Driving the XT660s without this anoying and maddening plopping and banging when closing throttle?  Closing the AGR system with a blanket with help you ouit of this mess. Installing is easy - you do not have to remove the cylinder head for this! Works perfecly with aftermarket exhaust systems. Precisly made from laser cutted stainless steel, glas bead blasted. Including also stainless steel bolds. · no banging and popping in exhaust sound! · Works perfectly with aftermarket exhaust systems · perfect for tuned bikes. · Easy to install Fits all: · Yamaha XT-660R 2004-2016 · Yamaha XT-660X 2004-2016 · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016 · Yamaha MT-03 2005-2008  

Paper air filter in OEM quality for the XT-660Z Tenere Affordable, high quality filter as a replacement for the stock filter. High quality with very good air flow. Fits all: · Yamaha XT660Z Tenere 2008-2016 · Yamaha und XT-660ZA (ABS) Tenere 2011-2016

DNA complete Cleaning and Care Set The cleaning set consists of a spraying can of oil (220ml) and a bottle of cleaner/degreaser (270ml). Cleaning instructions included in delivery. DNA Cleaner and degreaser DNA Air Filter Cleaner is the only cleaner formulated to clean cotton mesh filters like DNA and K&N Filtercharger elements. The use of any other cleaning solution can void the filter's warranty, and quite possibly could damage the cotton material. DNA's Cleaner works to dissolve the dirt build up and old filter oil, and can be washed away with water. Complete instructions on bottle. 0.27L squeese bottle. DNA Filtercharger oil DNA's Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in DNA or K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with DNA Air Filter Cleaner.   0.22L squeese bottle.  

DNA Air Filter Cleaner and Degreaser DNA Air Filter Cleaner is the only cleaner formulated to clean cotton mesh filters like DNA and K&N Filtercharger elements. The use of any other cleaning solution can void the filter's warranty, and quite possibly could damage the cotton material. DNA's Cleaner works to dissolve the dirt build up and old filter oil, and can be washed away with water. Complete instructions on bottle. 0.27 l squeese bottle.

DNA Filtercharger oil DNA's Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in DNA or K&N Filtercharger elements providing a superior air filtration system. When used as directed, it quickly penetrates the filter pleats, where it remains suspended in the cotton fabric. Saturation is maintained until the element is cleaned with DNA Air Filter Cleaner. 0.22 l squeese bottle.

DNA high-flow airfilter for Yamaha XT-660Z Tenere simply replace the standard airfilter. The airfilter box doesn't have to be modified. Up to 40% more air flow in comparision to the standard paper filter. No entry in the documents required. The filter only has to be cleaned when it has a 2-3mm thick layer of dirt. Cleaning only each approx. 80.000km. No more filter change - the oil impregnated cotton fabric of the filter ensures a maintenance-free life. The filter merely hast to be cleaned and oiled overy now and then. The DNA Exchange airfilter improves the performance: because of the better air flow the mixture volume is build up and provided more quickly. The engine reacts more spontaneously when accelerating. It also converts the faster filling of the cylinder into a better acceleration. In addition, this high flow filter is often able to correct the losses which are caused by complicated ways of air supply and airfilter boxes which often constitute a compromise between space proportion and effectivity. The High Performance! The High Performance of the DNA air filter is a must for all of our designs and our R&D team uses up to date Hi Tec equipment to achieve the best performance. Our R&D department is equipped with the latest Dynojet motorcycle & automotive dyno's and sophisticated air flow measuring equipment. Every single filter is tested and checked that it meets the High Performance standards that DNA has established. As a final result the customer receives the best performance air filter money can buy! The Long Life We at DNA proudly introduce a filter that can last the life of the vehicle. High quality materials, Hi Tec manufacturing process, designs that meet OEM quality levels and very strict quality control, is the secret behind the DNA Air Filters and the factor that allows us to give a Lifetime Warranty! Taking Care of the Filter The DNA Air Filter will serve you for many years and needs very little care using the DNA Service kit. When the filter is dirty simply follow the instructions that you can find in the service kit, allow the filter to dry, reoil and you are ready to use your filter again, like new! Taking Care of the Environment DNA brings "Taking care of the environment" one step ahead, by designing, producing and marketing a filter that you will never need to throw away. Using cotton instead of paper, we provide work to the cotton industry and on the other side no trees have to be sacrificed for paper to be produced. DNA Air Filter owners do not produce unnecessary waste as paper filter owners have to do every time the life of the paper filter ends. Even the box is designed and manufactured of top quality material allowing you to keep it in your garage and use it as a storage box.   1.. Polluted and strongly swirling air enters the filter 2.. DNA's new, multi-layered made and oil-soaked cotton gauze 3.. Dirt and dust adhere to the outside layer of the filter 4.. The special filter oil develops a specific static adhesion at the gauze and thus filters even the smallets dust particles. 5.. Finely woven, epoxy coated aluminium fabric 6.. Clean and swirl-free air flows into the carburetor.

