Acerbis aluminium mounting kit for the RALLY BRUSH and RALLY PROFILE handguards.   The delivery includes all necessary parts for the mounting of the mounting kit on 22 and 28mm handlebars. The clamping parts are made of aluminium, this results in a much higher stability than with the plastic mounting kit.   Fits for all Acerbis RALLY BRUSH and RALLY PROFILE handguards

Acerbis handguards 'Rally Brush' with 22 and 28mm mounting kit The ORIGINAL nylon wrap-around handguard Rally Brush handguards are injection molded out of a strong nylon composite This material is better suited for the weight concerned rider, where a half a pound savings over aluminum is achieved. Top coverage and impact resistance Inner ribs for increased reinforcement Comes equipped with mounting kit to fit 7/8" steel and 7/8" aluminum handlebars ACERBIS · 22 mm + 28.6mm handlebar mounting kit included · Material: Plastic · Colour: black or white · bigger wind deflectors sold seperately - see accessories · Sold as a pair (left + right)

Handguards Acerbis ENDURANCE-X incl. universal mounting kit for 22 and 28 mm handlebars   The Endurance-Xr Rally handguards feature an very strong aluminum bar with spoiler for perfect wind and weather protection. Different colours of the spoiler and the Acerbis Logo make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. This spoiler is visually similar to the Acerbis X-Factor, but somewhat more filigree at the top and on the outside of the handlebars.   Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection.   Closed handguard with aluminum bar and bracelets Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. For its resistance also indicated for use on maxi-enduro.   Impact resistance: 1) Equipped with a 35mm "C" section ANTICORODAL bar. Provides 5 times more resistance than the classic handguard with aluminum bar. 2) The cuffs, oversized with a thickness of 19 mm, guarantee greater strength and increased torsional capacity 3) Expanders made entirely of steel.   Cover: 1) Impact resistant 2) Wide area to protect the pilot's hands more 3) Flexible lower area to absorb accidental contact with the knee.   Brake/clutch levers and pump assemblies Mounting kit included: Mounts to all off road competition bikes (motocross and enduro) with HANDLEBARS SIZE: Inner size from 13.5 -16 mm Outer size from 22 - 28 mm.   Co-molded logo   Material: Polypropylene 16.00% Aluminum 70.00% Steel 14.00%       Fits all: universal

A innovation concerning handguards: Acerbis Multiplo E The Enduro version of the Multiplo handguard is extremely resistent thanks to special hardening treatment used for the aluminum. Due to the curved aluminum bar design, it is possible to make a quick lateral hand release from the grip bar in case of an emergency. Available in various colors.  The changeable, bold on plastic spoilers and the aluminium deflector can be removed easily.  With the in two sizes avaiable plastic spoilers, the handguards are state-of-the-art in design and function. The Enduro version „E“ is special made for the Adventure and Rally use. The handguard can be used with the aluminium insert and the plasic spoilersor only with the aluminium insert. Additional, bigger wind deflectors are sold seperately. See accessories. Including mounting kits for 22 mm and 28 mm handlebars. Fits 22mm and 28mm handlebars (like e.g. Magura or ProTaper). · Closed handguards - the aluminium bar is mounted to the end of the handlebar · due to the curved bar it's possible it is possible to make a quick lateral hand release · Defectors available in various colors · Plastic part can be replaced · Bigger wind deflectors avaiable · including  mounting kit for 22 and 28mm handlebars · black anodised aluminium bars · Sold as a Pair (left+right side) Fits: · universal

ACERBIS Handguards Rally Pro X-STRONG including mounting set for 22 and 28mm handlebars Very strong and sturdy handguards with intergrated aluminium bar for highest strength. Avaiable as a set with or without mounting kit. · extremely sturdy and visually appealing design · Material: Plastic  with reinforced Aluminium inlay · plastic guard with aluminium inlay · easy mounting within minutes · Mounting kit for 22 and 28.6mm handlebars · for handlebar diameter (inner) 13,5mm-19mm · Available in: blue, black, white, red, yellow and orange · Wind deflectors avaiable - see accessories · Sold as a pair for left + right side

