Cobrra Nemo2 Manuel Chain Lubrication System The biggest drawback of riding a chain-driven motorcycle is chain maintenance. A lot big bikes like Yamaha XT1200 Super Tenere have maintenance free driveshafts. With full disclosure, most of us admit to be terrible at chain maintenance. Most of us don’t clean nor lubricate the chain on our bikes enough. As a result, over the years too many of the chains have seen premature deaths due to our negligence. Not anymore. Thanks to the Nemo 2 automatic chain lubrication system by Cobrra, you can rest easy and truly ride free. With just a simple quarter twist of the dial on my Nemo 2, you send oil directly to the chain when it needs it. You can do this every 200-300km depending on riding conditions. You decide, not an electronic or a "dump" vacuum driven system. Just twist more frequently in dirt or wet weather, and less frequently on well paved roads. Even more, the Nemo 2 is clean and convenient. Unlike most chain oilers that are either gravity or electronically fed, Nemo 2 uses a pressurized system. The twist of the reservoir dial puts pressure in the line which forces the oil to the chain for several minutes. Then it stops. No greasy oily mess and a perfectly happy and lubricated chain. The Nemo 2 is designed by the braniacs (and riders) at Cobrra - a small company dedicated to designing and manufacturing quality products. Anyone who isn’t consistent with their chain lubrication (and that’s most everybody) should get their hands on a Cobrra Nemo 2. Some call it the "best chain oiler avaiable". With the Nemo there’s no requirement to run a vacuum tube from the carb or fuel injectors to the reservoir, and there’s no complicated electrical connections.  The Nemo 2 is designed by the braniacs (and riders) at Cobrra in Slovakia-a small company dedicated to designing and manufacturing quality products. Anyone who isn’t consistent with their chain lubrication (and that’s most everybody) should get their hands on a Cobrra Nemo 2. Some call it the "best damn chain oiler". Instead the Nemo works with a simple twist of the upper reservoir - a 1/4 turn delivers a measured amount of lube to the chain for the next 3 minutes.  The lube gets deposited in front of the rear sprocket, then it self-distributes onto the rollers, side plates, and sprocket teeth.  Your chain and sprockets will last longer when they’re properly lubed. The Nemo is small enough to fit in your hand.  Don’t let the size fool you, it’ll keep the chain lubed for a long, long time.  Refilling is quick and easy.  Nemo holds about 30ml of chain lube which is enough for a weekend ride (or in our case a 5-day ride in the hills).  When the reservoir is empty, simply unscrew the cap and fill it up, then tighten the cap and you’re ready to roll (and lube).  All components are precision billet aluminum with a black anodized finish. The fit and finish are superb. Mounted on the motorcycle it looks like an OEM part. You can mount the Nemo anywhere on the bike. Nemo literature shows it mounted on the handlebars… But for adventure bikes we liked mounting it down low. In that position we were able to reach down and give the chain a quick lube after we rode thru a creek crossing or mud puddle. Specifications: · Weight: 150 gr (empty) · Dimensions: 5,5cm wide x 5,5cm high (not including bracket) · Mounting bracket: 1,5cm x 2,5cm flat tab with 6mm hole · Oil hose: 4mm OD, approx. 250cm long (enough for a spare) · Oil capacity: 30cc · Oiling sequences before empty: Approx. 15 · Oiling time: Approx. 3 minutes per 1/4 turn of the cap  

Cush drive rubber Yamaha XT-660 Increased clearance in the rear hub of the XT-660 is not unchangeable. The cushion dampers, which are built in in the rear wheel hub, should periodically be checked and changed if necessary. The bike will run much smoother with new chusion dampers. Sold as a set with 4 pieces. Fits e.g. all: · Yamaha XT-660R · Yamaha XT-660X · Yamaha XT-660Z Tenere · Yamaha XT-660ZA (ABS) Tenere · Yamaha MT-03

