Acerbis aluminium mounting kit for the RALLY BRUSH and RALLY PROFILE handguards.   The delivery includes all necessary parts for the mounting of the mounting kit on 22 and 28mm handlebars. The clamping parts are made of aluminium, this results in a much higher stability than with the plastic mounting kit.   Fits for all Acerbis RALLY BRUSH and RALLY PROFILE handguards

Acerbis handguards 'Rally Brush' with 22 and 28mm mounting kit The ORIGINAL nylon wrap-around handguard Rally Brush handguards are injection molded out of a strong nylon composite This material is better suited for the weight concerned rider, where a half a pound savings over aluminum is achieved. Top coverage and impact resistance Inner ribs for increased reinforcement Comes equipped with mounting kit to fit 7/8" steel and 7/8" aluminum handlebars ACERBIS · 22 mm + 28.6mm handlebar mounting kit included · Material: Plastic · Colour: black or white · bigger wind deflectors sold seperately - see accessories · Sold as a pair (left + right)

Handguards Acerbis ENDURANCE-X incl. universal mounting kit for 22 and 28 mm handlebars   The Endurance-Xr Rally handguards feature an very strong aluminum bar with spoiler for perfect wind and weather protection. Different colours of the spoiler and the Acerbis Logo make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. This spoiler is visually similar to the Acerbis X-Factor, but somewhat more filigree at the top and on the outside of the handlebars.   Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection.   Closed handguard with aluminum bar and bracelets Ultra-durable closed handguard designed for those seeking greater protection in the disciplines: enduro, hard enduro and cross country. For its resistance also indicated for use on maxi-enduro.   Impact resistance: 1) Equipped with a 35mm "C" section ANTICORODAL bar. Provides 5 times more resistance than the classic handguard with aluminum bar. 2) The cuffs, oversized with a thickness of 19 mm, guarantee greater strength and increased torsional capacity 3) Expanders made entirely of steel.   Cover: 1) Impact resistant 2) Wide area to protect the pilot's hands more 3) Flexible lower area to absorb accidental contact with the knee.   Brake/clutch levers and pump assemblies Mounting kit included: Mounts to all off road competition bikes (motocross and enduro) with HANDLEBARS SIZE: Inner size from 13.5 -16 mm Outer size from 22 - 28 mm.   Co-molded logo   Material: Polypropylene 16.00% Aluminum 70.00% Steel 14.00%       Fits all: universal

A innovation concerning handguards: Acerbis Multiplo E The Enduro version of the Multiplo handguard is extremely resistent thanks to special hardening treatment used for the aluminum. Due to the curved aluminum bar design, it is possible to make a quick lateral hand release from the grip bar in case of an emergency. Available in various colors.  The changeable, bold on plastic spoilers and the aluminium deflector can be removed easily.  With the in two sizes avaiable plastic spoilers, the handguards are state-of-the-art in design and function. The Enduro version „E“ is special made for the Adventure and Rally use. The handguard can be used with the aluminium insert and the plasic spoilersor only with the aluminium insert. Additional, bigger wind deflectors are sold seperately. See accessories. Including mounting kits for 22 mm and 28 mm handlebars. Fits 22mm and 28mm handlebars (like e.g. Magura or ProTaper). · Closed handguards - the aluminium bar is mounted to the end of the handlebar · due to the curved bar it's possible it is possible to make a quick lateral hand release · Defectors available in various colors · Plastic part can be replaced · Bigger wind deflectors avaiable · including  mounting kit for 22 and 28mm handlebars · black anodised aluminium bars · Sold as a Pair (left+right side) Fits: · universal

ACERBIS Handguards Rally Pro X-STRONG including mounting set for 22 and 28mm handlebars Very strong and sturdy handguards with intergrated aluminium bar for highest strength. Avaiable as a set with or without mounting kit. · extremely sturdy and visually appealing design · Material: Plastic  with reinforced Aluminium inlay · plastic guard with aluminium inlay · easy mounting within minutes · Mounting kit for 22 and 28.6mm handlebars · for handlebar diameter (inner) 13,5mm-19mm · Available in: blue, black, white, red, yellow and orange · Wind deflectors avaiable - see accessories · Sold as a pair for left + right side