Acerbis handguards Rally Profile incl. 22 and 28mm handlebar mounting kit   Acerbis Rally Profile Handguards - Acerbis Adventure and Enduro Handguards. Sturdy handguards made of Polypropylen. The Rally Profile is designed to be lightweight yet still offering excellent protection available. A Nylon composite material injection-molded guard for increased protection and an indexed steel bar-end insert mounts solidly and will not allow guard to rotate in a crash.   Individuial look and a good protection are the main issues of this sturdy handguards. Weather protection for the hands combined with a protection for the brake and clutch lever. A mounting kit for 22 and 28mm aluminium bars is included. Delivered with an universal mounting kit for most bikes. The mount kit includes an wedge anchor which plugs tight into the ends of the handlebar, and keeps handguards from twisting upon impact.   Features:   ACERBIS Handguards 'RALLY PROFILE' Provides strength and durability without excess weight sturdy and visually appealing design Material: Plastic Easy mounting within minutes Mounting kit for 22mm and oversized 28mm handlebars   Included in delivery:   Left and right handguard Mounting kit for 22 and 28mm aluminium bars Sold as a Pair (left+right side)

Handguards Acerbis X-Factor incl. universal mounting kit The X-Factor Rallye Handguards feature an very strong aluminum bar with big spoiler for perfect wind and weather protection. Different colours make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection. Details: · Closed hand guard from Acerbis · very strong aluminium bar · Anticorodal mounting kit to fasten the hand guard to the handlebar · Steel expander for tighter fastening and to oppose torsion in case of impact. · Mounting kit for 22 and 28mm included · big Dual-injection covers · Avaiable in various colour combinations · Sold as a Pair (left+right side) Fits all: · universal

The X-Factory Handguards feature an ultra strong steel bar wrapped with an injection moulded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail / adventure riding or the big adventure as well as for Super-Moto use. We think this is most likely the strongest handguard you can buy.   Facts: Closed hand guard Steel bar covered with plastic in various colours Anticorodal armbands to fasten the hand guard to the handlebar Steel expander for tighter fastening and to oppose torsion in case of impact. Dual-injection covers Avaiable in various colour combinations Mouning kit for 22 and 28 mm bars encluded Sold as a Pair (left+right side)   Fits for: universal

Acerbis exhaust protector made from high temperature resisting silicone.   It is always annoying when a new silencer is immediately scratched the first time it is used off-road. Prevents scratching the silencer when you have a fall over. Also may prevent getting ugly dents.   Details:   Silencer protection against dents and scratches Circumference 200/400 mm Locking system through micrometric closing bands Heat resistant Made from 100% silicone Weight: 110 gr.   Fits:   universal

Replacement Spoiler for Acerbis Multiplo handguards. Easy mounting within minutes only by loosening two screws. Price per pair.  

Solid aluminium chain guard for the Yamaha XT660 model range. Made of laser-cut aluminium, silver or black anodised for best surface protection. Quick and easy fitting with the optimum use of existing fixing points. Easy installation and a sporty look. Extreme lightweight. Fits all: · Yamaha XT-660R   2004-2016 · Yamaha XT-660X   2004-2006 Does not fit to the XT-660X 2007-2016 !

Black anodised brake fluid container cover Yamaha XT-660R and XTX-660 This fancy and functional brake fluid reservoir cover just has to be screwed onto the existing attachment points. This prevents removing the cover of the brake fluid reservoir. The level of the reservoir can still easily be read. Made of laser-cut aluminium, black anodised. Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 Does not fit XT-660ZA ABS!  

