Ohlins Cartridge Kit Yamaha XT-1200Z Super Tenere, Cartridge Kit only

Complete set with oil seals and dust caps. These should be replaced at least every 2 years, depending on the riding performance, to ensure a perfect response of the fork. Due to aging or dirt on the fork tubes tubes, fork oil seals can be damaged. The result is a fork oil leakage at the damaged sealing rings. Leaking fork oil is very dangerous and should be avoided in time. Leaking fork oil attacks plastic, metal and painted surfaces, reduces a safe braking process when in contact with brake parts and causes unsafe grip losses on tires. For quality reasons, we only offer high quality shaft seals and dust caps with 3-fold sealing lip. · better breakaway torque and up to 3x less friction than OE Simmerrings · Patented Max-Life manufacture, which increases the life span by 3-4 times · fork seals have 3 sealing lips · Dust caps are coated with a special grease to improve the response Our Tip: Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray. Fits all: · Yamaha XT-1200Z Super Tenere DP01 (10-13) · Yamaha XT-1200Z Super Tenere DP04 (14-16) · Yamaha XT-1200ZE Super Tenere DP04 (14-16) · Yamaha XT-1200Z Super Tenere DP07 (2017 onwards) · Yamaha XT-1200ZE Super Tenere DP07 (2017 onwards)

Complete front fork repair and overhaul set for Yamaha XT1200Z and XT1200ZE Super Tenere   While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. his is a repair set for both fork tubes. All necessary parts are included. eeded fork oil to be ordered seperately.   Content: Slide metal, inner Slide metal, outer Oil seals Dust caps O-Rings Seal rings Safety clips   Fits all: Yamaha XT-1200Z Super Tenere 2010 onwards Yamaha XT-1200ZE Super Tenere 2014 onwards

Professional seal driver for 43mm diameter forks.Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers.Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use. No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet.Perfectly weighted to drive seals. Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings Tool can be splitted, so perfect for use on Up-Side-Down forks like Tenere 700. Fits all e.g. Yamaha Tenere 700 - XT660R - XT660X - XT660Z/ZA Tenere - XT1200Z/ZE - MT-03 and other bikes with 43mm tubes. Price per piece.

Ohlins front fork springs 08424 - developed for the use in Ohlins cartidge kits   The coiling of this springs for the NIX / FKA cartridge kits is linear, that means that the the spring has the same Nm over the complete travel. The Öhlins fork springs are characterised by a precise linear design.   Both the range and the extensive test programme using a computer-operated test-bench which simulates the hardest driving situations guarantee that, in combination with the series spring elements, you are driving the optimal solution for your bike! This fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade.   Please check if the choosen springs and spring rate will fit your cartridge type / motorcycle.   Ohlins part no: 08424 Length: 420 mm Oil recommendation: 01309 Scope of Delivery:  1 Set Forks springs   Fits for:   Ohlins NIX / FKA Cartridges like e.g. Yamaha XT-1200Z or Yamaha Tenere 700