Acerbis handguards Rally Profile incl. 22 and 28mm handlebar mounting kit   Acerbis Rally Profile Handguards - Acerbis Adventure and Enduro Handguards. Sturdy handguards made of Polypropylen. The Rally Profile is designed to be lightweight yet still offering excellent protection available. A Nylon composite material injection-molded guard for increased protection and an indexed steel bar-end insert mounts solidly and will not allow guard to rotate in a crash.   Individuial look and a good protection are the main issues of this sturdy handguards. Weather protection for the hands combined with a protection for the brake and clutch lever. A mounting kit for 22 and 28mm aluminium bars is included. Delivered with an universal mounting kit for most bikes. The mount kit includes an wedge anchor which plugs tight into the ends of the handlebar, and keeps handguards from twisting upon impact.   Features:   ACERBIS Handguards 'RALLY PROFILE' Provides strength and durability without excess weight sturdy and visually appealing design Material: Plastic Easy mounting within minutes Mounting kit for 22mm and oversized 28mm handlebars   Included in delivery:   Left and right handguard Mounting kit for 22 and 28mm aluminium bars Sold as a Pair (left+right side)

Handguards Acerbis X-Factor incl. universal mounting kit The X-Factor Rallye Handguards feature an very strong aluminum bar with big spoiler for perfect wind and weather protection. Different colours make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection. Details: · Closed hand guard from Acerbis · very strong aluminium bar · Anticorodal mounting kit to fasten the hand guard to the handlebar · Steel expander for tighter fastening and to oppose torsion in case of impact. · Mounting kit for 22 and 28mm included · big Dual-injection covers · Avaiable in various colour combinations · Sold as a Pair (left+right side) Fits all: · universal

The X-Factory Handguards feature an ultra strong steel bar wrapped with an injection moulded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail / adventure riding or the big adventure as well as for Super-Moto use. We think this is most likely the strongest handguard you can buy.   Facts: Closed hand guard Steel bar covered with plastic in various colours Anticorodal armbands to fasten the hand guard to the handlebar Steel expander for tighter fastening and to oppose torsion in case of impact. Dual-injection covers Avaiable in various colour combinations Mouning kit for 22 and 28 mm bars encluded Sold as a Pair (left+right side)   Fits for: universal

Acerbis exhaust protector made from high temperature resisting silicone.   It is always annoying when a new silencer is immediately scratched the first time it is used off-road. Prevents scratching the silencer when you have a fall over. Also may prevent getting ugly dents.   Details:   Silencer protection against dents and scratches Circumference 200/400 mm Locking system through micrometric closing bands Heat resistant Made from 100% silicone Weight: 110 gr.   Fits:   universal

Replacement Spoiler for Acerbis Multiplo handguards. Easy mounting within minutes only by loosening two screws. Price per pair.  

Spoiler for Rally Pro handguards Good wind- and weather protection - easy mounting · Material: Plastic, black · Price per pair

Barkbuster Bar End Insert Kit. To be used with the Barkbuster handguard kits. · Avaiable for different inner bar diameters · Made from Steel and aluminium · sold as a pair

Barkbuster Skid plates. To be used with the Barkbuster handguard kits · VPS Skid Plate (set of 2) · Fit in conjunction with VPS / Jet plastic guards on a Barkbusters backbone · Protects the outer edge of the aluminium backbone · Adds a stylish finish to the handguard · Available in Black only.

