Handguards Acerbis X-Factor incl. mounting kit Yamaha XT-660Z Tenere   The X-Factor Rallye Handguards feature an very strong aluminum bar with big spoiler for perfect wind and weather protection. Different colours make the handguards unique on your XT660Z Tenere. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection.   Specs: Closed hand guard from Acerbis Very strong aluminium bar Anticorodal mounting kit to fasten the hand guard to the handlebar Special mouning kit for OEM Yamaha XT660Z Tenere handlebar included Mounting kit for 22 and 28mm included Big Dual-injection covers Avaiable in various colour combinations Sold as a Pair (left+right side)   Fits all: Yamaha Yamaha XT-660Z Tenere 2008-2016 Yamaha Yamaha XT-660ZA ABS Tenere 2011-2016 - for mounting 20 mm handlebar risers are needed

Handguards Acerbis X-Factor incl. universal mounting kit The X-Factor Rallye Handguards feature an very strong aluminum bar with big spoiler for perfect wind and weather protection. Different colours make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Perfect for trail riding or the big adventure as well as for daily use. Big wind deflector for perfect wind- and weather protection. Details: · Closed hand guard from Acerbis · very strong aluminium bar · Anticorodal mounting kit to fasten the hand guard to the handlebar · Steel expander for tighter fastening and to oppose torsion in case of impact. · Mounting kit for 22 and 28mm included · big Dual-injection covers · Avaiable in various colour combinations · Sold as a Pair (left+right side) Fits all: · universal

Handguards Acerbis X-Factory incl. model specific mounting kit for the Yamaha XT-660Z Tenere   The all new X-Factory Handguards feature an ultra strong steel bar wrapped with an injection moulded Nylon composite. Different colours make the handguards unique on your bike. A replaceable dual injected polypropylene shield mounts to the bar offering unsurmounted protection from roost, debris, and extreme conditions. Optical highlight is the coloured plastic wrap. Perfect for trail riding or the big adventure as well as for Super-Moto use. We think this is most likely the strongest handguard you can buy.   Facts: 2-Point mount closed hand guards Steel bar covered with plastic in different colours Anticorodal armbands to fasten the hand guard to the handlebar Steel expander for tighter fastening and to oppose torsion in case of impact. Dual-injection covers Avaiable in various colour combinations Mouning kit for OEM XT660Z handlebar and 28mm aftermarket bars included Sold as a Pair (left+right side)   Fits for all: Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA (ABS) Tenere 2011-2016 !! for the ABS model at least 20mm risers are needed - see accessories tab

The Enduro 'E' version of the Multiplo handguard is extremely resistent thanks to special hardening treatment used for the aluminum. Due to the curved aluminum bar design, it is possible to make a quick lateral hand release from the grip bar in case of an emergency. Available in various colors.  The changeable, bold on plastic spoilers and the aluminium deflector can be removed easily.  With the in two sizes avaiable plastic spoilers, the handguards are state-of-the-art in design and function. The Enduroversion „E“ is special made for the Rally use. The handguard can be used with the aluminium insert and the plasic spoilersor only with the aluminium insert. Additional, bigger wind deflectors are sold seperately. See accessories. Including a  mounting kit for the 22mm stock and 28mm handlebars!  Fits 22mm and 28mm handlebars (like e.g. Magura or ProTaper). This means, that you do not have to buy a second mounting kit, if you like buy 28mm handlebar later! · Closed handguards - the aluminium bar is mounted to the end of the handlebar · due to the curved bar it's possible it is possible to make a quick lateral hand release · Defectors available in various colors · Plastic part can be replaced · Bigger wind deflectors avaiable · including  mounting kit for 22 and 28mm handlebars · black anodised aluminium bars · including a special mounting kit for oem XT-660 Tenere and aftermarket 22 / 28 mm handlebars · Sold as a Pair (left+right side) · Fits the XT660ZA (ABS) version only in combination with 20mm handlebar risers! See accessories.

Replacement Spoiler for Acerbis Multiplo handguards. Easy mounting within minutes only by loosening two screws. Price per pair.  

