Acerbis aluminium mounting kit for the RALLY BRUSH and RALLY PROFILE handguards.   The delivery includes all necessary parts for the mounting of the mounting kit on 22 and 28mm handlebars. The clamping parts are made of aluminium, this results in a much higher stability than with the plastic mounting kit.   Fits for all Acerbis RALLY BRUSH and RALLY PROFILE handguards

Visually appealing, short mudguard made of plastic. We like to use this mudguard for conversions to a high mudguard on the Yamaha Tenere 700. Also perfect for Super-Moto conversions of the XT-660X and TT600 / XT600 models.   Details: universal Acerbis mudguard, adaptable to many models extremely stable, visually attractive design easy mounting in a few minutes material: plastic, solid-coloured available in: Blue, black, white, red

Acerbis handguards 'Rally Brush' with 22 and 28mm mounting kit The ORIGINAL nylon wrap-around handguard Rally Brush handguards are injection molded out of a strong nylon composite This material is better suited for the weight concerned rider, where a half a pound savings over aluminum is achieved. Top coverage and impact resistance Inner ribs for increased reinforcement Comes equipped with mounting kit to fit 7/8" steel and 7/8" aluminum handlebars ACERBIS · 22 mm + 28.6mm handlebar mounting kit included · Material: Plastic · Colour: black or white · bigger wind deflectors sold seperately - see accessories · Sold as a pair (left + right)

Handguards Acerbis ENDURANCE-X incl. universal mounting kit for 22 and 28 mm handlebars   The Endurance-Xr Rally handguards feature an very strong aluminum bar with spoiler for perfect wind and weather protection. Different colours of the spoiler and the Acerbis Logo make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. This spoiler is visually similar to the Acerbis X-Factor, but somewhat more filigree at the top and on the outside of the handlebars.   Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection.   Closed handguard with aluminum bar and bracelets Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. For its resistance also indicated for use on maxi-enduro.   Impact resistance: 1) Equipped with a 35mm "C" section ANTICORODAL bar. Provides 5 times more resistance than the classic handguard with aluminum bar. 2) The cuffs, oversized with a thickness of 19 mm, guarantee greater strength and increased torsional capacity 3) Expanders made entirely of steel.   Cover: 1) Impact resistant 2) Wide area to protect the pilot's hands more 3) Flexible lower area to absorb accidental contact with the knee.   Brake/clutch levers and pump assemblies Mounting kit included: Mounts to all off road competition bikes (motocross and enduro) with HANDLEBARS SIZE: Inner size from 13.5 -16 mm Outer size from 22 - 28 mm.   Co-molded logo   Material: Polypropylene 16.00% Aluminum 70.00% Steel 14.00%       Fits all: universal

A innovation concerning handguards: Acerbis Multiplo E The Enduro version of the Multiplo handguard is extremely resistent thanks to special hardening treatment used for the aluminum. Due to the curved aluminum bar design, it is possible to make a quick lateral hand release from the grip bar in case of an emergency. Available in various colors.  The changeable, bold on plastic spoilers and the aluminium deflector can be removed easily.  With the in two sizes avaiable plastic spoilers, the handguards are state-of-the-art in design and function. The Enduro version „E“ is special made for the Adventure and Rally use. The handguard can be used with the aluminium insert and the plasic spoilersor only with the aluminium insert. Additional, bigger wind deflectors are sold seperately. See accessories. Including mounting kits for 22 mm and 28 mm handlebars. Fits 22mm and 28mm handlebars (like e.g. Magura or ProTaper). · Closed handguards - the aluminium bar is mounted to the end of the handlebar · due to the curved bar it's possible it is possible to make a quick lateral hand release · Defectors available in various colors · Plastic part can be replaced · Bigger wind deflectors avaiable · including  mounting kit for 22 and 28mm handlebars · black anodised aluminium bars · Sold as a Pair (left+right side) Fits: · universal

ACERBIS Handguards Rally Pro X-STRONG including mounting set for 22 and 28mm handlebars Very strong and sturdy handguards with intergrated aluminium bar for highest strength. Avaiable as a set with or without mounting kit. · extremely sturdy and visually appealing design · Material: Plastic  with reinforced Aluminium inlay · plastic guard with aluminium inlay · easy mounting within minutes · Mounting kit for 22 and 28.6mm handlebars · for handlebar diameter (inner) 13,5mm-19mm · Available in: blue, black, white, red, yellow and orange · Wind deflectors avaiable - see accessories · Sold as a pair for left + right side

