Filter products


Replacement for worn out or leaky stock Yamaha fork oil seals with 43mm diameter. High-quality NOK spare seal set with additional sealing lip (3-fold sealing). Essential as replacement when travelling or as a replacement part for worn stock seals. Sold as a pair. Fits e.g.: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA Tenere (ABS) 2011-2016 · Yamaha XT-1200Z Super Tenere 2010-2013 · Yamaha XT-1200Z Super Tenere 2014-2016 · Yamaha XT-1200Z Super Tenere 2017- · Yamaha XT-1200ZE Super Tenere 2014-2016 · Yamaha XT-1200ZE Super Tenere 2017-


Available, delivery time: 1-3 days
Fork slide bearings Yamaha XT-1200Z Super Tenere Replacement set for worn fork bushings (slide bearings). While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. Replacement set of 4 fork bushing to overhaul your XT-1200Z/ZE forks. We offer a high-quality set of 4 bushings for both fork tubes. Fits all: · Yamaha XT-1200Z/ZE Super Tenere 2010 onwards


Available, delivery time: 1-3 days
Complete front fork repair and overhaul set for Yamaha XT1200Z and XT1200ZE Super Tenere While repairing or maintenance a front fork you should not only change the oil, seals and dust caps, you also have to replace the bushings. Only this will give your fork the smooth travel you want. Worn bushings can cause a damage on the chrome surface on the fork tubes! Only new, true to size bushings will give youf fork the best response behaviour and the best guidance for the fork tubes. his is a repair set for both fork tubes. All necessary parts are included. eeded fork oil to be ordered seperately. Content: Slide metal, inner Slide metal, outer Oil seals Dust caps O-Rings Seal rings Safety clips Fits all: Yamaha XT-1200Z Super Tenere 2010 onwards Yamaha XT-1200ZE Super Tenere 2014 onwards


Available, delivery time: 1-3 days
Headset bearing kit Yamaha XT-1200Z Super Tenere Unfortunately the stock Yamaha headset bearings don't last for ever. Sometimes it's necessary to exchange the bearings after 2-3 years. Important: Use enough grease while mounting the bearings. Yamaha was a little lazy at this point. Set with upper and lower bearing including the needed gaskets! Fits e.g. all: · Yamaha XT 1200 ZA Super Tenere DP011 · Yamaha XT 1200 ZA Super Tenere DP015 · Yamaha XT 1200 ZE A Super Tenere DP046 · Yamaha XT 1200 ZA Super Tenere DP071 · Yamaha XT 1200 ZA Super Tenere/Worldcrosser DP015 · Yamaha XT 1200 ZA Super Tenere/Worldcrosser DP041 · Yamaha XT 1200 ZE Super Tenere/Worldcrosser DP046 · Yamaha XT 1200 ZE Super Tenere / Raid Edition DP075


Ready to ship in approx. 5 days
If you find your fork tube bend after a heavy downfall in the country or on the street, you can now get an unexpensive replacement here. The tubes exactly match the original as regards length, quality, and manufacturing. By using only the best material and a very careful manufacturing process we can guarantee a constant high qualitiy of the tubes. Price per piece. Fits for all: Yamaha XT-1200Z Super Tenere Yamaha XT-1200ZE Super Tenere


Ready to ship in approx. 5 days
Motul Factory Line fork oil is a syntectic fork oil for on- and off-road use. The synthetic fork oil of Motul represent a high standard in the fork oil technology. The products are designed for use in all chassis components and provide good performance characteristics. To obtain the optimum viscosity for vehicle and operating conditions this fork oils are mixable. Specific formulation that contains an anti-friction additive specially developed by MOTUL to create easier sliding and to avoid drag in the fork. Stable absorption trough extended range of temperature thanks to the synthetic base stocks. Seals protection: excellent lubricant / elastomer compatibility. Anti-wear, anti-corrosion, anti-foaming. RECOMMENDATIONS MOTUL fork oil can be mixed to obtain the required absorption effect. Use the exact quantity recommended by the fork manufacturer. Specially formulated for SHOWA, KAYABA, ÖHLINS, WP USD forks and standard motorbike forks · Good damping properties at all temperatures · Good air releasea · Wear protection for extended service life of the fork components · Protection against corrosion of internal components · Content: 1 liter tin

