Steel braided brake line front, single disc, without ABS, Yamaha Tenere 700

€89.95
Available, delivery time: 2 Days
Steel braided brake line front, single disc, without ABS, Yamaha Tenere 700
High grade steel braided brake hose for a 1-brake disc conversion of the front brake Yamaha Tenere 700.
Stainless steel braided hoses and metal made oem matching distributors. ABS is bypassed and can be removed.
Exact pressure point, "eternally" working and nearly indestructable, these are the most important features of the steel braided brake hoses which have been tested a thousand times. In addition to the improved brake hose, the small hand power adds to the security. Delivery including TÜV-Certificate!
What are the advantages of a Steel braided brake line?
Our Stahlflex brake lines provide increased safety feature during the braking process, as steel brake lines. The steel braided lines, in comparison to standard brake lines - do not expand even in heat and therefore respond quicker and more directly. Especially in extreme situations, this steel flex brake lines offer the decisive advantage during the braking process. In addition, our brake lines are practically indestructible. Once a steel braided brake line have been mounted, you never have to change this again.
We recommend having safety-relevant components such as brake lines fitted by a specialist workshop.
We are convinced of our product and therefore you get a 5-year guarantee on all brake lines.
Scope of Delivery:
- 1 x Brake line from master cylinder to left brake caliper
- Aluminium seal rings for the brake hoses
Features:
- single brake line, ABS is bypassed.
- High grade PTFE brake tube, steel braided
- about 50% less weight compared to genuine Yamaha brake lines
- Fittings avaiable in anodised aluminium or stainless steel
- different coating colours avaiable
- better braking performance
- less hand power needed
- TÜV approved
- Rubber reinforcement for off-road use
- lasts extremely long due to UV-protection to the hose
- including needed seal washers
Fits all:
- Yamaha Tenere 700 2019 onwards (ABS is by-passed)
Please note: due to the many possible combinations in the hose / fitting selection, the lines are always custom made to order. Therefore, please allow 2 to 5 working days until dispatch, depending on the season.
If a different fork or a different cartridge with more suspension travel is fitted, please specify this in the comments field of the order.
OFF-THE-ROAD - OTR-Performance GmbH
Hugo-Junkers-Str. 52-54
50739 Köln, Deutschland
info@off-the-road.de
Accessories

Available, delivery time: 2 Days
High grade steel braided brake hose set for the rear brake of the Yamaha Tenere 700 Stainless steel braided hoses and metal made oem matching distributors. So the brake line has same feature as OEM line!! Exact pressure point, "eternally" working and nearly indestructable, these are the most important features of the steel braided brake hoses which have been tested a thousand times. In addition to the improved brake hose, the small hand power adds to the security. Delivery including TÜV-Certificate! What are the advantages of a Steel braided brake line? Our Stahlflex brake lines provide increased safety feature during the braking process, as steel brake lines. The steel braided lines, in comparison to standard brake lines - do not expand even in heat and therefore respond quicker and more directly. Especially in extreme situations, this steel flex brake lines offer the decisive advantage during the braking process. In addition, our brake lines are practically indestructible. Once a steel braided brake line have been mounted, you never have to change this again. We recommend having safety-relevant components such as brake lines fitted by a specialist workshop. We are convinced of our product and therefore you get a 5-year guarantee on all brake lines. Features: high grade PTFE brake tube, steel braided about 50% less weight compared to genuine Yamaha brake lines fittings avaiable in anodised aluminium or stainless steel different coating colours avaiable better braking performance less hand power needed TÜV approved set of 4 hoses included distributor and needed seals rubber reinforcement for off-road use lasts extremely long due to UV-protection to the hose including needed seal washers Fits all: Yamaha Tenere 700 2019 - 2024 Yamaha Tenere 700 Rally Edition 2020 - 2024 Yamaha Tenere 700 World Raid 2022 - 2024 Yamaha Tenere 700 World Rally 2023 - 2024 Yamaha Tenere 700 Extreme 2023 - 2024 Yamaha Tenere 700 Explore 2023 - 2024 Please note: due to the many possible combinations in the hose / fitting selection, the lines are always custom made to order. Therefore, please allow 2 to 3 working days until dispatch, depending on the season.

Ready to ship, estimated delivery time: 1-3 workdays
Lower brake line guide to mount at lower end of fork tube. Our plastic brake line guide helps to neatly route the brake lines when using a high mudguard. The lines are safely guided so that the risk of "snagging" is minimised. The guide can be slid over the installed fork leg, disassembly of the complete fork is not necessary. The part for the brake line can be clipped open, so routing the brake hose is very easy. Clamping Diameter 53 mm Price per piece.

Ready to ship, estimated delivery time: 1-3 workdays
JMC Brake Fluid DOT4 Plus Fully synthetic brake fluid Can also be used in hydraulic clutchs that are compatible with brake fluid Mixture of polyethylene glycol ether and additives High wet boiling point min. 180° C Dry boiling point min. 265° C High viscosity index at -40° C max. 700 mm2/s Low viscosity Good corrosion protection at high temperatures High operational reliability even after long periods of use Better brake response at temperatures down to -40° C Increased safety level Miscible with brake fluids of the same specification Classifications and specifications: Brake fluid DOT 4 Exceeds DOT 3 FMVSS 116 SAE J 1703, J 1704 ISO 4925 Class 6 Application: For hydraulic brake and clutch systems with a boiling point of at least 265° C and a wet boiling point of at least 170° C. Motorbike brake system acc. to DOT 3 / DOT 4 Motorbike clutch system according to DOT 3 / DOT 4 Also for vehicles with ABS brake system Container type: bottle Content: 250 ml
Content: 0.25 Set (€29.80 / 1 Set)

Ready to ship, estimated delivery time: 1-3 workdays
TRW ST-Allround-organic pads Organic with ceramic-underlayer for heat insulation and solid brake efficiency, good wet brake characteristics. ECE R90 homologation ceramic compound for front and rear brakes optimum brake performance after bedding-in period high resistance to overheating in all conditions good service life and disc friendly unique patented NRS technology eco-friendly, asbestos-free excellent compatability to all aftermarket and OE brake discs multiple test winner and recommended by various motorcycle magazines price per set for one disc

Ready to ship, estimated delivery time: 1-3 workdays
Hydraulic (bleeding) bolts made from high grade aircraft aluminium 7075 T6 Very lightweight. Made from high grade aircraft aluminium. For clutch and brake master and slave cylinder or brake calipers High quality cnc machined. Avaiable in different anodised colors. Thread: M10x1 Length: 20 mm Material: Aluminum 7075 T6 Fits e.g. for : Yamaha XT-660Z brake calipers Ducati 748 - 916 - 996 - 998 - 848 - 1098 - 1198 a lot BREMBO Calipers and brake / clutch pumps