Acerbis handguards Rally Profile incl. 22 and 28mm handlebar mounting kit   Acerbis Rally Profile Handguards - Acerbis Adventure and Enduro Handguards. Sturdy handguards made of Polypropylen. The Rally Profile is designed to be lightweight yet still offering excellent protection available. A Nylon composite material injection-molded guard for increased protection and an indexed steel bar-end insert mounts solidly and will not allow guard to rotate in a crash.   Individuial look and a good protection are the main issues of this sturdy handguards. Weather protection for the hands combined with a protection for the brake and clutch lever. A mounting kit for 22 and 28mm aluminium bars is included. Delivered with an universal mounting kit for most bikes. The mount kit includes an wedge anchor which plugs tight into the ends of the handlebar, and keeps handguards from twisting upon impact.   Features:   ACERBIS Handguards 'RALLY PROFILE' Provides strength and durability without excess weight sturdy and visually appealing design Material: Plastic Easy mounting within minutes Mounting kit for 22mm and oversized 28mm handlebars   Included in delivery:   Left and right handguard Mounting kit for 22 and 28mm aluminium bars Sold as a Pair (left+right side)

Handguards Acerbis X-Factor incl. universal mounting kit The X-Factor Rallye Handguards feature an very strong aluminum bar with big spoiler for perfect wind and weather protection. Different colours make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection. Details: · Closed hand guard from Acerbis · very strong aluminium bar · Anticorodal mounting kit to fasten the hand guard to the handlebar · Steel expander for tighter fastening and to oppose torsion in case of impact. · Mounting kit for 22 and 28mm included · big Dual-injection covers · Avaiable in various colour combinations · Sold as a Pair (left+right side) Fits all: · universal

The X-Factory Handguards feature an ultra strong steel bar wrapped with an injection moulded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail / adventure riding or the big adventure as well as for Super-Moto use. We think this is most likely the strongest handguard you can buy.   Facts: Closed hand guard Steel bar covered with plastic in various colours Anticorodal armbands to fasten the hand guard to the handlebar Steel expander for tighter fastening and to oppose torsion in case of impact. Dual-injection covers Avaiable in various colour combinations Mouning kit for 22 and 28 mm bars encluded Sold as a Pair (left+right side)   Fits for: universal

Acerbis exhaust protector made from high temperature resisting silicone.   It is always annoying when a new silencer is immediately scratched the first time it is used off-road. Prevents scratching the silencer when you have a fall over. Also may prevent getting ugly dents.   Details:   Silencer protection against dents and scratches Circumference 200/400 mm Locking system through micrometric closing bands Heat resistant Made from 100% silicone Weight: 110 gr.   Fits:   universal

Replacement Spoiler for Acerbis Multiplo handguards. Easy mounting within minutes only by loosening two screws. Price per pair.  

Spoiler for Rally Pro handguards Good wind- and weather protection - easy mounting · Material: Plastic, black · Price per pair

DUSC Adapter kit for SW-Motech PRO side carrier.   Adapter kit for attaching DUSC side cases to the PRO side carrier from SW-MOTECH   Included in delivery 1 x DUSC Adapter kit for PRO side carrier. Mounting instructions Mounting material   Details Color: black Total Weight: appr. 0,2 kg / appr. 0.3 lb

Driving the XT660s without this anoying and maddening plopping and banging when closing throttle?  Closing the AGR system with a blanket with help you ouit of this mess. Installing is easy - you do not have to remove the cylinder head for this! Works perfecly with aftermarket exhaust systems. Precisly made from laser cutted stainless steel, glas bead blasted. Including also stainless steel bolds. · no banging and popping in exhaust sound! · Works perfectly with aftermarket exhaust systems · perfect for tuned bikes. · Easy to install Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016 · Yamaha MT-03 2005-2008  

Paper air filter in OEM quality. Affordable, high quality filter as a replacement for the stock filter. Very high quality with good air flow. Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016

Paper air filter in OEM quality. Affordable but high quality filter as a replacement for the stock filter. Very high quality with good air flow. Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016

Solid aluminium chain guard for the Yamaha XT660 model range. Made of laser-cut aluminium, silver or black anodised for best surface protection. Quick and easy fitting with the optimum use of existing fixing points. Easy installation and a sporty look. Extreme lightweight. Fits all: · Yamaha XT-660R   2004-2016 · Yamaha XT-660X   2004-2006 Does not fit to the XT-660X 2007-2016 !