Mounted on top of the air box the stock airbox snorkel breathes hot air from under the fueltank heated up by the engine. This is not a good solution for power and can also cause a damage of the engine from overheating! This problem can be solved very easy by using this new rubber and metal made airbox inlett. Just replace the stock part with this new inlett. You can use this part with the genuine Yamaha or the DNA airfilter. Installation of this DNA S2 Cover is very easy, simply follow the installation instructions included by DNA. This DNA S2 application is designed to increase the Power & Torque of the XT 660 Z and can be used for road and track use. This application includes the DNA Stage 2 filterbox cover. This Stage 2 application is developed for race & track use and in some countries it may not be legal to use it on the road. Facts: · up to 56% better air flow · more power and torque · more and cooler air for the engine · better intake sound · very quick and easy mounting Fits all: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016

DNA Stage 3 (2) air box side cover with integrated filter and laser cutted cover. Your Tenere needs more power? The Tenere does not really satisfys you? Here's the solution! The DNA Stage 3 air filter cover set for the left air box side. Replaces the stock air box side cover. Easy exchange - just takes 2 minutes. Maximum airflow - maximum power! Also for every day use - no problem with rain or splash water. Only a deep river crossing might be a problem... Delivery including laser cutted, power coated aluminium cover, seal grease and instructions. Fits: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016

Avaiable for the Power Commander V is the add-on Auto Tune module which allows for live, closed loop EFI tuning. Based closely on Dynojet's new Wideband Commander 2 it features a OEM quality Bosch Wideband O2 sensor. The Auto tune module allows users set a demanded air/fuel ratio in the Power Commander V software and the Auto tune will make adjustments in real time. When enabled there is an AFR table with the same 250 RPM increment resolution as the fuel table. The Auto tune can be configured for minimum run time before live sample as well as maximum +/- fuel adjustments in relation to the base map. The Auto Tune kit can also use the Dynojet map switch or any open/closed switch which allows the user to switch between live tuning to the parameters set thru the PC V software or the base map in the PC V unit. You can leave the map switch in "live" mode, or if you want to write the fuel map you can connect to the PC V software, retrieve the fuel trims and either write them to the map or clear them. We have also compared several Auto Tune derived maps to dyno tuned maps and the results were impressive. A very important requirement for building a good tune is to have a close base map to start out with, as the Auto Tune writes its fuel trims off the base PC V map. The Auto Tune module does require some basic wiring from the sensor harness into the modules. The Auto Tune module is a very good choice for those with a unique mods, where a dyno is not available, or for those looking for the ability to tune in real time. The ultimate combination we recommend is combining a full dyno tune session with the Auto tune. We build the map for the best combination of performance and efficiency, and then implement the AFR's we developed into the Auto Tune AFR table. This strategy will provide the best performance under all conditions. · Live fuel mixture setting while driving · Basic setting already programmed · to be used as a mobile setting module · incl. OEM quality Bosch Wideband O2 sensor · can be used only with the Power Commander V · NOT FOR USE WITH 2-CYLINDER BIKES (e.g. XT1200Z)!!!!  

The secret of the new NGK Iridum IX spark plug is the laser-welded electrode made of Iridium. Thanks to her "minimal" diameter of only 0,6mm it concentrates the ignition voltage. This improves the combustion in all drives. Thereby the engine runs absolutely round, the motorbike speeds up faster. The high-tech metal iridium ensures the exact spacing between the electrodes. This prevents ignition misfire. The XT gets a notably softer engine operation, the gas acceptance is improved. Further, the Iridium spark plugs' durability is twice as long as that of "normal" copper spark plugs. Fits all: · Yamaha XT-660 R/X and XT-660Z Tenere.

NGK offer high qulaity spark plugs for the XT660 model range. NGK standard plugs are constructed for longer life and optimum performance. · Trivalent metal plating provides superior anti-corrosion and anti-seizing properties · Corrugated ribs prevent Flashover · Pure alumina silicate ceramic Insulator, provides superior strength and better heat transfer · Copper Core aids in heat removal · Triple seals prevent leakage With a new spark plug, the XT often gets a notably softer engine operation, the gas acceptance is improved. Fits all: · Yamaha XT-660 R/X and XT-660Z Tenere.

The O2-Optimizer is mounted between the stock lambda sensor and the stock wiring by using the stock plugs With the O2 optimizer the closed-loop area in the lower revs is set to a fix value. ECU stopps regulating the injection and you get more power and less shaking in the lower revs. Using a Power Commander without the O2 optimizer will not give you great benefits!! · when only removing the lamda (O2) sensor the bike will have error codes in the bike electric · adjusting of the closed-loop range possible by using a O2 optimizer (only authorized Tuning centers) · without O2 optimizer the closed-area can not be adjusted - even not with a Power Commander What you can expect: · no shaking in lower revs when using a Power Commander · no error code in the display while using in the bikes without O2-sensor · perfect adjustment of the bike with a Power Commander · Fits all XT660R (2007-->)  -  XT660X (2007-->)  -  XT660Z  -  XT660ZA Tenere ABS  

