Tractive Suspension Shock X-TREME RALLY +25 mm Long Travel Yamaha Tenere 700, black
€1,159.95
% €1,284.01 (9.66% saved)
Ready to ship in approx. 5 days
Tractive Suspension Shock X-TREME RALLY +25 mm Long Travel Yamaha Tenere 700, black
Tractive Suspension X-TREME PDSII RALLY (225 mm) Long Travel shock Yamaha Tenere 700, black anodised
Tractive Suspension has probably developed ta good shock for sporty use with the Yamaha Tenere 700. The shock absorber is exactly tailored to the needs of extreme long distance travelers trail riders. The shock absorber comes with longer stroke (+25 mm), so that the suspension travel increases from the original 200mm to a remarkable 230mm.
Tracive Suspension uses the revolutionary PDS II Anti Bottoming system (Position-Dependent-Damping System) for these shocks. This is a hydraulic breakdown protection system. The heart of the system is a second damper piston, which effectively prevents breakthrough at the end of the suspension travel in the event of very strong compression, even with a high payload and/or passenger - the damping always works in relation to the travel. Especially during hard off-road use (jumping), during rallies or on extreme tours with high load, the PDS system is a very good feature to ensure the perfect function of the shock absorber even in critical situations.
It effectivily is a cushion that absorbs the high ingoing energy and prevents a hard bottoming of the shock absorber. This leads to increased comfort and safety. At the same time the bottoming impacts on the motorbike frame are minimised, leading to less bent bolts and damages.
Tractive Suspension utilizes only the best materials, top suppliers and highest available technologies in all of the Suspension Products. All basic components are manufactured from the highest quality aluminum alloys or stainless steel. The piston rods are made from CrMo alloy to achieve the best possible strength and ductility at the lowest possible weight. Springs are wound from the most superior material available on the market featuring lightest weight at longest life.
Tractive shocks are based on 4616 system, meaning a piston diameter of 46 mm and a piston rod of 16mm. Dimensions that guarantee a perfect balance between performance, endurance and adjustability. Each shock absorber is dyno-tested for accurate performance before despatch at the Tractive Suspension factory.
Extra steel inserts in the machined aluminum shock fork for perfect guidance and increased durability, even in harshest conditions.
Features:
- Increased +25 mm real wheel travel (225 mm to 200mm oem)
- Increased +25 mm seat height
- Increased +25 mm ground clearance
- Black anodised aluminium housing and adjusters
- 4 different spring rates avaiable to make the shock fit your needs
- 46 mm high flow pistons
- Cold forged and machined 6082 T6 46 mm aluminum shock body for high-strength and maximum heat dissipation
- Stainless steel bushes instead of alu: more durable especially for heavy bikes.
- Low-friction seal with integrated Teflon back-up ring maximizes performance and extends the life of the shock
- Oversized 16 mm high-strength shaft made of chrome-moly steel for maximum strength and durability.
- Low-friction seal with integratet Teflon back-up
- Adjustable rebound damping
- Adjustable compression damping (high + low speed)
- Free adjustable spring preload
- Dampening set up for fully-loaded bike right out-of-the-box, developed by and for demanding touring and adventure riders
- Our recommendation for off-road and extreme trail / Rally riding with the Tenere 700
- Fully serviceable
- Steel inserts in the machined aluminum shock fork for perfect guidance and increased durability
- Tractive part number: 46YA19-T5119-TR
- 5 years warranty
Fits all:
- Yamaha Tenere 700 2019 onwards
- Yamaha Tenere 700 Rally 2020 onwards
Spring rate guidelines:
Please choose the weight including helmet, jacket, boots etc.
After order, please fill out the Suspension Setting Questionaire (check 'Documents' Tab) and email to us.