Spoiler for Rally Pro handguards Good wind- and weather protection - easy mounting · Material: Plastic, black · Price per pair

Barkbuster Bar End Insert Kit. To be used with the Barkbuster handguard kits. · Avaiable for different inner bar diameters · Made from Steel and aluminium · sold as a pair

 Barkbusters Hardware Kit - Two Point Mount (BHG-019) Yamaha XT-660Z Tenere The robust two-point connection of the locked aluminium bar is attached to the handlebar internal thread and handlebar and meets the highest of demands. The sturdy aluminum aluminium bar for VPS, Storm and Kobra handguards protect handlebars and riders alike in the event of accidents and falls, while the handguard shells (available separately) made of impact-resistant polypropylene provide additional protection against weather, flying rocks and off-road driving. · Yamaha XT-660Z Tenere specific mounting kit with aluminium brackets for particularly strong two-point attachment. · Compatible with VPS, KOBRA or STORM plastic guards · Handle and hand protection · Easy installation of the plastic guards on the aluminum bars  Included in delivery · 1 x Handguard mounting kit, left and right · Mounting instructions · Mounting material  Details · Material: Aluminum · Surface: powder coated · Color: silver  Note · Only the aluminum bars for the right and left sides are included in delivery. VPS, KOBRA or STORM plastic guards are sold separately.  

Barkbuster Skid plates. To be used with the Barkbuster handguard kits · VPS Skid Plate (set of 2) · Fit in conjunction with VPS / Jet plastic guards on a Barkbusters backbone · Protects the outer edge of the aluminium backbone · Adds a stylish finish to the handguard · Available in Black only.

Barkbusters Spare Wind Deflector Set for VPS spoilers · Spare Wind Deflector Set · Left and right pair with mounting screws · Wind deflectors can be fitted in two positions for variable wind protection · High impact resistant plastic · Available in Black or White. · Sold as a pair (left / right)

Barkbuster STORM plastic guards. To be used with the Barkbuster handguard kit · STROM plastic guards only · Left and right pair with mounting screws. · Can be fitted to Barkbusters aluminium backbones (except EGO backbone). · Designed for excellent wind and cold weather protection · High impact resistant plastic guards. · Avaiable in black or white

Barkbuster VPS plastic guards. To be used with the Barkbuster handguard kits   VPS plastic guards only (with variable height wind deflector set). Left and right pair with mounting screws. Can be fitted to Barkbusters aluminium backbones (except EGO backbone). Wind deflectors can be fitted in two positions for variable wind protection. Deflectors can be removed in minutes for a more compact feel. High impact resistant plastic guards. Extensive range of colours matched to popular motorcycles models. Skid Plate available for added style and protection to the outer edge of the Barkbusters backbone . NOTE: New Colour “Black on Black” supplied as, Black VPS Guard with Black Barkbusters Logo and Black Wind Deflector.

Adjustable aluminum brake lever for Yamaha Tenere 700 (XTZ-690) in a very good OEM quality. 6-fold adjustable. Precisely made, easy fit. Material: Aluminium, colour: silver Fits all: · Yamaha Yamaha XT-660Z Tenere 2008-2016 · Yamaha Yamaha XT-660ZA ABS Tenere 2011-2016

Precisely machined billet clutch and brake lever for the Yamaha XT660Z Tenere Our Clutch and Brake Lever are CNC Machined of 6061-T6 billet aluminum to precise tolerances. Both clutch and brake levers are fully adjustable and we offer them in s stiff(straight) or foldable version. Our levers even come in a variety of colors to match your Tenere. Just remove your old levers, and re-insert the new one. Simple, but change the look of your bike totally. The levers have a small inset 1-1/4 inches from the end of the lever to provide a break-away point in a garage tip-over or otherwise. Adjustable in 6 positions. Made from billet aluminium. The levers are avaiable in black, blue, red and silver. The small adjuster tips are avaiable in blue, red, black and silver. This lever version is about 2.5cm shorter than oem levers. So e.g. mounting of handguards will be much easier and levers do not break that easy. With the almost infinite number of different colour combinations, you can put together your own desired levers and make your Tenere unmistakable. Due to the many different variants, the lever sets are always assembled individually and made to order only after an order has been placed - so please allow for a short delivery time. · CNC-machined levers · high grade air craft aluminium · Pre-defined breakage-notch for additional safety · Adjustable in 6 positions and in a foldable or standard version · available in different colors · foldable or non-foldable version · Choose lever type and color in the menue · Steet legal with TUV certificate Fits all: · Yamaha XT-660Z Tenere 2008-20016 · Yamaha XT-660ZA (ABS) Tenere 2011-2016

Replacement clutch lever for the Yamaha XT-660Z Tenere in a very good OEM quality.   Details: OEM shape and length Material: Aluminium Color: black   Fits all: Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA ABS Tenere 2011-2016