Barkbusters Spare Wind Deflector Set for VPS spoilers · Spare Wind Deflector Set · Left and right pair with mounting screws · Wind deflectors can be fitted in two positions for variable wind protection · High impact resistant plastic · Available in Black or White. · Sold as a pair (left / right)

Barkbuster STORM plastic guards. To be used with the Barkbuster handguard kit · STROM plastic guards only · Left and right pair with mounting screws. · Can be fitted to Barkbusters aluminium backbones (except EGO backbone). · Designed for excellent wind and cold weather protection · High impact resistant plastic guards. · Avaiable in black or white

Barkbuster VPS plastic guards. To be used with the Barkbuster handguard kits   VPS plastic guards only (with variable height wind deflector set). Left and right pair with mounting screws. Can be fitted to Barkbusters aluminium backbones (except EGO backbone). Wind deflectors can be fitted in two positions for variable wind protection. Deflectors can be removed in minutes for a more compact feel. High impact resistant plastic guards. Extensive range of colours matched to popular motorcycles models. Skid Plate available for added style and protection to the outer edge of the Barkbusters backbone . NOTE: New Colour “Black on Black” supplied as, Black VPS Guard with Black Barkbusters Logo and Black Wind Deflector.

Replacement brake lever for the Yamaha XT660R and Yamaha XT660X in a very good OEM quality. · Material: Aluminium · Color: black Fits all: · Yamaha XT-660r 2004-2016 · Yamaha XT-660X 2004-2016  

Adjustable Clutch and Brake Levers Yamaha XT-660R and XT-660X models.   Fully CNC Machined of 6061-T6 billet aluminum to precise tolerances. Both clutch and brake levers are fully adjustable fasteners and cadmium plated custom made springs. Our levers even come in a variety of colors to match your XT660R or XTX-660 Super-Moto. Just remove your old levers, and re-insert the new ones Adjustable in 6 positions. Made from billet aluminium. This is the lever for your XT660!   All levers have a small inset 1-1/4 inches from the end of the lever to provide a break-away point in a garage tip-over or otherwise. They are avaiable in black, blue, red, silver and gold anodised. The small adjuster tips are avaiable in blue, red, black and silver, gold Due to the many possible colour combinations, the lever sets are always produced to order. Therefore, please allow for a (seasonal) delivery time of about 1-3 working days until dispatch. If you like a colour combination that is not listed, please ask.   Details: CNC-machined from solid aluminum high grade air craft aluminium Pre-defined breakage-notch for additional safety. Adjustable in 6 positions avaible in different colors with TÜV certificate / Street legal   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

Replacement clutch lever for the Yamaha XT660R and Yamaha XT660X in a very good OEM quality.   Details: OEM shape and length Material: Aluminium Color: black   Fits all: Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

Precisely CNC machined handlebar clamp set for 22mm (7/8") standard or 28mm (1-1/8") handlebars like e.g. Magura, Answer or Pro Taper for the Yamaha XT-660R and XT-660X model range. Special set made with the needed height and all mounting parts for the XTR660 and XTX660 . We manufacture this clamps on modern cnc machines here in our own production. Made in Germany!   The fully cnc machined clamping sets have a height of 20mm (bottom of clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. The shown complete height is measured between the lower side of the handlebar and the upper side of the triple clamps.   The listed heights are the height compared to the stock handlebar clamp height. Measured in mm between the lower end of the handlebar and the upper side of the triple clamps. So +20 mm means that the new clamps are +20 mm compared to the stock clamps. If the listed height is not enough for your needs, you can combina the clamps with the spacers shown in the 'accessories' section. Mounting heights up to +30mm compared to OEM height is quite easy, all height more than +30mm might require longer cable and wires. See accessories.   M10 bolts used for mounting to the triple clamp. Delivered bolts are 40 mm longer than height of ordered clamps. If you have choosen a height of e.g. 50 mm, the included bolts are 90 mm long. If you need different bolt length, see accessories tab. For individually needed distance bushings see accessories.   Material: aircraft aluminium 7075 T6 Color: silver or black anodised Price per pair Delivery including fiiting M10 bolts Made by OTR with 10 years warranty!   Fits all:   Yamaha XT-660R 2004-2016 Yamaha XT-660X 2004-2016

