Ohlins Cartridge Kit Yamaha Tenere 700 Rally 2025 on / Extreme / World Raid

Ohlins front fork springs 08424 - developed for the use in Ohlins cartidge kits   The coiling of this springs for the NIX / FKA cartridge kits is linear, that means that the the spring has the same Nm over the complete travel. The Öhlins fork springs are characterised by a precise linear design.   Both the range and the extensive test programme using a computer-operated test-bench which simulates the hardest driving situations guarantee that, in combination with the series spring elements, you are driving the optimal solution for your bike! This fork springs are manufactured from the highest grade Chrome Silicone wire, each spring is cold coiled, heat treated, pre set and ground to length before being polished for ultimate performance. All springs have their rate laser etched on the end and are manufactured to DIN 2095 grade.   Please check if the choosen springs and spring rate will fit your cartridge type / motorcycle.   Ohlins part no: 08438 Length: 470 mm Oil recommendation: 01309 Scope of Delivery:  1 Set Forks springs   Fits for:   Ohlins NIX / FKA Cartridges like e.g. Yamaha Tenere 700 World Raid, World Rally or Extreme

Fork dust cap/oil seal SKF Yamaha Tenere 700, black   SKF, the leading global supplier of seals for automotive and motorcycle applications, has launched a new series of seals for motorcycle forks. Their extensive experience in the area of shock absorber seals has lead to a new seal that will enhance the enjoyment of your ride. Even though operating pressures and temperatures in motorcycles are moderate when compared to a car or truck, there are some specific factors to be considered. Enduro or Adventure bike forks are the most demanding applications due to a long stroke, high speed and contaminated operating conditions. In addition, there are special dust protection requirements due to the exposed position of the fork and the absence of protective bellows. In these applications the rider is in direct contact with the front suspension via the handlebars. Therefore, the smoothness of fork movement is vital, as it has a considerable impact on steering behavior. SKF seal kits for motorcycle forks consist of an oil seal and a wiper seal developed to achieve superior sealing performance without stiction. As a result of SKF’s extensive experience in the design and material development of seals for suspension systems, SKF has developed a new self-lubricating compound. The design and performance characteristics of the seals made from this compound enable them to keep oil in and contaminants out of the fork, while virtually eliminating stiction and improving performance by reducing friction.   The oil and wiper seals, which are made from a new self-lubricating compound, have been specially designed to provide the following benefits:   black version (technically identical to the green version) less friction (approx. -20%) compared to conventional sealing rings use of a self-lubricating material increase seal life and performance enhance water and dirt protection capability and withstand UV light maintain low and constant friction in operation reduce wear and air suction   Note: Each SKF seal kit includes 1 oil seal + 1 dust seal. To rebuild both forks you need to order 2 seal kits. Black and green seals are technical the same, only the colour is different.   Fits for all :   Yamaha Tenere ab 2019 onwards Yamaha Tenere 700 Rally 2020 onwards Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards   Our Tip: Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray.

Professional and durable workshop tool for professional and easy installation of springs and bleeding of the cartridge.   Suitable, for example, for all Tenere 700 Kayaba forks, Ohlins, Andreani and Tractice Catridiges Perfect for all who want to perform a fork revision or installation of a new cartridge itself.     Four thread sizes in one tool: M10 x 1.0, M10 x 1.25, M12 x 1.0, M12 x 1.25 Tool design allows for effortless retrieval of damping rod after spring installation Rod includes downward-facing bleed port to prevent oil splatter Perfect for working on Kayaba, Showa and various USD forks One-piece design means no lost parts Laser engraved markings Material: high-grade Aluminum 7075, anodised

Professional and durable workshop tool for professional and easy remove or install OEM and Ohlins cartridge from the fork legs. Suitable, e.g. for a lot Yamaha Kayaba forks like Tenere 700 and XT1200Z. Also e.g. Ohlins FKA 106, FKA 114 and FKA 116 cartridges. Perfect for all who want to perform a fork revision or installation of a new cartridge itself. Material: aluminium 7075 T6, for best surface protection anodised.

Professional seal driver for 43mm diameter forks.Innovative design makes tool easier and safer to use than old fashioned pin aligned drivers.Anodized aluminum locking ring features knurled finish for secure no-slip grip and positively locks body halves together during use. No more worrying about part of the tool falling off and damaging the fork leg or hitting your feet.Perfectly weighted to drive seals. Body halves are machined from durable carbon steel and feature high quality protective black e-coat with laser engraved markings Tool can be splitted, so perfect for use on Up-Side-Down forks like Tenere 700. Fits all e.g. Yamaha Tenere 700 - XT660R - XT660X - XT660Z/ZA Tenere - XT1200Z/ZE - MT-03 and other bikes with 43mm tubes. Price per piece.

Ohlins High Performance Fork Oil R&T 01309-01   Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside down forks. The different viscosities available make it possible to select the most suitable oil.   What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved.   Viscosity: R&T - 01309-01: Viscosity of 19.0 centistokes at 40° Celsius   Content: 1 Liter

Complete set with oil seals and dust caps   These should be replaced at least every 2 years, depending on the riding performance, to ensure a perfect response of the fork. Due to aging or dirt on the fork tubes tubes, fork oil seals can be damaged. The result is a fork oil leakage at the damaged sealing rings. Leaking fork oil is very dangerous and should be avoided in time. Leaking fork oil attacks plastic, metal and painted surfaces, reduces a safe braking process when in contact with brake parts and causes unsafe grip losses on tires. For quality reasons, we only offer high quality shaft seals and dust caps with 3-fold sealing lip.   better breakaway torque and up to 3x less friction than OE Simmerrings patented Max-Life manufacture, which increases the life span by 3-4 times fork seals have 3 sealing lips dust caps are coated with a special grease to improve the response   Scope of delivery: 2 x Dust Cap 2 x Oil Seal   Our Tip: Use only for your bike recommended fork oil and mount the seals with a little grease on the sealing lip. Clean the fork tube with chrome polish before mounting new seals. If the fork tubes is damaged with pitting (uneven surface) replace it. An uneven surface may damage the seals quick. Clean fork tubes regularly and grease with Teflon spray.   Fits for all:   Yamaha Tenere ab 2019 - 2024 Yamaha Tenere 700 Rally 2020 - 2024 Yamaha Tenere 700 World Raid 2022 onwards Yamaha Tenere 700 World Rally 2023 onwards Yamaha Tenere 700 Extreme 2023 onwards Yamaha Tenere 700 Explore 2023 onwards