The genuine DAYTONA 4 heated-grips, thousandfold proofed and tested. The grips are made of rubber - a lot of cheap grips use plastic which are slippery when in wet conditions! The waterproof switch which can be mounted on the handlebar or the cockpit. You can use the Daytona heat grips on almost all stock 22 mm and 28mm (Magura, Pro Taper...) handlebars. Tested in the german motorcycle magazine 'Tourenfahrer' (Issue 02/2009): "The Daytona grips are the ones with the best heating performance" They tested 6 different pairs of heated grips.   · 4-Level Heat Control with switch, you have more choices for optimum warmth in all conditions · 4-Color LED Indicators display current heat level at a glance · Intelligent Heat Control Unit that memorizes heat setting from last use · Quick Heating function makes grips warm enough in a few short minutes on start up · Double layered Rubber Grips offer softer and more comfortable grip feeling · Waterproof - Waterproof design guarantees safety and greater reliability · Length of grips 128mm · Fit almost all bikes with 22mm (7/8") handlebars

Daytona VI heated grips with 4-Level integrated switch and Battery Protection   DAYTONA VI heated-grips with nearly invisible integrated switch unit. The missing external switch is a great advantage e.g. on long trips, as there is a part less than can be damaged. Due to the integrated switch the whole unit is 100% waterproof! Perfect for adventure bikes. The grips are made of rubber - a lot of cheap grips use plastic which are slippery when in wet conditions. The waterproof switch is placed in the grip - easy access and easier mounting. You can use the Daytona heat grips on almost all stock 22 mm and 28mm (Magura, Pro Taper...) handlebars. Quick start option for quick warm hands. Power / heat adjustable in 4 steps.   Tested in the german motorcycle magazine 'Tourenfahrer' (Issue 02/2009): "The Daytona grips are the ones with the best heating performance" They tested 6 different pairs of heated grips.   Details: 4-Level Heat Control with built in switch, you have more choices for optimum warmth in all conditions+ 5-colour LED indicator nearly invisible integrated switch Quick Heating function makes grips warm enough in a few short minutes on start up Double layered Rubber Grips offer softer and more comfortable grip feeling Waterproof - Waterproof design guarantees safety and greater reliability Length of grips: ~120mm with battery protection (Auto-off)

Avaiable for the Power Commander V is the add-on Auto Tune module which allows for live, closed loop EFI tuning. Based closely on Dynojet's new Wideband Commander 2 it features a OEM quality Bosch Wideband O2 sensor. The Auto tune module allows users set a demanded air/fuel ratio in the Power Commander V software and the Auto tune will make adjustments in real time. When enabled there is an AFR table with the same 250 RPM increment resolution as the fuel table. The Auto tune can be configured for minimum run time before live sample as well as maximum +/- fuel adjustments in relation to the base map. The Auto Tune kit can also use the Dynojet map switch or any open/closed switch which allows the user to switch between live tuning to the parameters set thru the PC V software or the base map in the PC V unit. You can leave the map switch in "live" mode, or if you want to write the fuel map you can connect to the PC V software, retrieve the fuel trims and either write them to the map or clear them. We have also compared several Auto Tune derived maps to dyno tuned maps and the results were impressive. A very important requirement for building a good tune is to have a close base map to start out with, as the Auto Tune writes its fuel trims off the base PC V map. The Auto Tune module does require some basic wiring from the sensor harness into the modules. The Auto Tune module is a very good choice for those with a unique mods, where a dyno is not available, or for those looking for the ability to tune in real time. The ultimate combination we recommend is combining a full dyno tune session with the Auto tune. We build the map for the best combination of performance and efficiency, and then implement the AFR's we developed into the Auto Tune AFR table. This strategy will provide the best performance under all conditions. · Live fuel mixture setting while driving · Basic setting already programmed · to be used as a mobile setting module · incl. OEM quality Bosch Wideband O2 sensor · can be used only with the Power Commander V · NOT FOR USE WITH 2-CYLINDER BIKES (e.g. XT1200Z)!!!!  

