Now that you’re the proud owner of a Yamaha Super Tenere XT1200Z/ZE - or maybe have one on order - you want crash bars to protect it. Ours are built from one inch stainless steel so they're extremely resistant to rust, and feature beautiful hand TIG welds. In designing these crash bars, we went through the trouble of maintaining the hidden connector in the front to yield a seamless system. Why is that important? It means the energy of a hard impact on one side can be transferred throughout the bars and to the other side. The three mounts on one side don’t have to take an entire impact load: instead, it is distributed across six mount mounts so none of them are overwhelmed. All of this is important because the crash bars will not only protect the fairing in the case of a crash, but also the Super Tenere’s exposed radiator. We also conducted a thorough study to identify the bike’s contact points when on its side. This led to a crash bar design that offers a wide contact area between the crash bars and the ground. The other contact points will be the handlebar bar ends, and rear passenger peg - protecting the fairing, engine, radiator, and brake and shifter lever.  The crash bars allow full removal of the right-hand side panel. Because the left-hand side panel only requires periodic removal, the bars were not designed to allow removal of the panel. However, the left-hand side panel can be loosened enough to access to the hardware holding the gas tank in place - allowing the tank to be lifted up to gain access to the air box. · Stainless T-304 construction · Hand TIG welding · 1 inch diameter tubing for strength · Available in silver or black · Compatible with Yamaha World-crosser Kit (OEM Frame Guards must be removed) · Height:  38 cm · Width: 50.8 cm · Depth: 45.7 cm · Fits all Yamaha XT1200Z and XT-1200ZE  2010 and later  

The AltRider Luggage Rack for the Yamaha Super Tenere XT1200Z is greatly improved over the stock version making it one the first parts you’ll want to install on your new adventure bike. Designed strong for on or off road riding adventures, it’s made from 3/16 inch (4.75 mm) aluminum and features side flanges for added rigidity and mounting points, as well as a completely redesigned bracket. This design also allows the luggage rack to be run in the low position (without pillion seat or grab handles). It uses the same hardware, so there is nothing to lose.   The AltRider Luggage Rack comes with a mounting bracket, made from 3/16 inch (4.75 mm) aluminum, which replaces the stock plastic mounting bracket and greatly increases the rack’s capacity. Between the bracket and rack we created a cubby that is 8.5 inches (21.6 cm) x 6 inches (15.2 cm) x 3 inches (7.6 cm). The cut-out pattern is perfect for creating a door with a bungee cord or ROK straps, making it a perfect glove box to stuff items in without the need to secure them. The rack itself is uniquely designed with a variety of cut-outs, so you can easily attach your bags with anything from straps to bungee cords to tie downs.   If you want the option of using a top case, the AltRider Luggage Rack provides an interface for the Givi Monokey systems, allowing attachment with a mount kit (sold separately). Carrying additional fuel or water is made easier, too, because the rack was also designed with a Rotopax interface. The rack also interfaces with RAM mounts.   The strong and versatile AltRider Luggage Rack for the Yamaha Super Tenere XT1200Z is a smart solution for packing up for your next ride, and can be used in either the standard or low position. Available in powder coat black.   NOTE: This luggage rack only interfaces with the Givi Monokey top case system. It is not compatible with the OEM top case.   Made from 3/16 inch (4.75 mm) aluminum All stainless steel hardware Only compatible with the Givi Monokey top case system (requires Givi mounting kit - sold separately) Interfaces with RotopaX fuel packs Interfaces with RAM mounts Height: 3 inches (7.6 cm) Width: 14 inches (35.6 cm) Depth: 14 inches (35.6 cm) Weight: 3 lbs (1.4 kg) Compatible with Jesse Luggage   NOTE: Yamaha owners manual specifies to not exceed 5 kg (11 lbs) of weight on the rear rack and subframe, AltRider rear rack weight limit is 5 kg (11 lbs).

The Yamaha Super Tenere XT1200Z has become a definite contender in the ADV world, giving BMW and KTM a serious run for their money. Yamaha’s adventure motorcycle has developed a hefty following of riders that aren’t afraid to take it to the limit. Give your bike an extra step of protection with AltRider Upper Crash Bars. The AltRider Upper Crash Bars mount to the AltRider Lower Crash Bars using custom aluminum clamps to provide a solid foundation. This mounting system also increases the strength of the lower bars by further tying the left and right sides together. This ensures impacts are absorbed by the entire crash bar system. The upper crash bars provide protection for the fairings and radiator, making for a very rugged off-road machine. The upper bars also provide an excellent location for mounting auxiliary light and other accessories. · Upper Crash Bars designed to mount to AltRider Lower Crash Bars - See accessoiries. · Protect upper fairings and radiator · Stainless T-304 construction · Hand TIG welding · 1 inch diameter tubing for strength · Available in silver or black