Aluminium engine bolt set for Yamaha XT-660R, Yamaha XT-660X and Yamaha XT-660Z/ZA Tenere High quality aluminium engine bolt set for the Yamaha XT-660 models (R / X / Z / ZA). Made of high grade aircraft aluminium with high strength (540 - 600 N/mm²). Very lightweight. Gives your XT660 the unique look! Avaiable in different anodised colors and also as a titanium bolt set! · Avaiable with TCK, TCI and TSS heads · Made in Germany · no cheap, low quality china bolts! The set contains 42 screws for: · Clutch cover · Stator cover · Waterpump · Oil filter cover · Valve cover · Thermo switch · Timing chain tensioner · Starter case · Sprocket cover Fits for: · XT-660R · XT-660X · XT-660ZTenere · XT-660ZA Tenere mit ABS  

Aluminium screws for windshields or side wind deflectors   For fastening fairing windscreens or side wind deflectors. Made from aerospace aluminium. 60% less weight compared to steel. High quality anodised.   Details:   Replacement for original steel or plastic screws Head diameter: 12 mm Thread length 16 mm Price per piece

CNC Aluminium made swing arm end cover Yamaha XT-660R/X The stock swing arm cover on the rear end is not made in a good quality. After using the chain tensioner several times, the plastic coating is flaking and gives them an ugly look.  Also a drive in the wintertime with salt on the street the genuine Yamaha parts gets rusty soon. With the CNC machine milled made swingarm endcaps you will solve the problems and upgrade your bike as well.. Made of high grade aircraft aluminium, precisly manufactured and with a high quality anodisation. Sold as a pair. Last for every, lightweight and with a nice look. Fits: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2006 Doesn't fit XT-660X 2007 onwards

Aluminum nipple set (36 pcs), for HAAN spokes

Andreani Misano EVO Hydraulic front fork Cartridge Kit Yamaha XT-660R   Fully adjustable hydraulic fork cartridge kit  with adjustable compression and rebound for the 43mm Kayaba for Yamaha XT-660R. The XT-660R front fork is, unfortunately, not one of the perfect ones. Especially in faster riding you easily recognize that the damping is on the wrong side. If you wanted to adjust this mess, till now you have to completely overhaul the fork and adjust damping. That is costy and really a lot of work. With this 20 mm piston cartridge kit you can now upgrade your standard 43 mm Kayaba XT-660R fork to a fully adjustable including adjustable spring preload! Adjustable compression and rebound and adjustable spring pre-load. The cartridge is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up.   We offer installation of the Cartridge in your fork here in our workshop. Exchange of all wear parts and oil included included. Please ask for a quote.   Facts:   20 mm Cartridge Kit adjustable compression and rebound adjustable spring preload new fork springs included compression, rebound and spring preload can easiliy changed needed oil not included (Ohlins #7 R/T - 2 liters) See accessories.   Fits all:   Yamaha XT-660R 2004-2016

Andreani Misano EVO Hydraulic front fork Cartridge Kit Yamaha XT-660X   Fully adjustable hydraulic fork cartridge kit  with adjustable compression and rebound for the 43mm Kayaba for Yamaha XT-660X. The XT-660X front fork is, unfortunately, not one of the perfect ones. Especially in faster riding you easily recognize that the damping is on the wrong side. If you wanted to adjust this mess, till now you have to completely overhaul the fork and adjust damping. That is costy and really a lot of work. With this 20 mm piston cartridge kit you can now upgrade your standard 43 mm Kayaba XT-660X fork to a fully adjustable including adjustable spring preload! Adjustable compression and rebound and adjustable spring pre-load. The cartridge is equipped with a sophisticated hydraulic system that ensures the adjustment in compression, extension and preload of the spring, with adjustments placed directly on the upper cap of the cartridge in order to guarantee easy access to the set-up.   We offer installation of the Cartridge in your fork here in our workshop. Exchange of all wear parts and oil included included. Please ask for a quote.   Facts:   20 mm Cartridge Kit 20mm diameter pistons with expanded oil passages adjustable compression and rebound adjustable spring preload new fork springs included compression, rebound and spring preload can easiliy changed needed oil not included (Ohlins #7 R/T - 2 liters) See accessories.   Fits all:   Yamaha XT-660X 2004-2016

Slim and lightweight Yamaha XT-660 exhaust system made by the Italian silencer manufacturer Arrow.   Optically even slimmer than the most exhaust system for the Yamaha XT660. Aggressive style due to the race look and the slim end caps. This silencer system will offer in the middle range (~4000 rp/m) approx. 4 PS more than the standard bike.   Details: muffler made of aluminium (6.6kg) or titanium (5.9kg) stainless steel-connection tubes approx. 5 dB more than the standard equipment, very nice sounding aggressive sound extreme precisely manufactured aggressiv optic style removeable dB-Killer without catalyst street legal for the model DM01 (2004-2006)   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016