Precisely CNC machined handlebar clamp set for 22 mm (7/8") standard or 28 mm (1-1/8") handlebars like e.g. Magura, Answer or ProTaperfor the Yamaha XT-660Z and XT-660ZA (ABS) model range. Special set made with the needed height and all mounting parts for the XT660Z and XT660ZA . We manufacture this clamps on modern cnc machines here in our own production. Made in Germany!   The fully cnc machined clamping sets have a height of 20mm (bottom of clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. The shown complete height is measured between the lower side of the handlebar and the upper side of the triple clamps.   The dropdown menue shows the height you will get compared to the oem handlebar height. This is measured between the lower end of the handlebar and the upper side of the triple clamps. So +20 mm means that the handlebar position will be +20 mm compared to the oem height. If you want to have oem height, choose +0 mm. If the listed height is not enough for your needs, you can add extra height with the spacers shown in the 'accessories' section. New bolts needed, see accessries. Mounting heights up to +30mm compared to OEM height is quite easy, all height more than +30mm might require longer cable and wires. See accessories.   M10 bolts used for mounting to the triple clamp. Delivered bolts are 40 mm longer than height of ordered clamps. If you have choosen a height of e.g. 50 mm, the included bolts are 90 mm long. If you need different bolt length, see accessories tab. For individually needed distance bushings see accessories.   Details: Material: aircraft aluminium 7075 T6 Color: silver or black anodised Price per pair Delivery including fiiting M10 bolts Made by OTR with 10 years warranty!   Fits all:   Yamaha XT-660Z Tenere 2010-2016 Yamaha XT-6660ZA ABS Tenere 2011-2016

Off-centered handlebar mounting set for 22 mm handlebars   The excentric manufacturing offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The fully cnc machined clamping sets have a height of  30 mm (upper side of triple clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. So if you need a total height of e.g. 50 mm, choose the handlebar clamp (30 mm height) and add a 20 mm distance bushing.   Made of high grade aircraft aluminium, black or silver anodised. For needed distance bushings see accessories. Shown bushings not included!   Supplied M10 bolts have a free length  of 40 mm. If you have e.g. a 40 mm high triple clamp, these bolts will fit. If you need longer/shorter bolts, please order separately (see accessories).   Fits e.g. Yamaha XT-660R/X, XT-660Z Tenere, TT-600 (S/E/R/RE), XT-600, XT-550, XTz-660 any many more bikes with a bolt-on clamp set and 22 mm handlebar Please measure the needed height on your bike.   Tested, maximum possible heights with stock cables and wires:   Yamaha Tenere 700            -   90 mm Yamaha XT-660Z Tenere   -   70 mm Yamaha XTz-660                 -   70 mm Yamaha XT-660R/X            -   50 mm Yamaha TT-600                   -   50 mm Yamaha XT-600                   -   50 mm Yamaha XT-550                   -   50 mm   Color: silver or black anodised Price per pair Made in Germany by OTR with 10 years warranty! Shown spacers not included in delivery

Off-centered handlebar mounting set for 28 mm (1/1/8") handlebars like e.g. Magura, Renthal Pro Taper.   The excentric manufacturing offers a +/-5 mm for- or backward orientated handlebar mounting positon compared to a centered position. The fully cnc machined clamping sets have a height of  30 mm (upper side of triple clamp to lower side of handlebar). By using the avaiable distance bushings almost all needed heights are possible. So if you need a total height of e.g. 50mm, choose the handlebar clamp (30 mm height) and add a 20 mm distance bushing.   Made of high grade aircraft aluminium, black or silver anodised. For needed distance bushings see accessories. Shown bushings not included!   Supplied M10 bolts have a free length  of 40 mm. If you have e.g. a 40 mm high triple clamp, these bolts will fit. If you need longer/shorter bolts, please order separately (see accessories).   Fits e.g. Yamaha Tenere 700 or also, with new 28.6mm handlebar, Yamaha XT-660R/X, XT-660Z Tenere, TT-600 (S/E/R/RE), XT-600, XT-550, XTz-660 any many more bikes with a bolt-on clamp set. Please measure the needed height on your bike.   Tested, maximum possible heights with stock cables and wires:   Yamaha Tenere 700            -   90 mm Yamaha XT-660Z Tenere   -   70 mm Yamaha XTz-660                 -   70 mm Yamaha XT-660R/X            -   50 mm Yamaha TT-600                   -   50 mm Yamaha XT-600                   -   50 mm Yamaha XT-550                   -   50 mm   Color: silver or black anodised Price per pair Made in Germany by OTR with 10 years warranty! Shown spacers not included in delivery