Frequency stabilised flasher relay for LED indicators with a switching capacity of 0.1-100 watts.   Water and shock resistant, for use with combination of standart 21w and LED indicators or only with LED indicators. Works also on bikes with hazard indicators! You only need 1 relay for 1 bike - doesn't matter is you have 2 or 4 new indicators.   Please note: This relay has a switching capacity of 0,1-100 watts. In newer vehicles, the power consumption of 4 turn signals can be much less than 1 watt. Especially if an LED for the turn signal indicator is used in the dash board as well, the cockpit LED might not "flash". In this case, the LED for the turn signal indicator does not work correctly. Please install a resistor on one of the right or left hand indicators. Also the relay with part number EL-BLR-4P provides a reliable remedy. No additional resistors needed. EL-BLR-4P is our recommendation to use e.g. with Yamaha Tenere 700 (up to year 2022). Newer models does not have indicator relais anymore)   Fits e g.:   Yamaha XT-660R/X Yamaha XT660Z Yamaha XT-660ZA Tenere ABS Yamaha XT-1200Z Yamaha XT-1200ZE Yamaha MT-03 Yamaha MT-07 Yamaha Tenere 700 up to 2022 (without factory LED indicators) Yamaha Tenere 700 Rall up to 2022 (without  factory LED indicators) etc...

Frequency stabilised flasher relay for LED indicators with load range from 0.1-100 watts   Especially when you have problems with the dash board lights this relay is be the solution. Water and shock resistant, for use with combination of standart 21w and LED indicators or only with LED indicators. Works also on bikes with hazard indicators! You only need 1 relais for 1 bike - doesn't matter is you have 2 or 4 new indicators. Additional ground connetion wire.   Fits e g.:   Yamaha Tenere 700 up to 2022 (without factory LED indicators) Yamaha Tenere 700 Rally up to 2022 (without  factory LED indicators) Yamaha XT-660R/X Yamaha XT660Z Yamaha XT-660ZA Tenere ABS Yamaha XT-1200Z Yamaha XT-1200ZE Yamaha MT-03 Yamaha MT-07 .....

Hepco-Becker LED auxiliary headlights NOVA - Let there be light!   With the Nova LED auxiliary headlight set from HEPCO&BECKER, you get everything you need to improve the visibility and safety of your motorcycle. This set includes powerful LED auxiliary headlights, a universal mounting set, a cable set, a switch, instructions and a tool set to conveniently mount and control the headlights. The Nova LED auxiliary headlights not only provide improved illumination of the road, but also give your motorcycle an attractive appearance. Easy installation is made possible by the universal mounting kit and cable set supplied. Increase your safety and add an appealing design to your motorcycle by using the HEPCO&BECKER LED auxiliary headlight set Nova.   These auxiliary lights are equipped with a robust, powder-coated aluminum housing and offer two switching levels for different light intensities. The universal mounting fits on tubes with a diameter of 18mm to 25mm, either standing up or hanging down.   Installation is straightforward via the battery, without connection to the vehicle wiring harness. With a special control unit and illuminated, splash-proof switch, you retain full control.   Details:   High-power LEDs with two switching levels at 2,500lm - 4,350K / - 5,500K ECE-tested and approved Improved lighting conditions in road traffic Universal mounting on engine or tank protection bracket with Ø18mm - Ø25mm tube, can be mounted upright or suspended Complete headlight set; incl. 2x LED auxiliary headlights, 1x switch, 1x cable set, 2x clamps incl. reduction sleeves, 1x instructions, 1x tool set Connection only via the battery, no connection to vehicle wiring harness required No external operation by third parties, thanks to a special control unit with automatic voltage control Waterproof and dustproof to IP67 Headlights can be flexibly switched on using the switch on the handlebars

KOSO HG-13 heated grips with almost invisible integrated switch and 5-way adjustment. The KOSO HG-13 are probably the most visually appealing heated grips. In addition to the top look, the grips are of very high quality and technically very well thought-out. The new elegant design with revolutionary heating structure warms your hands faster than ever before. With the new integrated 5-step regulator, the temperature can be individually adjusted to the rider's needs at any time. You no longer have to worry about bad weather with our heated grips. The absence of an external switch considerably reduces the susceptibility to faults, especially on long journeys. Also, no water can get into the switch. Ideal for adventure and touring motorbikes. Another special feature of the HG13 heated grips is the "low-voltage battery" protection. The system detects when the battery voltage is too low and then automatically switches off the heated grips. This ensures that the battery still has enough voltage to start the engine or use the motorbike. The quality grips are made of rubber, not plastic like many cheap grips. The rubber grips are equipped with cable kink protection. Suitable for all 22 mm and 28 mm handlebars. · 5-Level Heat Control with built in switch, you have more choices for optimum warmth in all conditions · Almost invisibly integrated, 100% waterproof switch · Open ends for mounting bar end weights or hand guards. Additional end caps included · Quick Heating function makes grips warm enough in a few short minutes on start up · integrated battery tester that indicates if the battery is sufficiently charged · Protection device that automatically switches off the grips if the voltage of the motorbike battery is too low. · Double layered Rubber Grips offer softer and more comfortable grip feeling · Waterproof - Waterproof design guarantees safety and greater reliability · Length of grips: 120 mm or 130 mm · Fit almost all bikes with 22mm (7/8") handlebars Note: 130 mm version perfect for Yamaha Tenere 700 and XT-1200Z Super Tenere