DID 520 VX3 chain with X-ring technology with matching link. The VX3 chain is the improved version of the VX2 chain   The DID 520 VX3 chain is perfect match for your dual sport, sport bike or sport touring bike. DID has created this chain to stand up to the severe demands of today’s motorcycles. New "Direct Energy Transfer" gives you amazing throttle response due to D.I.D. State-of-the-art technology to increase the chain's rigidity. The VX3 X-ring chains are the best choice for the most purpose and demanding applications. Among other characteristics, the VX3 chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and black outer and inner plates.   Longer Chain Life - the 520VX3 has a greatly improved seal performance due to increased X-Ring retention and durability. The DID 520VX3 chain has an outstanding strength of 3720kg and is stronger than the former 520VX3 chain!   Front and  rear sprockets in 520 pitch are required to use this chain.   Tech specs   gold color outer plates steel color inner plates Upgraded chain from the DID 520 VX2 chain. New "Direct Energy Transfer" gives you amazing throttle response due to D.I.D. State-of-the-art technology to increase the chain's rigidity 520VX3 chain will fit a wider range of motorcycles Longer Chain Life - the 520VX3 has a greatly imrpoved seal performance due to increased X-Ring retention and durability   We offer this chains in a endless or open chain version with an Master link as clip- or rivet-link version. Avaiable colours are steel color or gold / black

DID 520 VX3 chain with X-ring technology with matching link. The VX3 chain is the improved version of the VX2 chain   The DID 520 VX3 chain is perfect match for your dual sport, sport bike or sport touring bike. DID has created this chain to stand up to the severe demands of today’s motorcycles. New "Direct Energy Transfer" gives you amazing throttle response due to D.I.D. State-of-the-art technology to increase the chain's rigidity. The VX3 X-ring chains are the best choice for the most purpose and demanding applications. Among other characteristics, the VX3 chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and black outer and inner plates.   Longer Chain Life - the 520VX3 has a greatly improved seal performance due to increased X-Ring retention and durability. The DID 520VX3 chain has an outstanding strength of 3720kg and is stronger than the former 520VX3 chain!   Front and  rear sprockets in 520 pitch are required to use this chain.   Tech specs   steel color outer and inner plates Upgraded chain from the DID 520 VX2 chain. New "Direct Energy Transfer" gives you amazing throttle response due to D.I.D. State-of-the-art technology to increase the chain's rigidity 520VX3 chain will fit a wider range of motorcycles Longer Chain Life - the 520VX3 has a greatly imrpoved seal performance due to increased X-Ring retention and durability   We offer this chains in a endless or open chain version with an replacement clip- or rivet-link. Avaiable colours are steel color or gold / black

Mid-priced, but high quality D.I.D. 520 VX3 chain kit for Yamaha TT-600R and TT-600S models. The reinforced X-ring chains are made by DID, the sprockets are high-end products Made in Germany! The used chains DID 520 VX3 chains have very good strength of about 3720kg, so they are about 20% stronger than any standart 520 chains! Avaiable in different gearings. The stock gearing of the TT-600 15/44 teeth. We offer this chain kits in a closed chain version or an open chain version version with spring clip link. A rivet link is avaiable as spare. See accessories. Delivery: Front sprocket, rear sprocket,DID 520 VX3 chain and spring clip link. Fits all: · Yamaha TT600R 1998-2005 · Yamaha TT600S 1993-1999

Mid-priced, but high quality D.I.D. 520 VX3 chain kit for Yamaha TT-600RE and TT-600E models. The reinforced X-ring chains are made by DID, the sprockets are high-end products Made in Germany! The used chains DID 520 VX3 chains have very good strength of about 3720kg, so they are about 20% stronger than any standart 520 chains! Avaiable in different gearings. The stock gearing of the TT-600 15/44 teeth. We offer this chain kits in a closed chain version or an open chain version version with spring clip link. A rivet link is avaiable as spare. See accessories. Delivery: Front sprocket, rear sprocket,DID 520 VX3 chain and spring clip link. Fits all: · Yamaha TT600RE 1999-2005 · Yamaha TT600E    1993-1999