Precisely CNC machined and strong RAID handlebar clamp set for Yamaha XT-660Z Tenere   The upper handlebar clamping plate provides a high torsional stiffness of the complete set. The handlebar height can be individually varied with additional spacers. We manufacture this clamps on modern cnc machines here in our own production. The avaiable versions are the height compared to the stock handlebar clamp height. Measured in mm between the lower end of the handlebar and the top of the triple clamps. The specified height refers to the lower edge of the handlebar to the upper edge of the triple clamp. +0 mm means the same height as standard, +20 mm means the handlebar position is 20 mm higher than standard. If the listed height is not enough for your needs, you can add additonal spacers shown in the 'accessories' section. New bolts are needed as well. OEM brake lines and clutch cables work up to a height 30mm more than stock.   Details: made from aircraft aluminium 7075 T6 high torsional stiffness handlebar position can be changed +/- 5 mm hight can be adjusted individually color: silver or black anodised additional spacer to lower or rise avaiable. See accessories Made in Germany by OTR 10 years warranty sold as a set   Fits all: Yamaha XT-660Z Tenere 2008-2016 Yamaha XT-660ZA ABS Tenere 2011-2016

Foam rubber to avoid blisters on long endurance rides. This are the best foam grips we have found. For long distance and multi-day events, rally helps to keep things comfortable. Thicker material for more comfort. On the desert races this are still the grateset grips. Their thickness is studied to cancel most of vibrations that you can find in rally races. With the Foam Rally Grips you have ultimate grip and maximum comfort. The foam absorbs a large part of the vibrations from the handlebars and provides high friction! The grips are produced with an open end so you can perfectly combine the grips with your hand guards!   Price per pair Color: black Measurements: Ø 22 mm (left) ; 25 mm right side Length: 125 mm

Handlebar Softgrips Rallye Timeless grips for rallyes. On the desert races this are still the grateset grips. Their thickness is studied to cancel most of vibrations that you can find in rally races. High quality material for best feeling, vibration reduction and durability. Price per pair Color: black Measurements: Ø 22-25mm / Long 125mm

Magura Hydraulic clutch for the Yamaha XT-660Z Tenere models. Constant pressure point, automatic adjustment, no need for maintenance, extremely good to batch, less operation power required, less weight. With an adjustable lever width, the HYMEC offers high ergonomics and the "fold-away" function prevents breakage when the motorbike falls over. Available in the standard length and an 8cm longer hose version for use with high handlebars or higher handlebar risers. MAGURA HYMEC - an easy-to-fit alternative to the mechanical clutch. With this system, the clutch lever and cable are replaced by a lightweight hydraulic system to improve clutch control. Hymec guarantees lower operating pressure, a constant pressure point, eliminates the hassle of cable adjustments and the very light clutch actuation ensures a perfect start every time. Hymec significantly improves driving performance - allowing the rider to feel the point at which the clutch is depressed and released. This product has been developed over many years and tested under the toughest imaginable off-road motorsport conditions. The world champions who have used it agree on its advantages, but the novice driver also benefits from it, for example when stopping at traffic lights. Hose available in a standard length or in a +8cm version to be used with high handlebars or risers. Facts: · Permanent play compensation, in other words the pressure point and the function of the clutch remain identical cold or hot. · Even wear characteristics and nearly maintenance-free. · Reduction of actuation forces by up to 25%. · Easy to install and route tubing. · Optimum lever kinematics and therefore improved metering ability. HYMEC improves vehicle performance considerably. The smooth-running hydraulics just makes it fun. · Magura HYMEC - a brilliant system for hydraulic actuation of a mechanical clutch. · Non-break forged lever with grip width adjustment and naturally with carbon tubing. · Filled with biodegradable mineral oil · Carbonium braided clutch hose · 25 % less hand power required due to the lack of friction within the clutch line. · Adjustable clutch lever · Minimal installing effort required. · No changes at the vehicle. · Safety switch remains. · With mirror mount · Delivered with newest clutch master cylinder version How does the hydraulic system work? The functional principle of the hydraulic system has been millionfold proved. It is based on the fact, that liquids cannot be compressed. On one side of line, the piston puts pressure on the liquid. The signal is transmitted to the piston on the other side of the line.  The size of the pistons defines the transmission ratio. If the face of the giver had half the size than that of the taker, the power of the taker would be double the giver's. The distance covered at the taker gets shorter due to the transmission. Compared to the serial clutch, the Hymec is much better in terms of effort and dosing ability. If you ever tried the Hymec, you would never give it back. The assembled hydraulic clutch just has to exchanged for the stock clutch. No modifications on the bike necessary! Fits all: · Yamaha XT-660 Z Tenere · Yamaha XT-660ZA ABS Tenere