- 80 N/mm - Riders weight up to 80 kg and light luggage
- 85 N/mm - Riders weight 80-100 kg, including passenger and light luggage 15 kg
- 90 N/mm - Riders weight 100-120 kg including passenger and light luggage 15 kg
- 95 N/mm - Riders weight 120+ kg and more including passenger and luggage
Tractive Suspension BV
Gildekamp 26
5431 SP ST Cuijk, Niederlande
motorbike@tractivesuspension.com
Accessories
Ready to ship in approx. 5 days
Tractive Suspension X-TREME RALLY (230 mm) Closed-Cartridge Kit BLACK Yamaha Tenere 700, BLACK Edition Tractive offers an excellent suspension upgrade with an extra 30 mm of travel for the front fork of the Yamaha Tenere 700. Perfect for world travellers, hard off-road and Rally riders with heavily changing loads and higher speed in hard terrain. The special feature is the closed-cartridge with a 230 mm travel - this is 30 mm more than oem wheel travel (200 mm). In the Closed-Cartridge, oil and gas (nitrogen) are separated by a bladder, in a machined closed aluminium tube. This guarantees very constant and temperature independent absorption, preventing foaming and cavitation of the oil, to achieve consistent damping. The piston used is one of the largest available on the market. Compared to the original fork piston with 20 mm, Tracitive uses a huge 35 mm piston. This increases the area for the shims many times over - very high load capacity and precision in damping! The newly developed cartridge system delivers both: comfort and very good performance. In addition, generous service intervals are another advantage of the new development that should not be underestimated. The slim design of the Tractive Closed-Cartridge Kits allows the perfect installation in the fork of the Tenere 700, while the Tractive Suspension Kit is very easy to mount: Remove the standard fork and install the closed cartridge kit with little effort. This is simply exchanged against the inner workings of the original fork. No modifications to the fork are necessary. The triple clamps, brakes, wheel and axle remain intact! Thanks to the conversion, the fork is fully adjustable at the front fork after the conversion. Rebound and compression stages (20 clicks each) are located in separate fork legs. On both sides the spring preload can be added up to 10mm. With the new damping characteristics the bike simply has more to offer - it's the big change. More comfortable and much more precise work of the fork, thus adding a big secuitry for bottoming out. Different spring rates (5,6 N/mm, 6,0 N/mm, 6,4 N/mm, 6,8 N/mm and 7,2 N/mm) are available and guarantee the adaptation to individual weights. A hydraulic stop, the PDS, prevents the front fork from bottoming out in extreme situations. The cartridge kit improves both comfort and performance of the Tenere 700 significantly - especially with different load conditions with/without luggage and passenger. This is exactly what the modern Tenere 700 needs in order to guarantee a smooth ride on asphalt or gravel and a fast and accurate ride on small trails. Due to the longer design and increased travel, the seat position rises by about 30mm. A longer shock or changed rear suspension linkage bones to rise the bike are recommended. Please choose rider weight "ready to ride" including all gear like helmet, jacket, trousers and boots. Technical data: Seat height + 30mm Ground Clearance +30mm Black anodised adjusters Length: 950 mm (+30 mm) Stroke: 230 mm (200 mm oem stroke) Spring series: 370 Spring rates avaiable from 5.6 to 7.2 N/mm Oil recommendation: SAE15 Air chamber: 120mm Tractive Nr.:35YA19-D5315-TR Scope of delivery: 1 Cartridge kit with adjustable rebound 1 Cartridge kit with adjustable compression Cartridges come pre-gased and oil filled, ready for mounting and driving 2 Preload adjuster Caps 1 tool for adjustment 1 tool for fork caps 1 Liter fork oil Tool for Preload adjustment Fits all: Yamaha Tenere 700 2019 onwards Yamaha Tenere 700 Rally 2020 onwards
Ready to ship in approx. 5 days
Complete suspension link arm (pivot) bearing repair kit for Yamaha Tenere 700 model range. Comes with all needed parts to exchange the complete link arm bearings and seals. Contains 4 bearings and 4 seals for the swing arm linkage and 2 bearing and 2 seals for the bottom of swingarm. Lower rear shock linkage bearing / seal kit not included. See accessories. The set contains: 6 x high quality needle roller bearings 6 x oil seals (NBR quality) Fits for all: Yamaha Yamaha Tenere 700 2025 onwards Yamaha Yamaha Tenere 700 Rally 2025 onwards Yamaha Yamaha Tenere 700 2019 - 2024 Yamaha Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards
Ready to ship in approx. 5 days
Complete suspension link arm (pivot) bearing repair kit including bearing pins for Yamaha Tenere 700. Comes with all needed parts to exchange the complete link arm bearings and seals. The set contains 4 bearings and seals for the swing arm linkage, 2 bearing and seals for the bottom of swingarm and 1 bearing and 2 seals for the shock linkage. Also included are the hardened shafts for the swing arm linkage, the bottom of the swingarm and the shock. The set contains: 7 x high quality needle roller bearings (4 x linkage, 2 x lower side swingarm, 1 x lower shock linkage) 8 x oil seals (NBR quality) 4 x grounded and hardened shafts Fits all: Yamaha Yamaha Tenere 700 2025 onwards Yamaha Yamaha Tenere 700 Rally 2025 onwards Yamaha Yamaha Tenere 700 2019 - 2024 Yamaha Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards
Spare Parts
Ready to ship in approx. 5 days
Tractive Suspension shock absorber replacement spring Length 235 mm Tractive type 235-xx (xx = N/mm) Suitable e.g. for Tractive Suspension shock 46YA19-T5115 (Yamaha Tenere 700 +25 mm Rally Shock)