KRIEGA OS-BASE KTM 1050, 1090, 1190 ADVENTURE & 1290 SUPER ADVENTURE

The OS-BASE is an 'over the seat harness' which allows OS-6, OS-12 or OS-18 ADVENTURE PACKS to be mounted as soft panniers. No additional frames are required, this system provides a super-tough, lightweight carrying solution for the KTM 1050, 1090, 1190 & 1290 with no drilling or permanent bodywork alterations to the bike.

 

The modular design enables you to modify your luggage set-up to suit your ride - from a day's single track to longer moto-camping adventure trips.

 

The KTM RACK LOOPS included, attach to the bike's baggage carrier / rear rack and provide 4 optional hook-on points. Used in conjunction with the additional loops on the OS-BASE they provide various mounting points for a 3 or more bag set-up, or can be used to mount an OS-PACK as a stand alone tail pack without the OS-BASE.

 

The set length straps make mounting a breeze and the purpose designed main body shape provides a tight, secure fit with plenty of distance from the exhaust. It takes less than a minute to mount the system to the bike and just seconds to remove it.

 

PLEASE NOTE: To fit the OS-Base will require the removal of the passenger grips

 

Suggestions for fitting OS-ADVENTURE PACKS

DAY RIDES 2 x OS-6 to carry 12 litres of tools and spares to take on every ride.

SHORT TRIPS 2 x OS-12 for a total of 24 litres of weekend essentials.

LONGER ADVENTURES Fit up to 3 x OS-18 for the option of 54 litres of carrying capacity.

 

Kriega 100% waterproof OS-ADVENTURE PACKS are supremely adaptable. Mix and match the sizes and fit two or three packs to this OS-BASE, depending on the carrying capacity you require. Use the SUBFRAME LOOPS included to mount a single OS-ADVENTURE PACK on the seat, without the OS-BASE, for the shortest trips.

 

 

 

Weight: OS-BASE + Mounting kit 800 Gr. / 1.7 lb

 

Product Code: KOSBA-A

 

BODYWORK DAMAGE DISCLAIMER

Even though most of the OS-BASE mounts on the seat, the sides can rub against the plastic side panels of the bike, resulting in minor abrasion. This can be further exaggerated if mud and dust get in between the OS-BASE and the plastics. We strongly recommend applying a clear adhesive protective sheet to where abrasion may occur on your motorcycle.