Driving the XT660s without this anoying and maddening plopping and banging when closing throttle?  Closing the AGR system with a blanket with help you ouit of this mess. Installing is easy - you do not have to remove the cylinder head for this! Works perfecly with aftermarket exhaust systems. Precisly made from laser cutted stainless steel, glas bead blasted. Including also stainless steel bolds. · no banging and popping in exhaust sound! · Works perfectly with aftermarket exhaust systems · perfect for tuned bikes. · Easy to install Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016 · Yamaha MT-03 2005-2008  

After greater interferences on the open engine you should also exchange this clutch cover gasket. OEM quality! Water-jet cut gasket. Fits e.g : Yamaha XT660R - XT660X - XT660Z Tenere - XT660ZA Tenere - MT-03

Engine clutch cover gasket Yamaha XT-660 models. After opening the clutch cover you should use a new gasket every time! Otherwise it will seep... This is the outer (smaler) gasket. Original equipment quality! Water-jet cut gasket. Fits e.g : · Yamaha XT660R · Yamaha XT660X · Yamaha XT660Z Tenere · Yamaha XT660ZA Tenere - MT-03

Complete overall engine gasket sets in high OEM quality! Includes all metal and paper seals, o-rings, valve gaskets, exhaust gaskets. Oil seals not included High quality gaskets. Also avaiable as an top end gasket set. Fits all: · Yamaha XT-660 R/X · Yamaha XT-660Z Tenere · Yamaha XT-660ZA ABS Tenere · Derbi Mulhacien · Aprilia Pegaso 650 · Yamaha MT-03 (650ccm)

Complete set with oil seals and dust caps. These should be replaced at least every 2 years, depending on the riding performance, to ensure a perfect response of the fork. Due to aging or dirt on the fork tubes tubes, fork oil seals can be damaged. The result is a fork oil leakage at the damaged sealing rings. Leaking fork oil is very dangerous and should be avoided in time. Leaking fork oil attacks plastic, metal and painted surfaces, reduces a safe braking process when in contact with brake parts and causes unsafe grip losses on tires. For quality reasons, we only offer high quality shaft seals and dust caps with 3-fold sealing lip. · better breakaway torque and up to 3x less friction than OE Simmerrings · Patented Max-Life manufacture, which increases the life span by 3-4 times · fork seals have 3 sealing lips · Dust caps are coated with a special grease to improve the response Our Tip: Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray. Fits for: · XT-660R   2004-2016 · XT-660X   2004-2016 · XT-660Z   2008-2014 · XT-660ZA 2011-2014 Does not fit for the XT-660Z / ZA 2015-2016 with lower height dust caps!

Replacement for worn out or leaky stock Yamaha fork oil seals with 43mm diameter. High-quality NOK spare seal set with additional sealing lip (3-fold sealing). Essential as replacement when travelling or as a replacement part for worn stock seals. Sold as a pair. Fits e.g.: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA Tenere (ABS) 2011-2016 · Yamaha XT-1200Z Super Tenere 2010-2013 · Yamaha XT-1200Z Super Tenere 2014-2016 · Yamaha XT-1200Z Super Tenere 2017- · Yamaha XT-1200ZE Super Tenere 2014-2016 · Yamaha XT-1200ZE Super Tenere 2017-

Cylinder head gasket in Yamaha OEM Quality! High quality multilayer metal gasket.   Fits all e.g.:   Yamaha XT-660R Yamaha XT-660X Yamaha XT-660Z Tenere Yamaha XT-660ZA ABS Tenere

<p>       Cylinder head gasket in Yamaha Original Quality!<br />       Quality multi-layer metal gasket.<br />       Fits all XT660 R/X/Z from 2004 and onwards.</p>

<p>       Cylinder head gasket in Yamaha Original Quality!<br />       Quality multi-layer metal gasket.<br />       Fits all XT660 R/X/Z from 2004 and onwards.</p>

OEM generator cover gasket Yamaha XT-660R/X/Z model range. After greater interferences on the open engine you should also exchange the generator cover gasket. Original equipment quality! Water-jet cut gasket. Fits all Yamaha XT-660R - XT-660X - XT-660Z (ZA) Tenere

Water pump housing o-ring/seal. Original equipment quality! For needed water pump ceramical seals and bearing see accessories. Fits e.g.: · Yamaha XT-660R · Yamaha XT-660X · Yamaha XT-660Z Tenere · Yamaha XT-660ZA Tenere ABS · Yamaha MT-03 2006-2009

