Fork dust cap/oil seal SKF Yamaha Tenere 700, black
€35.95
Available, delivery time: 1-3 days
Fork dust cap/oil seal SKF Yamaha Tenere 700, black
Fork dust cap/oil seal SKF Yamaha Tenere 700, black
SKF, the leading global supplier of seals for automotive and motorcycle applications, has launched a new series of seals for motorcycle forks. Their extensive experience in the area of shock absorber seals has lead to a new seal that will enhance the enjoyment of your ride. Even though operating pressures and temperatures in motorcycles are moderate when compared to a car or truck, there are some specific factors to be considered. Enduro or Adventure bike forks are the most demanding applications due to a long stroke, high speed and contaminated operating conditions. In addition, there are special dust protection requirements due to the exposed position of the fork and the absence of protective bellows.
In these applications the rider is in direct contact with the front suspension via the handlebars. Therefore, the smoothness of fork movement is vital, as it has a considerable impact on steering behavior.
SKF seal kits for motorcycle forks consist of an oil seal and a wiper seal developed to achieve superior sealing performance without stiction.
As a result of SKF’s extensive experience in the design and material development of seals for suspension systems, SKF has developed a new self-lubricating compound. The design and performance characteristics of the seals made from this compound enable them to keep oil in and contaminants out of the fork, while virtually eliminating stiction and improving performance by reducing friction.
The oil and wiper seals, which are made from a new self-lubricating compound, have been specially designed to provide the following benefits:
- black version (technically identical to the green version)
- less friction (approx. -20%) compared to conventional sealing rings
- use of a self-lubricating material
- increase seal life and performance
- enhance water and dirt protection capability and withstand UV light
- maintain low and constant friction in operation
- reduce wear and air suction
Note: Each SKF seal kit includes 1 oil seal + 1 dust seal. To rebuild both forks you need to order 2 seal kits. Black and green seals are technical the same, only the colour is different.
Fits for all :
- Yamaha Tenere ab 2019 onwards
- Yamaha Tenere 700 Rally 2020 onwards
- Yamaha Tenere 700 World Raid 2022 onwards
- Yamaha Tenere 700 World Rally 2023 onwards
- Yamaha Tenere 700 Extreme 2023 onwards
- Yamaha Tenere 700 Explore 2023 onwards
Our Tip:
Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray.
SKF AB
Sven Wingquists Gata 2
415 50 Gothenburg, Schweden
service@skf.com
Accessories
Available, delivery time: 1-3 days
Yamaha Tenere 700 Ohlins NIX Adventure FKA 114 Cartridge Kit including spring set of your choice For the Dual Sport and Adventure bikes. The Öhlins cartridge kits have now been made for the Yamaha Tenere 700. Based on the successful Öhlins NIX technology, we are proud to introduce Öhlins cartridge kits for this segment. Big sized adventure bikes used in their right element on true adventures both on and off the road can now enjoy the improved comfort and performance from an Öhlins cartridge kit. Öhlins R&D decided to go for a solution based on the successful Öhlins NIX technology to reach the goal of a cartridge that can deliver both comfort and performance, and go longer than an off-road kit between servicing. The small design of the cartridge kit makes it Easy fit in the upside down OE fork of the Tenere Yamaha 700. The kits are easy to install, just pop out the OEM kits and install the Öhlins cartridge kits instead. Thanks to the FKA 100 kits from Öhlins the bikes now has a fully adjustable front end. Rebound damping is on one leg and compression in the other leg, with adjustable spring preload in both legs. Together with an overall improved damping system, the bike is transformed and can deliver so much more. Different springs are available for riders individual demands as well as an effective hydraulic stop inside the kit to prevent bottoming. After tests we feel confident this cartridge kit improves the Tenere 700 both in terms of comfort and overall performance. Fast gravel roads on a weekend or piloting around small trails to find the perfect stop for the night demands both comfort and performance. With this kit the bike delivers that. Technical Data: Length: 923 mm Travel: 210 mm Spring-Series: 08424-series (5.5 - 8 N/mm) Oil recommendation: Ohlins oil - 01309-01 (R&T) Air chamber: 70 mm (~425 ml each fork leg) TÜV / Street legal Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2021 - 2024 Note: Comes as a ready to mount cartridge kit including fork springs. Fork oil needs to be ordered separately. See accessories If you like us to check your order, please fill out the suspension questionnaire (see documents tab) and email it to us.
Available, delivery time: 1-3 days
The coiling of this springs for the Tenere 700 is linear, that means that the the spring has the same Nm over the complete travel. So perfect for an adventure bike with long fork travel. Progression of the fork is done by setting the oil level (air chamber) to the needed value by adding or removing oil. The springs are, depending on the spring rate, about 5 - 20% harder than oem Yamaha springs. OEM springs have 5.8 N/mm Both the range and the extensive test programme using a computer-operated test-bench which simulates the hardest driving situations guarantee that, in combination with the series spring elements, you are driving the optimal solution for your Tenere ! This fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade. Recommended fork oil: Motul Expert 5W or Kayaba 01M (see accessories below) Air chamber approx. 85 mm - depending on riding style, usage and rider weight You will need approx. 1.3 Liter fork oil Help for correct spring rate selection: Rider weight always includes clothing 'ready to ride'. Additional weight due to e.g. crash bars, changed bash plate or a larger fueltank should also be taken into account. Weight on the rear, such as a top case, only plays a minor role, as this weight influences almost only the rate of the rear shock. 6.0 N/mm - 1 step harder than OEM - Rider weight approx. 75-85 kg + luggage 6.3 N/mm - 2 steps harder than OEM - Rider weight approx. 85-100 kg + luggage 6.6 N/mm - 3 steps harder than OEM - Rider weight approx. 100-115 kg + luggage 6.9 N/mm - 4 steps harder than OEM - Rider weight more than 115 kg + passenger / luggage Scope of Delivery: 1 Set Forks springs (2 springs) Fits for all: Yamaha Tenere 700 2019-2024 Yamaha Tenere 700 Rally Edition 2020 - 2024
Available, delivery time: 1-3 days
Ohlins High Performance Fork Oil R&T 01309-01 Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside down forks. The different viscosities available make it possible to select the most suitable oil. What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved. Viscosity: R&T - 01309-01: Viscosity of 19.0 centistokes at 40° Celsius Content: 1 Liter
Available, delivery time: 1-3 days
Front fork repair and overhaul set for the Kayaba Tenere 700 front forks While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. Fork oil seals and dust caps not included. See accessories. Tip: Order fork oil at the same time - see accessories Content: 2 x Slide metal, inner 2 x Slide metal, outer 6 x O-Rings 2 x Seal rings 2 x Safety clips Set for both fork tube (left+right) Fits all: Yamaha Tenere 700 2025 onwards Yamaha Tenere 700 Rally 2025 onwards Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024