High up kit Yamaha Tenere 700, 20mm, Street legal
€88.95
Available, delivery time: 1-3 days
High up kit Yamaha Tenere 700, 20mm, Street legal
High up kit 20mm Yamaha Tenere 700, street legal
Our laser cutted and CNC-manufactured linkage (dog) bones notably improve the driving characteristics of the Yamaha Tenere 700.
The caster is shortened by the higher rear end, the motorcycle becomes more handy, the ground clearance is increased. Especially when used for more sporty driving styles you won't want to miss these new reversing levers! A better response characteristic is achieved with the help of the modified gear ratio - more grip is built up at the rear wheel. The look additionally improves because of the raised tail end!
Note:
The TÜV approved and non-TÜV approved bones have the same quality and same strength.
The TÜV approved comes with a TUV certificate, the Race version approved without.
Facts:
- Manufactured in Germany according to DIN ISO 9001
- CNC-made of high-strength steel
- Rising the rear end of the bike for about 20mm
- Made to be used with OEM shocks! If you use aftermarket shocks, check travel and free movement of the shock.
- Street legal version with TUV-Certificate
Fits all:
- Yamaha Tenere 700 2019 onwards
- Yamaha Tenere 700 Rally 2020 onwards
- Yamaha Tenere 700 Explorer 2023 onwards
OFF-THE-ROAD - OTR-Performance GmbH
Hugo-Junkers-Str. 52-54
50739 Köln, Deutschland
info@off-the-road.de
ZUBEHÖR
Available, delivery time: 1-3 days
Rear shock linkage bearing kit for Yamaha XT-660Z Tenere 2008 onwards Often this bearing is mounted with not enough grease during the assembly at Yamaha - this causes a high weraring of this bearing. Check regulary! Contains a high quality needle bearing, a polished bushing and two oem quality seals. Fits all: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016
Available, delivery time: 1-3 days
Öhlins linear fork springs for Yamaha XT-660Z Tenere from 2008 - 2016 Replacing the fork springs is a cost-effective and efficient way to improve the front fork of the XT660Z Tenere. Together with the specially developed fork oil from Öhlins, the response and performance of the original fork can be significantly increased. Depending on motorcycle type, rider weight and personal preferences and in combination with an indivuelle air chamber and oil viscosity improves the driving behavior noticeably. Best material selection and precise manufacturing guarantee a maximum of 1.5% deviation in the spring rate of Öhlins fork springs. The fork springs are made of high quality chrome silicon spring steel, are linear wound, slightly firmer than the original springs, but finer from the response. Lifetime warranty! Delivery with or without fork oil. Tip: Order suitable fork oil at the same time. About 1.5 - 1.6 liters of Öhlins oil 01314 #10 (alternatively viscosity 20 according to SAE specification) are required. Fits for all: Yamaha XT-660Z Tenere 2008-2016
Available, delivery time: 1-3 days
Front wheel bearing set Yamaha XT660 model range. We offer high quality, double sealed (2RS) bearing set from german or european manufactors. Avaiable as complete bearing sets for the front or rear wheel as well as a set for both axles.Due to insufficient sealing of the oem wheel bearings, this parts will be worn quite early. Fitting seals for the front and rear hub can be found in the accessories tab. The set for the front wheel contains: 2 x bearing front wheel hub Fits e.g. all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2012 · Yamaha XT-660Z Tenere 2012-2016 · Yamaha XT-660ZA ABS 2011-2016
Available, delivery time: 1-3 days
Suspension link arm (pivot) bearing repair kit including bearing pins for Yamaha XT-660Z Tenere. Comes with all needed parts to exchange the complete link arm bearings and seals. The set contains the bearings, shafts and seals for the swing arm linkage and the bearings shafts and seals for the bottom of swingarm. Include in delivery: 6 x high quality needle roller bearings 6 x oil seals (NBR quality) 3 x grounded and hardened shafts Fits all: Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA ABS Tenere 2011-2016 Note: Lower shock bearing not included. See accessories.
Available, delivery time: 1-3 days
Complete suspension link arm (pivot) bearing repair kit for Yamaha XT-660Z Tenere. Comes with all needed parts to exchange the complete link arm bearings and seals. Contains 4 bearings and 4 seals for the swing arm linkage and 2 bearing and 2 seals for the bottom of swingarm. Lower rear shock linkage bearing / seal kit not included. See accessories. The set contains: · 6 x high quality needle roller bearings · 6 x oil seals (NBR quality) Fits all: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016