Front fork and swingarm slider pads in the new EVO version for the Yamaha XTX-660R and XT660X.   Made off high-strength plastic (POM), protect the fork, swingarm, and the axles/nuts when falling. Even after a small "topple over" or a crash on the kart course the thread of the front or rear axle can be so badly scratched that the nut can hardly be unscrewed. Professional Super Moto optics - cnc machined - Made in Germany!   With different color anodised aluminium inserts. Improved look  - Colour up your bike!   Avaiable in: red, blue or titanium (grey) anodised   Scope of delivery: 4 crash pads for front and rear axle 4 anodised aluminium inserts - made from high grade aircraft aluminium 2 axles for front fork and swingarm all needed mounting parts instructions Made in Germany!   Fits all: Yamaha XT-660R 2004 - 2016 Yamaha XT-660X 2004 - 2007 Yamaha XT-660X 2007 - 2016

Front fender (mudguard ) extension  Yamaha XT660X Super-Moto Designed to protect your bike from debris and splash thrown up by the front tyre. The fender extension helps keep rider and bike cleaner, cuts down on paint damage on the lower fairing and engine case. Also protects important parts of the bike such as the engine casing and the radiator cooler. Made of black plastic. Delivered with mouning instructions and all needed attachment parts. Fits all: · Yamaha XT-660X 2004-2006 · Yamaha XT-660X 2007-2016  

Strong crash bars for the Yamaha XT-660 R/X made by Hepco-Becker. Very good protection of the engine housing. The bars are fixed to the bike at six points, so the whole construction is very strong and gives your bike an high protection. · Very strong CNC bend contruction · Powder coated, black · 6 fixing points to the frame · Delivered with all needed parts · Made in Germany Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016

Neopren fork sleeves to protect the fork tubes from damage by stones, mud or e.g. ice. Fork protector sleeves made of black neopren. Can by mounted under the stock plastic fork protection. Ideal protection for the oil seals against wearing off (mud, dust, ice - in winter...). Easy mounting, just pull it over the fork tubes. Color: black, sold as a pair for both fork tubes.

In case of an accident the foot break lever can easily break the clutch cover that is made of brittle cast aluminium. Our strong clutch cover protection helps to prevent this. Made of high grade aircraft aluminium, fully cnc machined. Very easy to install and great benefit! A quality product Made in Germany by OTR! Sold now in the upgraded EVO version! Fits all: XT660R - XT660X - XT660Z(ZA)

Our engine crash pads for the XT-660 R/X are ideal if you find the look of the crash guards too massive. The precisely CNC machined pads protect the frame, engine, and casing parts. In case of a crash, the plastic pads prevent the engine parts from looping in or cracking (waterpump, engine case). Now delivered in the upgraded EVO version. The plastic pads have a diameter of 60 mm, in order to acchieve the greatest possible contact surface. Furthermore, their wide radius highly improves the slip-effect. A very beautiful mounting plate on the right hand side, made of CNC-milled and black anodised aluminium is the base mount  for the right crash pad. Only in this way it is provided for a firm fit of the pad and frame. In case of an accident, all parts are sold seperately! The left pad can be used also e.g. on the XT660Z! Material: Pad: POM , Mounting bracket: high-grade aluminium, black anodised Will not fit in combination with our big racing headpipes.  

Aluminium made sump guard for the XT-660R and XT660X in combination with 2in1 exhaust systems. This bash plate will give your engine perfect protection while using 2in1 exhaust systems. About 6 cm more ground clearence are avaiable with this modification. Going off road is now fun with the XT!! Made of very strong 3mm aluminium in combination with a strong stainless steel mounting kit.   Details: OTR 2in1 Skid plate for the Yamaha XT-660 R/X protection for the site cap/waterpump fits for the Enduro and Super-Moto model fits perfect to a lot 2in1 exhaust systems robust protection by 3 mm high grade aluminium does not fit with crashbars protection for the crankcase delivery with all required components Made in Germany   Fits for all: Yamaha XT-660R 2004 - 2016 Yamaha XT-660X 2004 - 2016