High quality o-ring for the oil filter cover in OEM quality. Should be changed every time you open the filter cover. There are two o-rings in the oil filter cover. This one is the big one. XT/TT600 - XT660R/X/Z - SRX600 - XT-550 - XTZ-660 - MT-03 - MZ660

High quality o-ring for the oil filter cover in OEM quality. Should be changed every time you open the filter cover. There are two o-rings in the cover! This is the smaller one. XT/TT600 - XT660R/X/Z - SRX600 - XT-550 - XTZ-660 - MT-03 - MZ660

Water pump connection o-ring/seal. Original equipment quality! For needed water pump ceramical seals and bearing see accessories. Fits e.g.: · Yamaha XT-660R · Yamaha XT-660X · Yamaha XT-660Z Tenere · Yamaha XT-660ZA Tenere ABS · Yamaha MT-03 2006-2009  

O-ring for the front fork top caps. Should be changed to prevent leaking when opening the forks tubes, e.g. after fork spring change. Price per piece.  

Stahlbus Yamaha complete Set for a quick, easy and clean oil change. A conventional oil change is always associated with spills and dirty hands. Therefore, this system has been developed with which you can perform an oil change completely safe and clean. The oil drain valve will easily replace the existing drain screw. When changing the oil, you unscrew the cap and put on the hose connector via quick release. Only when this is locked, the valve opens and the oil can be drained into the provided container.   The advantages at a glance: Easy handling due to quick release Drain valve can not be lost No risk of burns from hot oil Seal change is not necessary Sump thread is spared Double outlet protection (protective cap and valve) Connection to suction possible Optimal application for discharge sampling or trapping Protective cover against loss through O-ring Change oil without tools Thus, the oil change makes fun! Made in Germany!   Scope of delivery: Valve body, CNC precision turned part made of high quality steel Copper seal Hose connector, CNC precision turned part made of high quality steel High quality hose 40cm long Protection cover made of aluminum, anodized Illustrated manual   Fit for e.g.: Yamaha Tenere 700 (all) Yamaha Tenere 700 World Raid / Rally (all) Yamaha XT-660R Yamaha XT-660X Yamaha XT-660Z Tenere Yamaha XT-660ZA ABS Tenere Yamaha XT-600 (all) Yamaha TT-600 (all) Yamaha XTZ-660 Yamaha XTZ750

This magnetic oildrain plug keeps your engine free from tiny, metallic residues. You can easily extend the endurance of your engine with this simple part. Made of anodised aircraft aluminium with an extremely powerful AlNICo magnet. Holes for the use of safety wire round off the small but fine component.   Details:   Thread: M14x1.5 Length: 12 mm Drive: hexagon head Material: aluminium, colour anodised Magnet made of AlNiCo LNG44 Holes for safety wire magnetic

Special aluminium sealring for e.g. the brake hose screws. Should be exchanged every time the plug is opened. 2 seals needed for every brake hose screw Dimensions: 10x14x1

Copper seal ring for e.g. the engine oil line fittings. Should be exchanged every time the plug is opened. Fits for M12 screws Dimensions: 12x18x1.5mm   Fits e.g. for all Yamaha:   XT/TT600 XTZ660 XT-660R XT-660X XT-660Z Tenere XT-660ZA ABS Tenere

Special copper seal ring for the air drain screw (oil filter cover). Should be exchanged every time the plug is opened. Fits M5 size air drain plugs (oil filter cover) Dimension 5x9x1mm For all XT/TT600 - XTZ660 - XT-660 R/X/Z - MT-03 - MZ660  

Special copper seal ring for the water drain screw (water pump cover). Should be exchanged every time the plug is opened. Fits M6 size air drain plugs. Dimension 6x12x1mm For all XT/TT600 - XTZ660 - XT-660 R/X/Z - MT-03 - MZ660 - XT-660Z Tenere  

Special copper seal ring for the oil drain plug in the front frame tube. Should be exchanged every time the plug is opened. Fits e.g. for M8 frame oil plug. Fits all XT-660 R/X/Z. Dimension 8x14x2mm  

Special seal ring for the oil drain plug. Should be exchanged every time the plug is opened. Fits for M12 oil plugs  (XT-1200Z)

Special aluminium sealring for the oil drain bolt. Should be exchanged every time the plug is opened. Fits e.g. for M14 oil plugs Dimensions: 14x18x1.5mm Fits e.g.: · Yamaha Tenere 700 · Yamaha MT-07 · Yamaha XT/TT600 · Yamaha XTZ660 · Yamaha XT-660 R/X/ · Yamaha XT-660Z Tenere · Yamaha MT-03 · MZ 660