LED COB Indicator + Tail- and Brakelight Combi NADO, Aluminium Housing, dark tinted glas   Very elegant and high-quality LED indicator Brake- / Taillight combi with housing made of black aluminium with powerful and ultra-bright COB LED technology and integrated tail light. Same technology for the additional brake light. The latest lighting technology in a black metal housing and heavily tinted glass. Very bright LED indicator with COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. A visual highlight on every motorbike. Manufactured to a very high standard - 100% dust and waterproof - no problems with moisture! Angular look in dark tinted clear glass design. The dimensions of the indicator-brake light head are just 48x18 mm! Extremely small and yet much more visible than many larger indicators.   The indicator-tail light combi is TUV-approved (ABE) for the rear. Price per pair.   Available also as indicator only or indicator/tail light combination.   Dimensions: A: 48 mm B: 63 mm C: 18 mm Bolt M8 x 1.25 mm, length approx. 20 mm.   Connection: yellow wire = Tail light (+) red wire = Brake light (+) blue wire = Indicator (+) black wire = Ground (-)   Depending on the motorbike model, either a pair of resistors or an electronically controlled, load-independent flasher relay is additionally required! See accessories.

LED Indicator and Drive- and parklight combination. Extra safety due to bright drive light integrated in the front indicators.   Very elegant and high-quality LED indicator with housing made of black aluminium with powerful and ultra-bright COB LED technology and integrated drive or park light light. The latest lighting technology in a black metal housing and heavily tinted glass. Very bright LED indicator with COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. A visual highlight on every motorbike. Manufactured to a very high standard - 100% dust and waterproof - no problems with moisture! Angular look in dark tinted clear glass design. The dimensions of the indicator-drive light head are just 48x18 mm! Extremely small and yet much more visible than many larger indicators.   Available also as indicator only or indicator / Tail-Brake light combination.   This indicator-drive light combi is TUV-approved (ABE) for the rear. Price per pair.   Dimensions: A: 48 mm B: 63 mm C: 18 mm Bolt M8 x 1.25 mm, length approx. 20 mm   Connection: (GE) yellow wire = Indicator (+) (WS) white wire = drive light (+) (SW) black wire = Ground (-)   Depending on the motorbike model, either a pair of resistors or an electronically controlled, load-independent flasher relay is additionally required! See accessories.

Very elegant and high-quality LED indicator with housing made of black aluminium with powerful and ultra-bright COB LED technology.   The latest lighting technology in a black metal housing and heavily tinted glass. Very bright LED indicator with COB technology (Chip On Board). The new LED chip embedding for high-performance LEDs achieves a very high luminance with currently the best possible efficiency and service life. In addition, higher light values can be achieved than with conventional LEDs. A visual highlight on every motorbike. Manufactured to a very high standard - 100% dust and waterproof - no problems with moisture! Angular look in dark tinted clear glass design. The dimensions of the indicator head are just 43x16 mm! Extremely small and yet much more visible than many larger indicators.   Available also as indicator/drive light or indicator/brake-tail light combination. The indicators are E-approved (ABE) for front and rear. Price per pair.   Dimensions: A: 43 mm B: 58 mm C: 16 mm Bolt M8 x 1.25 mm, length approx. 20 mm.   Depending on the motorbike model, either a pair of resistors or an electronically controlled, load-independent flasher relay is additionally required! See accessories.

High-quality SMD LED indicator and brake / tail light combination in a black aluminium housing.   Ultrabright SMD LEDs! 5 powerful SMDs make sure you have an unbeatable bright flash and brake light. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with smoke grey glass and orange LEDs. The measurements of the indicator head are only 35x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Also avaiable as an indicator only. E-marked (street legal) for rear use. Price for a pair.   Measurements:   Length 44 mm x Height 13 mm  x Deepth 15,5 mm (including lens) Rubber arm: D. 13 mm, L. 11 mm Bolt M8 x 1.25 mm, Length ~ 20 mm   Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories

Why are installing load resistors necessary for LED turn signal lights? Resistors for LED indicator, which have a much lower power consumtion compared to standart 21w indicators. If you don't install load resistors (also known as equalizers) with LED turn signal bulbs, you will experience the notorious hyper flash issue. Hyper flash is exactly what it sounds like, where the turn signal light flashes rapidly and is almost headache inducing. Not only is this ugly, but you may also attract the police who think your bulb is burned out. Just connect the resistors between the indicators and the wiring harness. Delivered as a set for 2 indicators. For the Yamaha XT-660 models as an alternative also an electronic flasher relais can be used. Resistors avaiable in two load values: · 27 Ohms / 5 Watt · 6.8 Ohms / 25 Watt (for bikes with warning flashers like e.g. XT-660, XT-1200Z)  

High-quality LED indicator or indicator in a black housing. Ultrabright SMD LEDs! Ultra powerful SMDs enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with clear glass and orange LEDs. The measurements of the indicator head are only 36x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. E-marked for front and rear use. Price for a pair. Measurements: A: 36 mm B: 13 mm C: 25 mm Bolt threat M8 x 1.25 mm, Length ~20 mm. Depending on the bike you might need a pair of resistors or a new electronic LED flasher relais. See accessories

The LED indicator Stealth is now avaible in the even smaller Stealth II version! Sharp 'Stealth' look with clear lens design. Cover glass clear, LED glow in orange. Measures of the indicator head only approx. 29x18mm! Extremly small but very bright light. The indicators are E-appoved, for use the front and rear. Sold as a per pair.

High-quality sequnetial LED indicator in a black anodised aluminium housing. Ultrabright SMD LEDs! Ultra powerful SMDs with new sequential Blink technology enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Modern look with clear glass and orange LEDs. The measurements of the indicator head are only 51x13 mm! Extremely small but brighter than a lot of other, much bigger indicators. E-marked for front and rear use. Price for a pair. · Turn signal E-marked for front and rear · Aluminum housing black · slightly tinted glass · 12V / 3.2W · rubber mounted · New sequential Blink technology · Cable length 18cm · Overall length: 88 mm · Dimensions: L 51 x Ø 13mm · Connection: M8 Pair · Price per Pair Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories  

High-quality SMD LED indicator in a black aluminium housing.   Ultrabright SMD LEDs! 5 powerful SMDs make sure you have an unbeatable bright flash light. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with smoke grey glass and orange LEDs. The measurements of the indicator head are only 35x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Also avaiable as an indicator/tail/brake light combination E-marked for front and rear use. Price for a pair.   Measurements:   Length 44 mm x Height 13 mm  x Deepth 15,5 mm (including lens) Rubber arm: D. 13 mm, L. 11 mm Bolt M8 x 1.25 mm, Length ~ 20 mm   Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories

High-quality LED indicator or indicator/tail/brake light combination in a black aluminium housing. Ultrabright SMD LEDs! 3 ultra powerful SMDs enable the indicator in a very small housing. Very precisely made - 100% dust and waterproof. No problems with humidity! Future design with clear glass and orange LEDs. The measurements of the indicator head are only 32x12 mm! Extremely small but brighter than a lot of other, much bigger indicators. Avaiable as indicator or indicator/tail/brake light combination E-marked for front and rear use. Price for a pair. Measurements: A: 32 mm B: 45 mm C: 11 mm Bolt threat M8 x 1.25 mm, Length ~20 mm. Depending on the bike you might need a pair of resistors or a new electric LED flasher relais. See accessories  

The current highlight amongst the LED indicators now avaiable. Strong 'SPEAR' look with tinted glas. Latest LED technology with very bright orange light for a safety plus. Small but very bright light. E-marked for front and rear use. Sold as a pair for front or rear use. · Material: plastic, black, glas tinted · perfect look for your bike · 2 indicators per set · Dimension approx.: L: 51 x W: 25 x H: 23mm · needed flasher relais or resistors to be ordered seperately · easy to fit

The latest LED indicator highlight! Angular stealth look in clear glass design. Clear cover glass, LEDs illuminated in orange, indicator tip with a stylish orange design. The dimensions of the turn signal head are just 45 x 25 mm! Very small and super bright. A 1-euro piece for comparison in the picture.   The total length of the indicator, without thread, is approx. only 60 mm. The turn signals are E-approved for front and rear.   current, bright LED technology for added safety plastic, black, glass smoked grey optically perfectly matching turn signals approx. dimensions: L: 45 x D: 25 x H: 15mm price per pair   Depending on the motorbike model, either a pair of resistors or a new, electronically controlled, load-independent flasher relay is additionally required! See accessories.