Strong D.I.D 525 VX3 X-Ring chain, gold color (G&B)   DID's 525 VX3 chains are the best choice for the most severe and demanding applications. Among other characteristics, the VX3 chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and ultra strong outer plates. The offered chain DID 525 VX3 has an outstanding strength of about 4519 kg, so it is about 20% stronger than the standart 525 chains! The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain.   We offer this chain in a closed (endless) or open chain version (open) with Hollow-Rivet or Clip link. The Chain is suitable for on- and off-road use. To be used with 525 front and rear sprockets only.   Brand: DID Typ: VX3 Pitch: 525 (5/8 x 5/16) Colour: gold Tensile strength: 4519 Kg (45,1 KN) Wear reistance: 4000 Chain type: endless, with Clip- or hollow-rivet link   FAQ: What is the difference between the STEEL version (metal color inner and outer plates) and the GOLD&BLACK (gold outer plates, metal color inside) chains? The GOLD plated chains are not only an aesthetic point. Due to an additional heat treating and finishing process, the outside of the chain is more durable against elements like rain, dirt, salt. So the chain doesn not only look better, it also lasts longer and is more durable.

Strong D.I.D 525 VX3 X-Ring chain, steel colour   DID's VX3 chains are the best choice for the most severe and demanding applications. Among other characteristics, the VX3 chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and ultra strong outer plates. The offered chain DID 525 VX3 has an outstanding strength of about 4519 kg, so it is about 20% stronger than the standart 525 chains! The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain.   We offer this chain in a closed (endless) or open chain version (open) with Hollow-Rivet-link. The Chain is suitable for on- and off-road use. To be used with 525 front and rear sprockets only.   Brand: DID Typ: VX3 Pitch: 525 (5/8 x 5/16) Colour: steel Tensile strength: 4519 Kg (45,1 KN) Wear reistance: 4000 Chain type: endless or hollow-rivet link   FAQ: What is the difference between the STEEL version (metal color inner and outer plates) and the Gold & Gold (gold plates, gold inside) chains? The GOLD plated chains are not only an aesthetic point. Due to an additional heat treating and finishing process, the outside of the chain is more durable against elements like rain, dirt, salt. So the chain doesn not only look better, it also lasts longer and is more durable.

Ultra strong and high milage D.I.D 525 ZVM-X X-Ring chain (5/8 x 5/16), gold colour   ZVMX chains are the best choice for the most severe and demanding applications. Among other characteristics, the ZVMX chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and ultra strong outer plates. The used chain DID 525ZVMX has an outstanding strength of about 4750kg, so it is about 30% stronger than the standart 525 chains! The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain.   We offer this chain in a closed (endless) or open chain version (open) with Hollow-Rivet-link. The Chain is suitable for on- and off-road use. To be used with 525 sprockets only.     Brand: DID Typ: ZVM-X Pitch: 525 (5/8 x 5/16) Colour: gold (G&G) Tensile strength: 4720 Kg (46,3 KN) Wear reistance: 4000 Chain type: endless or hollow-rivet link   FAQ: What is the difference between the STEEL version (black inner and outer plates) and the Black&Black (Bk&Bk), the Gold & Gold (gold plates, gold inside) or Silver&Silver (silver inner and outer plates) chains? The GOLD, BALCK or SILVER plated chains are not only an aesthetic point. Due to an additional heat treating and finishing process, the outside of the chain is more durable against elements like rain, dirt, salt. So the chain doesn not only look better, it also lasts longer and is more durable.

