Ohlins Cartridge Kit Yamaha XT-1200Z Super Tenere, Cartridge Kit incl. fork springs 8 Nm

Complete front fork repair and overhaul set for Yamaha XT1200Z and XT1200ZE Super Tenere   While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. his is a repair set for both fork tubes. All necessary parts are included. eeded fork oil to be ordered seperately.   Content: Slide metal, inner Slide metal, outer Oil seals Dust caps O-Rings Seal rings Safety clips   Fits all: Yamaha XT-1200Z Super Tenere 2010 onwards Yamaha XT-1200ZE Super Tenere 2014 onwards

ÖHLINS manufactures the state-of-the-art Adventure shock for the Super Tenere Our recommandation for all long distance drivers, rally pilots, street tourer. All OTR bikes, modified for extreme usage, are equipped with ÖHLINS. All Öhlins shocks are custom made for each bike and driver. The basic setup, both the design of the shim stacks and the calibration of the adjusters, is tested both on road and track. They are the results of true tests with your bike and no guesswork! All ÖHLINS shocks work with the "de Carbon" concept. This shock is a high pressure monotube type. The fluid is put under gas pressure and the gas and the fluid are kept apart by a separating piston. The piston is fitted in an external reservoir, connected by a hose. This will give you the advantage of stabil suspension work even in the worst conditions. Upgrade to any availabl spring rate is charged with 20.- Euro   Features:   Single tube Hose mounted reservoir Adjustable rebound damping Adjustable compression damping Hose mounted hydraulic spring preload adjuster   Fits all:   Yamaha XT-1200Z Super Tenere 2010-2013 Yamaha XT-1200Z Super Tenere 2014 onwards Yamaha XT-1200ZE Super Tenere 2014 onwards

Ohlins High Performance Fork Oil R&T 01309-01   Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside down forks. The different viscosities available make it possible to select the most suitable oil.   What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved.   Viscosity: R&T - 01309-01: Viscosity of 19.0 centistokes at 40° Celsius   Content: 1 Liter

Professional seal driver for 43mm diameter forks.Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers.Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use. No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet.Perfectly weighted to drive seals. Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings Tool can be splitted, so perfect for use on Up-Side-Down forks like Tenere 700. Fits all e.g. Yamaha Tenere 700 - XT660R - XT660X - XT660Z/ZA Tenere - XT1200Z/ZE - MT-03 and other bikes with 43mm tubes. Price per piece.

Complete set with oil seals and dust caps. These should be replaced at least every 2 years, depending on the riding performance, to ensure a perfect response of the fork. Due to aging or dirt on the fork tubes tubes, fork oil seals can be damaged. The result is a fork oil leakage at the damaged sealing rings. Leaking fork oil is very dangerous and should be avoided in time. Leaking fork oil attacks plastic, metal and painted surfaces, reduces a safe braking process when in contact with brake parts and causes unsafe grip losses on tires. For quality reasons, we only offer high quality shaft seals and dust caps with 3-fold sealing lip. · better breakaway torque and up to 3x less friction than OE Simmerrings · Patented Max-Life manufacture, which increases the life span by 3-4 times · fork seals have 3 sealing lips · Dust caps are coated with a special grease to improve the response Our Tip: Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray. Fits all: · Yamaha XT-1200Z Super Tenere DP01 (10-13) · Yamaha XT-1200Z Super Tenere DP04 (14-16) · Yamaha XT-1200ZE Super Tenere DP04 (14-16) · Yamaha XT-1200Z Super Tenere DP07 (2017 onwards) · Yamaha XT-1200ZE Super Tenere DP07 (2017 onwards)