Very noble and high-quality LED running light indicator with housing made of black anodised aluminium.   Powerful and ultra-bright sequential SMD LED technology. Manufactured to a very high standard - 100% dust and waterproof - no problems with moisture! Modern look in dark tinted clear glass design. Cover glass dark tinted, LEDs glowing orange. The dimensions of the indicator head are just 48x18 mm! Very small, but due to the very conspicuous sequential flashing technology still much more visible than many larger turn signals. The turn signals are E-approved for front and rear. Price per pair.   Turn signals with E-mark for front and rear Stylish, sturdy aluminium housing, black anodised dark tinted glass 12V / 4 W rubber-mounted M8 treat new sequential flashing technology cable length 40 cm total length: 92.2 mm dimensions: depth 15.8 x height 18.2 mm thread: M8 Price per pair   Depending on the motorbike model, either a pair of resistors or an electronically controlled, load-independent flasher relay is additionally required! See accessories.

LED indicator Slight with newest SMD Technology New look with glas in front and rear direction. Flashing to the front direction very bright, to the rear darker. LED in orange colour. The measurements of this indicator are only approx. 45 x 10 mm! Extremely small but very bright! The overall length of the indicator (without threat) is about only 60 mm. E-marked for front and rear use. Newest SMD LED technology for your safety. Avaiable in black or stylish blue, red or white! Depending on the model you might need a pair of resistors or an LED flasher relais! See accessories. · newest SMD Technology · Meassurments: 45x10mm · Length about 60mm · street legal · avaible in different colours · Price per pair

Smoke grey tail and brake light with very robust LED technic. Very cool look in exchange for the red stock light. No soldering necessary - just exchange with the stock tail light and plug it in. No longer changing defective bulbs! Delivered with all needed parts and the correct plug. TUV approved - street legal. Included LED license plate light. Fits all Yamaha XT-660R and XT-660X.

Universal LED tail light with 8 LED, light tinted glass. Integrated rear light, brake- and license plate light. Delivery complete with connection cable (connector may has to be addapted). With its pointed shape the tail light blends in perfectly with the rear fender of e.g. the XT 660. For all those, who want to give the rear end of their XT an individual look! Does not include mounting parts. E-marked (Street legal) Price for 1 piece

High Quality Waterproof Lithium-Ion (LiFePO4) battery for the Yamaha XT-660R/X and XT-660Z . In the meantime the newest Lithium-Ionen-Battery generation is that good, that we have tested them. Perfectly fitting for the XT660 the mounting is very easy - just do the exchange with the stock battery - ready to use. We  now use this batties very often in our bike build ups - especially when you need to save weight! Overcharge Protection (OP) The Skyrich battery has an advanced battery management system (BMS) which, in addition to the balancers (ensures even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage of over 14.9V. The Lithium Ion batteries give you an unbeatable weight / price compared to standard or lead-acid batteries. The weight is about 70% less compared to the stock batterie, that means you safe more than about 2 kilogramms of weight! DO NOT COMPARE THIS BATTERY WITH LOW QUALITY CHINA PRODUCTS!! All batteries have a battery-condition-indicator. Simply press the test button. When all three blue LEDs on the battery are flashing it is fully loaded. 2 LED lights only, it is charged only half (med). At least when only one LED lights (low), the battery must be charged. DUE TO AIR FREIGHT RESTRICTIONS NO AIR FREIGHT SHIPPING OUTSIDE EUROPE MAINLAND !! IF IN DOUBT, PLEASE ASK BEFORE ORDER. Following advantages speak for JMT lithium-ion batteries: · About 1/3 the weight of comparable lead-acid battery · Unbeatable ratio of cost / weight savings · Because they contain no acid mountable in any position · Does not contain heavy metals · Overcharge protection · Balanced discharge / charge of all cells by Balancer · Quick charge with a high charging current possible (up to 90% in 6 min) · Very low self-discharge (up to 5% per month) · Even at high temperatures still good performance up to 60 ° C · Reliable technology and high durability · Waterproof Although the battery is extremely lightweight for everydays use, it should be noted that the starting capacity is limited at temperatures below zero degrees Celsius. · 12 V maintenance-free lithium-ion (LiFePO4) battery · Energy 36 Wh · Dimensions in mm 150x65x92 · Recommended charging current 1.5 A · Maximum charging current for fast charging 15 A · Weight 0.7 kg · Starting current 190 A · waterproof Fits for all: · Yamaha XT-660R · Yamaha XT-660X · Yamaha XT-660Z Tenere DUE TO AIR FREIGHT RESTRICTIONS NO AIR FREIGHT SHIPPING OUTSIDE EUROPE MAINLAND !! IF IN DOUBT, PLEASE ASK BEFORE ORDER.