Magura Hydraulic clutch for the Yamaha XT-660Z Tenere models. Constant pressure point, automatic adjustment, no need for maintenance, extremely good to batch, less operation power required, less weight. With an adjustable lever width, the HYMEC offers high ergonomics and the "fold-away" function prevents breakage when the motorbike falls over. Available in the standard length and an 8cm longer hose version for use with high handlebars or higher handlebar risers. MAGURA HYMEC - an easy-to-fit alternative to the mechanical clutch. With this system, the clutch lever and cable are replaced by a lightweight hydraulic system to improve clutch control. Hymec guarantees lower operating pressure, a constant pressure point, eliminates the hassle of cable adjustments and the very light clutch actuation ensures a perfect start every time. Hymec significantly improves driving performance - allowing the rider to feel the point at which the clutch is depressed and released. This product has been developed over many years and tested under the toughest imaginable off-road motorsport conditions. The world champions who have used it agree on its advantages, but the novice driver also benefits from it, for example when stopping at traffic lights. Hose available in a standard length or in a +8cm version to be used with high handlebars or risers. Facts: · Permanent play compensation, in other words the pressure point and the function of the clutch remain identical cold or hot. · Even wear characteristics and nearly maintenance-free. · Reduction of actuation forces by up to 25%. · Easy to install and route tubing. · Optimum lever kinematics and therefore improved metering ability. HYMEC improves vehicle performance considerably. The smooth-running hydraulics just makes it fun. · Magura HYMEC - a brilliant system for hydraulic actuation of a mechanical clutch. · Non-break forged lever with grip width adjustment and naturally with carbon tubing. · Filled with biodegradable mineral oil · Carbonium braided clutch hose · 25 % less hand power required due to the lack of friction within the clutch line. · Adjustable clutch lever · Minimal installing effort required. · No changes at the vehicle. · Safety switch remains. · With mirror mount · Delivered with newest clutch master cylinder version How does the hydraulic system work? The functional principle of the hydraulic system has been millionfold proved. It is based on the fact, that liquids cannot be compressed. On one side of line, the piston puts pressure on the liquid. The signal is transmitted to the piston on the other side of the line.  The size of the pistons defines the transmission ratio. If the face of the giver had half the size than that of the taker, the power of the taker would be double the giver's. The distance covered at the taker gets shorter due to the transmission. Compared to the serial clutch, the Hymec is much better in terms of effort and dosing ability. If you ever tried the Hymec, you would never give it back. The assembled hydraulic clutch just has to exchanged for the stock clutch. No modifications on the bike necessary! Fits all: · Yamaha XT-660 Z Tenere · Yamaha XT-660ZA ABS Tenere

The tapered X-Line handlebars from MAGURA: light, stable and easy on the joints. They also come with an even longer service life and are TÜV-tested. As a result of our patented manufacturing process the X-line handlebars offer a convincing strength to weight relationship. Ergonomically formed for increased comfort, proven in the Dakar Rally in the hands of the HRC team riders. High strength aluminium alloy with a ball blasted finish offers maximum stiffness and a long lifecycle. Although these handle bars do not have a cross-bar they are much stronger than usual handle bars. The conical aluminium handle bars are lightweight, stable, and gentle to the joints. With an even higher durability thanks to a shot peened finish. Because of the changed geometry a significantly relaxed driving is possible compared to the original. The bulged alloy handlebars from MAGURA are light, stable, reduced rider fatigue! Ball burnished finish for increased lifetime durability. All universal MAGURA handlebars are, of course, TÜV-approved and come with a certificate / ABE. If a registration is required, please check before purchase whether the desired vehicle is listed in the ABE. Otherwise, there is the possibility of registration by expert opinion. Details: · Magura X-Line - double butted handlebar · the original armatures and controls can still be used · available in various geometries · easy mounting within minutes · ball burnished finish · To be used with 28mm handlebar clamps · Street legal - comes with TÜV certificate for various models · Please check with measurements if this bars will fit your bike. If you have concerns about this, please ask.