700 World Raid 2022 -2024 Yamaha Tenere 700 World Rally 2023 -2024 Yamaha Tenere 700 Extreme 2023 -2024 Yamaha Tenere 700 Explore 2023 -2024

HP Corse Yamaha Tenere 700 SP-2 Titan Short SILVER mid mount Rally Silencer   Often requested, often tried, but now avaiable in a classic rally style version. A special Tenere 700 silencer with silencer mounted in a mid-high version. The linkage pipe and the silencer is mounted in a higher position than standard on the right hand side of the bike. Our recommendation when it comes to a classic style silencer with the Tenere. Of course also for street use. With it's Euro 4, Euro 5 and Euro 5+ homologation, this silencer is street legal as well.   The SP-2 Titan silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. This special SP-1 was developed especially for the Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   Upgraded with a carbon heat shield and the typical Rally style end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well. Tested on the bench, on the hardest roads and gravel roads, SP-2 Titan guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque.   Specifications: Mid-high Classic Rally Stlye exhaust, silver Titanium / stainless steel version with satin finish Silencer made of high quality, heat resistant titanium alloys and premium stainless steel Carbon made heat shield Exciting sound & design Weight only about 3000 grams - about 2.1 kg less than stock SKU: YAT700SP2350LT-AB Weight reduction thanks to usage of quality materials Euro 4, Euro 5 -  Euro 5+   Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 -2024 Yamaha Tenere 700 Rally Edition 2020 -2024 Yamaha Tenere 700 World Raid 2022 -2024 Yamaha Tenere 700 World Rally 2023 -2024 Yamaha Tenere 700 Extreme 2023 -2024 Yamaha Tenere 700 Explore 2023 -2024

HP Corse exhaust SPS Carbon Short Yamaha Tenere 700   A tribute to design! The SPS-Carbon silencer combines the Italian passion for design and the years of experience of HP Corse in silencer construction. The SPS series was developed especially for larger Adventure bikes like the Yamaha Tenere 700. Developed at the HP Corse R&D center in Bologna / Italy, manufactured with a special hydroforming technology and made for the big and small adventurers around the world.   Manufactured from the highest quality materials, the silencer withstands the most demanding conditions on the gravel roads of the world. Developed for many thousands of kilometres - on- and off-road. The silencer from HPCorse combines excellent performance with a perfect finish and first-class sound. Dyno bench tested, on road and on the most demanding tracks, the HP Corse exhaust is light, reliable, robust and guarantees an increase in performance compared to the original exhaust, especially at low and medium speeds. The muffler has a nice deep and rich sound and perfectly completes the beautiful, but also special design of the Tenere 700.   The exhaust system is Euro-4 und Euro-5 homologated. Upgraded with a carbon heat shield and carbon end cap, this silencer will give your Tenere the special look. Nice, deep and powerful sound - much better that stock, but not too loud. Better power output in torque and hp as well. Available as a street legal version with Euro-4 and Euro-5 homologation.   Tested on the bench, on the hardest roads and gravel roads, SPS CARBON guarantees reliability and superior performance compared to the original exhaust, generating a peak of power especially at low and medium rpm, as well as extraordinary torque. Able to reinvent the rear part of the Tenere, it is available in three different materials: titanium, black ceramic coated stainless steel, satin stainless steel and equipped with a carbon heat Shield.   Euro-4 and Euro-5 approved, the Tènèrè 700 the SPS CARBON exhaust is available in the "short" 300 mm version.   Specifications: Stainless steel version available with a black ceramic coating or satin finish Silencer made of high quality, heat resistant titanium alloys or premium stainless steel Carbon made heat shield and end cap Exciting sound & design Weight reduction thanks to usage of quality materials   Fits all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024