Off-centered handlebar mounting set for 22 mm handlebars   The excentric manufacturing offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The fully cnc machined clamping sets have a height of  30 mm (upper side of triple clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. So if you need a total height of e.g. 50 mm, choose the handlebar clamp (30 mm height) and add a 20 mm distance bushing.   Made of high grade aircraft aluminium, black or silver anodised. For needed distance bushings see accessories. Shown bushings not included!   Supplied M10 bolts have a free length  of 40 mm. If you have e.g. a 40 mm high triple clamp, these bolts will fit. If you need longer/shorter bolts, please order separately (see accessories).   Fits e.g. Yamaha XT-660R/X, XT-660Z Tenere, TT-600 (S/E/R/RE), XT-600, XT-550, XTz-660 any many more bikes with a bolt-on clamp set and 22 mm handlebar Please measure the needed height on your bike.   Tested, maximum possible heights with stock cables and wires:   Yamaha Tenere 700            -   90 mm Yamaha XT-660Z Tenere   -   70 mm Yamaha XTz-660                 -   70 mm Yamaha XT-660R/X            -   50 mm Yamaha TT-600                   -   50 mm Yamaha XT-600                   -   50 mm Yamaha XT-550                   -   50 mm   Color: silver or black anodised Price per pair Made in Germany by OTR with 10 years warranty! Shown spacers not included in delivery

Off-centered handlebar mounting set for 28 mm (1/1/8") handlebars like e.g. Magura, Renthal Pro Taper.   The excentric manufacturing offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The fully cnc machined clamping sets have a height of  30 mm (upper side of triple clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. So if you need a total height of e.g. 50mm, choose the handlebar clamp (30 mm height) and add a 20 mm distance bushing.   Made of high grade aircraft aluminium, black or silver anodised. For needed distance bushings see accessories. Shown bushings not included!   Supplied M10 bolts have a free length  of 40 mm. If you have e.g. a 40 mm high triple clamp, these bolts will fit. If you need longer/shorter bolts, please order separately (see accessories).   Fits e.g. Yamaha Tenere 700 or also, with new 28.6mm handlebar, Yamaha XT-660R/X, XT-660Z Tenere, TT-600 (S/E/R/RE), XT-600, XT-550, XTz-660 any many more bikes with a bolt-on clamp set. Please measure the needed height on your bike.   Tested, maximum possible heights with stock cables and wires:   Yamaha Tenere 700            -   90 mm Yamaha XT-660Z Tenere   -   70 mm Yamaha XTz-660                 -   70 mm Yamaha XT-660R/X            -   50 mm Yamaha TT-600                   -   50 mm Yamaha XT-600                   -   50 mm Yamaha XT-550                   -   50 mm   Color: silver or black anodised Price per pair Made in Germany by OTR with 10 years warranty! Shown spacers not included in delivery

Precisely CNC machined and extreme strong RAID handlebar clamp set for 28 mm handlebars   The upper handlebar clamping plate provides a high torsional stiffness of the complete set. The handlebar height can be individually varied with additional spacers. The handlebar clamps are made eccentrically. This makes it possible to move the handlebar position forward or backward by 5 mm compared to the original.   We manufacture this clamps on modern cnc machines here in our own production. The clamps are made with an off-set, so it is possible to adjust handlebar posiotn 5mm to- or backward from rider. The avaiable versions are the height compared to the stock handlebar clamp height. Measured in mm between the lower end of the handlebar and the top of the triple clamps.   If the listed height is not enough for your needs, you can add additonal spacers shown in the 'accessories' section. New bolts are needed as well. OEM brake lines and clutch cables work up to a height 30mm more than stock.   Details:   made from aircraft aluminium 7075 T6 high torsional stiffness handlebar position can be changed +/- 5 mm hight can be adjusted individually color: silver or black anodised additional spacer to lower or rise avaiable. See accessories Made in Germany by OTR 10 years warranty sold as a set   Fits all:   universal

Foam rubber to avoid blisters on long endurance rides. This are the best foam grips we have found. For long distance and multi-day events, rally helps to keep things comfortable. Thicker material for more comfort. On the desert races this are still the grateset grips. Their thickness is studied to cancel most of vibrations that you can find in rally races. With the Foam Rally Grips you have ultimate grip and maximum comfort. The foam absorbs a large part of the vibrations from the handlebars and provides high friction! The grips are produced with an open end so you can perfectly combine the grips with your hand guards!   Price per pair Color: black Measurements: Ø 22 mm (left) ; 25 mm right side Length: 125 mm