Fork springs Ohlins Yamaha XT-660Z Tenere

Öhlins STX 46 ADVENTURE shock Yamaha XT-660Z Tenere   OHLINS manufactures the 'state of the art' shock for the Yamaha Tenere 660. Our recommendation for all world traveller, rally pilots, Super-Moto and touring drivers. All rally bikes made by OFF-THE-ROAD are equipped with Öhlins suspension.   All ÖHLINS shocks are custom made for each bike and each driver. The set up for each shock, the damping and rebound as well as the springs are tested on and off-road to get the best results. They are the results of true tests with your bike and no guesswork! All ÖHLINS shocks work with the "de Carbon" concept. This shock is a high pressure monotube type. The fluid is put under gas pressure and the gas and the fluid are kept apart by a separating piston. The piston is fitted in an external reservoir. This will give you the advantage of stabil suspension work even in the worst conditions.   Features:   Single tube gas shock 46mm piston diameter external reservoir 30-fold adjustable rebound damping 30-fold compression damping free adjustable spring preload depending on weight adjusting, additional charges may apply Ohlins spring series: 01099 / 80 N/mm max. feasible spring rate 95 N/mm - upprice 20.- Euro our recommendation for hard off-road use with the 660 Tenere TUV Certificate   Fits all:   Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA ABS Tenere 2011-2016 on request

Fork slide bearings Yamaha XT-660R und XT-660X Replacement set for worn fork bushings (slide bearings). While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. Replacement set of 4 fork bushing to overhaul your XT-660 forks. We offer a high-quality  set of 4 bushings for both fork tubes.

Complete front fork repair and overhaul set for Yamaha XT660R and XT660X   While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. his is a repair set for both fork tubes. All necessary parts are included. eeded fork oil to be ordered seperately.   Content: Slide metal, inner Slide metal, outer Oil seals Dust caps O-Rings Seal rings Safety clips   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

Professional seal driver for 43mm diameter forks.Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers.Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use. No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet.Perfectly weighted to drive seals. Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings Tool can be splitted, so perfect for use on Up-Side-Down forks like Tenere 700. Fits all e.g. Yamaha Tenere 700 - XT660R - XT660X - XT660Z/ZA Tenere - XT1200Z/ZE - MT-03 and other bikes with 43mm tubes. Price per piece.

Ohlins High Performance Fork Oil 01314-01   Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside down forks. The different viscosities available make it possible to select the most suitable oil.   What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved.   Viscosity:   #10 -  01314-01 : Viscosity of 40.0 centistokes at 40° Celsius   Content: 1 Liter