Handlebar clamps for 22 / 28mm handlebars Yamaha XT-660Z/ZA Tenere
€79.95
Available, delivery time: 1-3 days
Handlebar clamps for 22 / 28mm handlebars Yamaha XT-660Z/ZA Tenere
Precisely CNC machined handlebar clamp set for 22 mm (7/8") standard or 28 mm (1-1/8") handlebars like e.g. Magura, Answer or ProTaperfor the Yamaha XT-660Z and XT-660ZA (ABS) model range.
Special set made with the needed height and all mounting parts for the XT660Z and XT660ZA .
We manufacture this clamps on modern cnc machines here in our own production. Made in Germany!
The fully cnc machined clamping sets have a height of 20mm (bottom of clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible.
The shown complete height is measured between the lower side of the handlebar and the upper side of the triple clamps.
The dropdown menue shows the height you will get compared to the oem handlebar height. This is measured between the lower end of the handlebar and the upper side of the triple clamps.
So +20 mm means that the handlebar position will be +20 mm compared to the oem height. If you want to have oem height, choose +0 mm.
If the listed height is not enough for your needs, you can add extra height with the spacers shown in the 'accessories' section. New bolts needed, see accessries.
Mounting heights up to +30mm compared to OEM height is quite easy, all height more than +30mm might require longer cable and wires. See accessories.
M10 bolts used for mounting to the triple clamp.
Delivered bolts are 40 mm longer than height of ordered clamps. If you have choosen a height of e.g. 50 mm, the included bolts are 90 mm long.
If you need different bolt length, see accessories tab.
For individually needed distance bushings see accessories.
Details:
- Material: aircraft aluminium 7075 T6
- Color: silver or black anodised
- Price per pair
- Delivery including fiiting M10 bolts
- Made by OTR with 10 years warranty!
Fits all:
- Yamaha XT-660Z Tenere 2010-2016
- Yamaha XT-6660ZA ABS Tenere 2011-2016
OFF-THE-ROAD - OTR-Performance GmbH
Hugo-Junkers-Str. 52-54
50739 Köln, Deutschland
info@off-the-road.de
Accessories
Available, delivery time: 1-3 days
Distance bushing in various heights for our cnc machined handlebar clamps. The fully cnc machined bushing is avaible from 10-50mm height. By using this spacer in combination with our handlebar clamps almost all heights are possible. Made of high grade aircraft aluminium, black or silver anodised. Delivered without bolts. For bolts see accessories. To be used only with our cnc machined handlebar clamps or triple clamp sets. See accessories. Price per piece. For mounting two pieces needed.
Available, delivery time: 1-3 days
M10 bolt in DIN6912 version, galvanised. Suitable for our 76-E5 handlebar clamp sets. Length of the bolt corresponds to dimension L in the drawing. Price per piece.
Available, delivery time: 1-3 days
High quality throttle cable in an extended version (+40mm). For all Yamaha XT660 with handlebar risers more than 30mm and/or additional higher handlebars. We use this prolonged throttle cables e.g. for our Rally raid bikes! Sold as a pair (opener ond closer cable). Perfect in combination with our extended brake hose or clutch cable (see accessoiries). Fits all: · Yamaha XT-660R · Yamaha XT660X · Yamaha XT660Z Tenere · Yamaha XT660ZA Tenere
Available, delivery time: 1-3 days
The Number 1 in Germany among the "standard" aluminium 22mm off-road handlebars. And not only as a result of the first-class manufacturing and the top finish, but also because of the included TÜV-Certificate. Sutable for a lot of Off-road, Adventure and Super-Moto bikes. Available in four colours and three heights Very high strength due to the thick aluminium (5mm) 22 mm clamping diameter 14 mm inner diameter Bolted cross-bar Colours: blue, silver, black and titan anodised Street legal - with TUV approval Height: low, middle-high and high