If you use K&N, DNA and other Cotton-Mesh filters like this in very dust conditions, the filter effiziency will be much lower with a dirty air filter. When very dirty these filter also might  let pass fine dust as well. Also the stock paper filter does not have enough filter effizency for off-road use. Due this reason we have developed an off-road foam air filter kit for the Tenere. The foam filter can be cleaned very easily with normal fuel (very easy on a long trip), the filter can be oiled with every foam air filter oil. Compared to the stock paper filter the air flow is strongly improved. The inlett of the air filter is 90mm! It can be used with or without the stock snorkel. No stage 2 filter is necessary! Very usefull for long distance trips in dusty conditions, e.g. africa trips. The filter kit includes the racing foam filter and a filter cage, both special made for the XT660Z Tenere. · very high filter efficency · easy to clean · high air flow · no stage 2 filter is necessary · perfect for use in very dusty roads · Delivery: Foam filter and the needed filter cage · Spare filters avaiable - see accessories Fits all: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016

Racing Camshaft by OTR. Special made for the Yamaha XT-660!   You can expect more power and an improved torque. Appr. 5 PS and 4 Nm torque are available. The cam is deliverd in exchange of the old one. We try to always have a suffienct amount of cams for exchange in stock. If this is not the case, you should expect a delivery period of 14 days.   Do you want to keep your original cam? No problem! We also offer cams withouth exchange, however, with an extra charge.   The camshaft can be used with the original Yamaha valve springs. Note: Exchange camshafts must not be defective!   Fits all: Yamaha XT-660R 2004 - 2016 Yamaha XT-660X 2004 - 2016 Yamaha XT-660Z Tenere 2008 - 2016 Yamaha XT-660ZA Tenere 2011 - 2016

The concept is simple: the more you flow, the more you go. The better you can move air and fuel through the motor, the more power you will produce. To achieve this with an acceptable amount of money we now offer the boring of the throttle body. The whole throttle body will be machined to a +2mm bigger diameter. The axle is flow optimized and a new, special made throttle plate is mounted. This offers a maximum air flow. Horsepower gains up top without losing torque and power down low. An added bonus is that with the +2mm throttle body, the horsepower and torque is held longer in a usable range. What can you expect: up to 1 PS in lower, up to 3 PS in the upper range. This will make your 660 a real beast! We need your throttle body for about 6-14 days here in the workshop, depending on season. Please sent in the throttle body only - without any additional parts like the injector, throttle line bracket, TPS (throttle position sensor), gaskets, springs or any other parts. Only the housing, axle and throttle flap! Fits all: · Yamaha XT-660R · Yamaha XT-660X · Yamaha XT-660Z Tenere · Yamaha XT-660ZA Tenere

Power Commander 6 Injection module with O2 Optimizer for the Yamaha XT-660Z Tenere 2008 - 2016   The Power Commander 6 fuel tuner optimizes your ride anywhere you’ll roam. This sleek module seamlessly optimizes your air/fuel ratio without directly changing the ECU, making it effortless to push it to the max. Easily uninstall to revert back to factory default settings when you feel like giving everyone else a chance. Power Commander 6 takes the guesswork out of pairing efficiency with performance, keeping your focus where it belongs — on the journey ahead. Better than ever (and smaller than ever), Power Commander 6 now has a fuel change range of -100/+250%, automatically giving you the best mix of performance and fuel efficiency at all times. This fuel tuner holds two maps at a time for multiple drive options (via the Power Commander V map switch accessory), as well as 10 throttle position columns, so you won’t sacrifice comfort for performance. Featuring a plug-and-play kit, Power Commander V can be installed discreetly underneath your seat, ensuring your ride looks as good as it runs.   Power Commander 6   Compact design for discrete placement & easy uninstallation to revert to stock settings Vast library of tunes for any combination of aftermarket parts Easily change & upgrade tunes as you upgrade parts Comes with Power Core software that connects dyno runs with fuel tuners to unlock your ride’s potential 2 position map switching function built in (map switch not included) Pick up possibility for gearing an speed. Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as  temperature) Fuel mixture can be changed from -100% / +250% 10 throttle positions are now avaiable Enhanced adjustment range of the accelerator pump.. Connetion possibility to the Dynojet Autotune - this allows adjument of the fuel mixture while driving. This Power Commander version includes the O2 optimizer electronic. No extra lamda sensor eliminator is needed. Scope of Delivery:   Dynojet Power Commander 6 Dynojet O2 Optimizer Mounting Material Mounting instructions     Fits all Yamaha XT-660Z Tenere 2008-2016:   Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA ABS Tenere 2011-2016   If you are interested in a custom made, perfectly fitting map for your bike, get in contact with us here in Cologne. You will not regret it!

Replacement foam filter for OTR foam filter kit Yamaha XT-660Z Tenere. Needed filter cage only included in filter kit SLF-OTR-660Z-K! Fits all: · Yamaha XT-660Z Tenere 2008-2016 · Yamaha XT-660ZA ABS Tenere 2011-2016