Ultra strong and high milage D.I.D 525 ZVM-X2 X-Ring chain (5/8 x 5/16), steel colour   ZVMX chains are the best choice for the most severe and demanding applications. Among other characteristics, the ZVMX chains feature high alloy steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and ultra strong outer plates. The used chain DID 525ZVMX has an outstanding strength of about 4750kg, so it is about 30% stronger than the standart 525 chains! The X-Ring’s four contact points greatly increase its sealing performance. This keeps the dirt out and the lubrication in much better than any other O-Ring. X-Rings have the greatest wear resistance of any other type of O-Ring or Non-O-Ring chain.   We offer this chain in a closed (endless) or open chain version (open) with Hollow-Rivet-link. The Chain is suitable for on- and off-road use. To be used with 525 sprockets only.     Brand: DID Typ: ZVM-X2 Pitch: 525 (5/8 x 5/16) Colour: steel Tensile strength: 4720 Kg (46,3 KN) Wear reistance: 4000 Chain type: endless or hollow-rivet link   FAQ: What is the difference between the STEEL version (black inner and outer plates) and the Black&Black (Bk&Bk) or the Gold & Gold (gold plates, gold inside) chains? The GOLD or BLACK plated chains are not only an aesthetic point. Due to an additional heat treating and finishing process, the outside of the chain is more durable against elements like rain, dirt, salt. So the chain doesn not only look better, it also lasts longer and is more durable.

Ultra strong Heavy-Duty D.I.D 530 ZVM-X2 X-Ring chain (5/8 x 5/16). The Chain is suitable for all on- and off-road use. ZVM-X2 chains are the best choice for the most severe and demanding applications. Among other characteristics, the 530-ZVM-X2 chains feature high alloy silver steel plates and pins, solid bushings and rollers, shot-peening of plates, pins and rollers, performance-enhancing pre-stretching and ultra strong outer plates. The used chain DID 530 ZVM-X2 has an outstanding strength of about 4750 kg, so it is about 30% stronger than a lot standart 525 chains! We offer this chain in a closed (endless) or open chain version with an or Hollow-Rivet-link. A Solid- or Hollow Rivet link can be found in the Tab 'Accessories'. Avaiable in silver (steel colour) or colden coloured surface. To be used with 530 pitch sprockets only!  

DID VX3 525 pitch spring clip link replacement single chain masterlink in gold (G&B) Chain: DID 525 VX3 Link type: Spring Clip Link Chain size: 525 / pitch 5/8'' x 5/16'' Colour: gold/black (G&B)   A special tool is needed for secure rivetting of this link. See accessories.

DID VX3 525 pitch spring clip link replacement single chain masterlink in gold (G&B) Chain: DID 525 VX3 Link type: Spring Clip Link Chain size: 525 / pitch 5/8'' x 5/16'' Colour: steel colour   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 VX3 chains. Chain: DID 525 VX3 Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: gold/black (G&B)   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 VX3 chains. Chain: DID 525 VX3 Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: steel colour   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 ZVM-X2 chains. Chain: DID 525 ZVM-X2 Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: gold (G&G)   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 ZVM-X2 chains. Chain: DID 525 ZVM-X2 Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: black/black (Bk&Bk)   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 ZVM-X2 chains. Chain: DID 525 ZVM-X2 Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: steel colour   A special tool is needed for secure rivetting of this link. See accessories.

Solid-rivet Masterlock for securely locking the DID 525 ZVM-X2 chains. Chain: DID 525 ZVM-X2 Link type: Solid-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: gold (G&G)   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 ZVMX chains. Chain: DID 525 ZVMX Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: black/black (Bk&Bk)   A special tool is needed for secure rivetting of this link. See accessories.

Soft-rivet lock for securely locking the DID 525 ZVMX chains. Chain: DID 525 ZVMX Link type: Hollow-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: gold (G&G)   A special tool is needed for secure rivetting of this link. See accessories.

Solid-rivet Masterlock for securely locking the DID 525 ZVMX chains. Chain: DID 525 ZVMX Link type: Solid-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: silver (S&S)   A special tool is needed for secure rivetting of this link. See accessories.

Solid-rivet Masterlock for securely locking the DID 525 ZVMX chains. Chain: DID 525 ZVMX Link type: Solid-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: steel colour   A special tool is needed for secure rivetting of this link. See accessories.

Solid-rivet Masterlock for securely locking the DID 525 ZVM-X2 chains. Chain: DID 525 ZVM-X2 Link type: Solid-rivet link Chain size: 525 / Teilung 5/8'' x 5/16'' Colour: steel colour   A special tool is needed for secure rivetting of this link. See accessories.