Going really off road with the XT660R? Or just a nice add-on for your XTX660 Super Moto? With this bash plate made by OTR, the manifolds are well protected against stones, rocks, branches, debris and anything else which may come along your way! Made of 3 mm quality aluminum with an extra strong stainless steel mounting kit. At last, nothing will come between you and your off road trip. Becuse of its low weight it is perfect for the super-moto-version as well. The laser cutteded, CNC bend aluminium sump guard is very durable and comes in two colours. Aluminium silver or cool black anodised. A must when riding your XT offroad.   Details: EVO 2 design protection for the headpipes protection for the engine cover and waterpump much more stronger than the simple and thin Yamaha skid plate robust protection by 3 mm aluminium fits with SW-Motech crashbars delivery with all required components   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

Those who think that hugh, sturdy crash bars look all-too martial and who neither want to get one of our sump guards can chose this good value solution. This water pump bracket will protect your exponed and thereby relatively vulnerable waterpump by absorbing a great deal of the impact with the help of its sturdy backward support. The water pump protection has been manufactured accurately and been cnc laser cutted. In addition, it is protected against corrosion by silver or black anodisation. Mounting takes only five minutes and last but not least improves the look of your XT. Fits all: Yamaha: XT660R - XT660X - XT660Z - XT660ZA - MT03 - Aprilia Pegaso 650 · Solid CNC-lasered aluminium · lightweight protection for the vulnerable water pump · Delivery includes the mounting instructions and all necessary attachment parts · Quality made in Germany · Avaiable in silver or black anodised · 5 years warranty  

In the sorts of places where you’d ideally park an touring enduro, tarmacked parking spaces are hard to find. Parking a bike off-road is only a pleasant experience if the conditions are right. A side stand base extension makes life easier, saving you the strenuous effort of lifting the fully laden machine. The solution is our easy to fit side stand extension that increases the surface area by more than 100%! The Facts: · Safe support for the machine on all surfaces. · Compensates for the leaning angle of the motorcycle. · With serrations for ease of deployment. · Surface area increased by more than 100%. · Rustproof anodised black and stainless steel cover · Model specific, precise cut-out for original foot lined · CNC machined of solid 8 mm (0.31”) thick Dural aluminium. · Easy to fit. Made of stainless steel, aluminium Avaiable for: XT-660R - XT660X  

SW-Motech Engine Guard Yamaha XT-660R/X With this aluminium made sump guard the manifolds are protected against stones, boulders, and anything else which may come along your way! It is made of 3 mm quality aluminum. At last, nothing will come between you and your off road trip. Becuse of its low weight it is also well suited for the super-moto-version. A must when riding your XT offroad. Delivered without shown crash-bars! · protection for the headpipes and engine case · robust protection by 3 mm aluminium · fits with SW-Motech crashbars · delivery with all required mounting parts Fits for: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016

SW-Motech Crash bars for Yamaha XT-660R and XT-660X   Made of steel pipe with a 27 mm diameter with weather and corrosion resistant powder coating in black to match the motorcycle model. The surface finishing is carried out in a state-of-the-art facility in the SW-MOTECH factory in the Czech city of Brünn.   Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance. Bike-specific mounting systems enable reliable, easy installation onto original attachment points.   Details: Constructed of robust steel with a 27 mm pipe diameter. Weather and corrosion resistant powder coating in black. Reliable protection for important components Highly stable construction appropriate for the peg length of the motorcycle Model-specific development guarantees precise fit and reliable frame linkage Optimized lean angle guaranteed Simple mounting by screwing on factory-made mounting points on the frame   Included in delivery 2 x Crash bar Mounting instructions Mounting material Details Material: Steel Surface: powder coated Color: black Total Weight: appr. 3,6 kg / appr. 7.9 lb   Note Suitable for vehicles with or without CAT All Yamaha XT-660R and XT-660X 2004-2016 Shown bash plate not included