Motul fork oil is a technosynthese fork oil for on- and off-road use. The technosynthese fork oil of Motul represent a high standard in the fork oil technology. The products are designed for use in all chassis components and provide good performance characteristics. To obtain the optimum viscosity for vehicle and operating conditions this fork oils are mixable. Specific Technosynthese® formulation that contains an anti-friction additive specially developed by MOTUL to create easier sliding and to avoid drag in the fork. Stable absorption trough extended range of temperature thanks to the synthetic base stocks. Seals protection: excellent lubricant / elastomer compatibility. Anti-wear, anti-corrosion, anti-foaming. RECOMMENDATIONS MOTUL Fork Oil Expert can be mixed to obtain the required absorption effect. Use the exact quantity recommended by the fork manufacturer. · Good damping properties at all temperatures · Good air release · Wear protection for extended service life of the fork components · Protection against corrosion of internal components · Content: 1 liter tin


Available, delivery time: 1-3 days
Neopren fork sleeves to protect the fork tubes from damage by stones, mud or e.g. ice. Fork protector sleeves made of black neopren. Can by mounted under the stock plastic fork protection. Ideal protection for the oil seals against wearing off (mud, dust, ice - in winter...). Easy mounting, just pull it over the fork tubes. Color: black, sold as a pair for both fork tubes.


Öhlins has developed high-quality oils for its shock absorbers, forks, and cartridge kits. They include a range of fork oils which will increase the performance of original telescopic and upside down forks. The different viscosities available make it possible to select the most suitable oil. What distinguishes Öhlins fork oil from conventional oils is that it reduces friction, stays cleaner, has a long service life, and is highly resistant to foaming (known as cavitation). Together with the front fork springs from Öhlins, a considerable improvement in the responsiveness and performance of an original fork can be achieved. Available fork oil types are: R&T: Fork oil with a viscosity of 19.0 centistokes at 40° Celsius (similar SAE 5 W) #5: Fork oil with a viscosity of 20.0 centistokes at 40° Celsius (similar SAE 5 W) #10: Fork oil with a viscosity of 40.0 centistokes at 40° Celsius (similar SAE 20 W) #20: Fork oil with a viscosity of 98.0 centistokes at 40° Celsius (similar SAE 40 W)


Available, delivery time: 1-3 days
Snap rings 43 mm forks Fits e.g. for all Yamaha Tenere 700, Yamaha XT-660R/X, Yamaha XT-660Z Tenere, Yamaha XT-1200Z Super Tenere


Rubber fork protections ø 43/48 with carbon effect finishing. Fork sleeves to protect the outer fork tubes from damage by stones, mud etc. Fork protector sleeves made of coloured flexible rubber fabric with velco straps for quick installation and removal. Ideal protection for the anodised fork tubes against flying stones, debis and in a fall over. Easy mounting with velco straps. Sold as a pair for both fork tubes. Material: Nylon 25% Polyester 20% PVC 50% Others 5% Size: Length: 24 mm Diameter: 45 - 50 mm


Wheel bearings oil seals Yamaha XT1200Z Super Tenere When changing the wheel bearings you should carefully check also the dust (oil) seals, as they are worn quite often. We offer high quality seal set from according to OEM specifications. Complete seal sets for front wheel, rear wheel or as a set for front and rear.. Fits all: · Yamaha XT-1200Z Super Tenere 2010-2021 · Yamaha XT-1200ZE Super Tenere 2014-2021


Front or rear wheel bearing set Yamaha XT-1200Z and XT-1200ZE. We offer high quality, double sealed (2RS) bearing set from german or european manufactors. Avaiable as complete bearing sets for the front or rear wheel as well as a set for both axles.Due to non sealing of the oem wheel bearings, this parts will be worn quite early. We offer high quality, double sealed (2RS) bearing set from european manufactors. Fits e.g.: · Yamaha XT-1200Z 2010-2012 DP01 · Yamaha XT-1200Z 2012-2014 DP01 · Yamaha XT-1200Z/ZE 2014-2016 DP04 · Yamaha XT-1200Z/ZE 2016- DP07 · Worldcrosser and Raid models


Ready to ship in approx. 5 days
Wilbers fork springs for Yamaha XT-1200Z Super Tenere 2010 onwards. Made of high-quality chrome-silicon-springsteel, wound progressively, slightly harder than the original but smoother concerning the responding behaviour. With Wilbers fork springs you can achieve a perfect front fork setup without bottomingout! Lifetime warranty! Air chamber: 140mm Fork oil: SAE 5 Quantity: 1 Liter Fits all: · Yamaha XT-1200Z Super Tenere DP01 (10-13) · Yamaha XT-1200Z Super Tenere DP04 (14-16) · Yamaha XT-1200Z Super Tenere DP07 (17-)